ฝัง
- เผยแพร่เมื่อ 11 ส.ค. 2019
- I will show you why your deck spindle failed and show you how to rebuild it. Replace bearings and make it last for years. Covers almost all riding mowers.
Very easy fix and upgrade to spindle.
Purchase replacement bearings here; amzn.to/3xgW7Nw
Thread Tap ; amzn.to/3DbCIS6
Drill Bit ; amzn.to/3Bb7h7A
Grease Zerk ; amzn.to/3UcHbKq
High Quality Bearings at an affordable price here: amzn.to/3e89hGe
Try Amazon Prime for Free; amzn.to/3L88YHP
"As an Amazon Associate I earn from qualifying purchases." - แนวปฏิบัติและการใช้ชีวิต
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 5](http://i.ytimg.com/vi/g5wpgeAIzMs/mqdefault.jpg)
Now I know ! Other than the info, no irritating music, no self promotion, just what it is, why it is and what to do ! A good job makes the best info videos. Thanks !
Glad you enjoyed it!
Thank you
Finally! A guy who knows his stuff and is willing to pass it on to others. Thank you sir!
Thank you.
Thank you Sir!
You make things easy to understand. And your low-keyed voice is calming. Appreciated.
Thank you
Excellent Glen this is a prime example of the usefulness of TH-cam and its educational benefits. I’m off to disassemble my mower deck. Thank you
Glad it helped
Love it; you rock!!!❤❤❤❤❤ Thank God an honest man showing an easy way to make the original design alot better!❤ drill sizes and thread sizes are key!!!! I livevyou man!!!!!!
I FIRED MY LAWN REPAIR SHOP YESTERDAY! THEY HAVE NO HEART; YOU HAVE WHAT THEY DON'T❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
I appreciate that! Thank you sir!
Great job showing and telling, good old Texas been there did that as a trucker good people out there. I from Tennessee on the East side next to the hills. Well thanks for showing on them spindles,I heard about doing that to the spindles but not see it. So I’ll do that to mine, and see if it works i sure it will work. So thanks again for showing telling y’all have a great day and we’ll see ya next time see ya bye.
Thanks man my cub cadet one just went out after 5 years. Grinding and shaft moving up and down.
Another excellent video by Glenn! Last week adjusted valve's on my Kohler 7000 series engine thanks to Glenn's other video on proper valve adjustment. Engine runs very smooth and strong. Thanks for sharing your lifetime of acquired knowledge Glenn. My next project may very well be rebuilding my spindles after viewing your video.
Thank you William. Glad you enjoy the videos.
Thanks, I just bought a ZT1 50 a couple of weeks ago and have been watching videos on this problem. Now I will make sure mine is not going to give me any problems.
Many thanks indeed for such an informative and truly helpful video - I've just bought some new spindles, as I'm sure at least one shaft was bent. I will be removing the inner seals and tapping in a weep hole screw on each new housing, as the hole has been left open. Many thanks again, all the best!
Thank you
great video, explaining step by step on how to replace the sealed bearings mower deck came with. saves about $110 in parts and labor. thanks!
Glad it helped. Thank you
Awsome information dude! The lawnmower repair shops have gouged me by way overcharging and underperformed!
I started hearing one of the deck spindle bearings going out on my Husqvarna lawn tractor. The top bearing had the seal on both sides, but the bottom bearing had the inner seal removed. The top bearing was the one that was failing. I took the other spindles apart and fixed them while I had the deck off the tractor. Good job explaining how to do this upgrade.
Thank you
I appreciate the video fella saved my brother inlaw some money he thought he needed a new mower he always wants to replace it instead of fix it.
Thank you.
Thanks for the super informative video. I never knew I could just swap out the bearings until now.
Thank you
You are awesome. I just bought this cub cadet brand new and I’m going to do this to it , I’m not even going to use it until I know I got lots of grease there at all times !
Planned obsolescence is the name of the game and most company's do this in some way shape or form. Thank you for the tutorial on this as I will def be doing this myself.
Thank you
my friend that just earned a new subscriber, my spindle just destroyed it's lower bearing, as in blew it apart. the mower has a grand total of 74 hours on it, no zerq from the factory, new ones on order and I will be doing just as you have taught me. I am forever in your debt! thank you very much kind sir!
Thank you
Thank you SO MUCH! this is awesome. We do not have a good lawnmower shop near me any longer, and I need to replace the spindles on my TB Pony.
You're welcome!
Great video! Wish all rebuild videos were like this!
Thank you. Will have new videos soon.
THANKS, you're a lot smarter than the people who made the other videos I've watched!
You welcome. Not sure I agree with the smarter part. Maybe older and more experience. Lol. Thanks!
@@IFIXIT4U Well, maybe just COMMON SENSE but great no matter what it's called.
Nice job , doing what you did make the bearings last a lot longer .
Thanks 👍
I appreciate you sharing your expertise in how to overcome the industry's engineered obsolescence of parts, while also saving us money and future headaches. Bravo!!
Thank you
Great Video I am doing this today to my 15 Year Old Cub Cadet RZT 50 Today Thanks for the Video !!!!!!!!!!!
Thank you Cuz !
Thank YOU! I was on my 4th set in 6 years! Got new ones sitting in front of me. Just need to get the zerc fittings…
Thank you
Thanks. Very well done video. Everything was well explained, and your demeanor is extremely smooth.
Thank you kindly!
I've done this with my cub cadet zero turn replacement spindles. Took apart three brand new spindles, removed one side dust seal on both bearings, tapped weep hole, added 10-24 screw, filled with grease, very solid, should last a good long time.
Thanks for doing this and posting your video. It helps the guy in the backyard who needs to see how repairs can be made instead of just buying more parts. Thanks again from Joe in Ohio .....PS. Very straight forward in your explanations !!
Thank you.
You are a god send my friend! The way they should have been made in the first place!!! You are right that so many things are engineered to fail in order to make money!
Thank you
Good idea hats off to ya. Got one thing to add they have spring loaded vents have used for long time. They will release the grease so not to put too much. Then they seal up with the spring loaded. To be honest I forgot about these things lol till I watched this. Thanks.
Thank you sir.
Yes I am familiar with those but I do not have a part number or source. Let us know if you have that info.
Nice! Neat! And fast! The whole video is a pure and simple work of craft art!
Thank you very much!
you could use a (zerkstyle) pressure relief valve instead of the weep hole bolt. they come in different low pressures. that would stop excessive pressure build up and not allow it to blow the seals out. and you don't have to take the bolt out when you grease the spindle.
I am in the process now, of buying all of the relief valve pressure sizes (1 psi through 80) to test. To see how much pressure on average it takes, to blow out an outer seal(s). What is your early guess on how much that is?
@@SteveKluver it depends on what type of seals the bearing has, some are rubber seals ( which only hold a few psi ) or there are steel shielded bearings ( which i assume hold more psi - but not sure )
Great video Glenn. I believe the 2RS stands for 2 'rubber shields'. Bless Your Bunions!
Thank you
Wow we came from Greenville, Tx after moving there years ago wow. Great video! Just bought a 54" Lesco Commercial Plus and it's time to do this. Looks fairly straight forward too
Thank you
good idea my dad had shown me that when i was a teenager back in 60s when sealed was just coming out and i have passed it along to my boys also simple ideas last forever
Thank you
Great video just replace one of the bearings on my machines works just fine now thank you once again👍👍
Thank you
I really enjoyed this video! Lots of very clear information. Loved it!
Glad you enjoyed it!
Thank you
A truly talented and gracious instructor,willing to explain this in easy to understand steps. Oh and the pressure relief hole is so you don’t have so much pressure to blow the bearings out the ends of spindle. Great job
You're very welcome!
If I were to do this, I would first mark the ideal spot so you had grease gun access to the Zerk.
Second and most important I would us a quality grease perhaps old fashioned Front Wheel Bearing Grease and firmly pack the new bearings *BEFORE* installation. It takes a lot of grease to fill that cavity if indeed you got all the air out. Vents are normally at the top - again check for installed access and there is no guarantee you have all the air out. It would be interesting to disassemble this Spindle after greasing to see how well it performed.
Simply Repacking NEW Bearings and replacing the seal seems like a good idea as well.
Thank you Gord.
Best video on the topic. Thank you!
Wow, thanks!
Well done!
Thank you
Outstanding video sir! Thank you.
Glad you liked it!
this is the video I have seen, 5 start ,excellent.
Thank you
Excellent video sir. Just followed your advice on my 3 cub cadet spindles today. Those old ones were rough!
Thank you.
Alright straight forward video . Thank you
Thank you
Nice clean work there brother! Excellent video!!!
Thank you! Cheers!
Thank you for your video, I been wanting to add grease fittings to my craftsman mower deck spindles
Glad I could help
Great Video...Saved me a lot of time...Thanks
You're welcome!
Thanx for the info, I’ll be doin this on my ztr.
Excellent video. Sadly, most folks purchasing a riding mower from a big box store these days don't even know what a grease gun is. Fortunately, for the rest of us, this is an easy and inexpensive solution that will keep your deck spindles in great shape for years to come.
Thank you
Excellent video, really good content, liked the way you presented it! God bless and keep you safe!👍
Thank you kindly
I buy the replacement bearings at Greenville Bearing, and to heck with using MTD parts, that way I get Timkin bearings at a much better price, and I know that they're a quality bearing not something from China or Thailand.
I must have missed this video somehow, and then come by it randomly..
I was searching for the best way to replace drive belt on cub cadet Zforce 60" deck with the steering wheel version.
Buddy of mine smoked the drive belt when it got a small twig caught on between the pully and the belt.
He works 6 days a week 10 hours a day, and typically his tormentor has more things planned for him to do than two men could get done with one day off.
So I try to give him a hand when I get a chance, but generally try not to let the Evil one know, as we don't exactly see things from the same prospective.
As I tend to not tolerate her hateful ways, and she's got a mouth that two bars of Lava soap couldn't clean up if they were both brand new unopened bars.
I figured this little secret out long time ago when I had one eat the spindle housing up due to bearing locking up on my dad's old mower way back before he passed in 98.
I knew he'd always made a point to grease them at least 3 times a year, and when he called asking me to come by and get the pieces so I could pick up a new one for him.
I got to looking at the different pieces, and believe it was a sears parts store over in Garland that had the whole thing.
I asked the counter man if he just sold the spindle housing and the bearings.
He looked it up on old micro fish system they had a got a funny look on his face.
He asked me how I knew that, because up until that moment he'd never realized that they carried everything to build a complete spindle setup.
Then he surprised us both, because he added the cost of each component that made the whole thing.
He says, you ain't gonna believe this, because I don't.
I can sell you everything separately cheaper than assembled by a good percentage at that.
That is the day I knew that we were being scammed big time by the manufacturers.
That's before everyone realized MTD, was actually building multiple brands from a general stock of pieces with the exception of the big boys like JD, Troy built, craftsman, and cub cadet who had priority parts exclusive to them, but MTD did the assembly.
Then you could mix and match parts from the lower end brands to get the same parts, but at a very reduced price compared to a bigger name if you did
you're homework.
Glenn I still amazed that you do this for people, because it has seriously got to have a effect on your profits by a fairly hefty percentage my friend.
I know I've said this a hundred times, but I really need to stop by and tell you thank you in person, because I've definitely picked up a good bit of knowledge from you that I know cost you are someone around Greenville some profits.
I still chuckle every time I hear someone fussing about gophers and such.
Now if you ever come up with a way to run crayfish off without a chunk of bacon an a string, because I'm pure tired of those concrete castles they live under.
F-A-B-U-L-O-U-S video. Covered so much info that I needed.
Thank you. Glad it was helpful.
Very well explained going to do that to mine
Thank you
Drilling a couple of 1/8" holes in the center spacer will assist in dispersing the grease. It will also prevent the shaft from being galled or rusted.
Invaluable !
Good advice ! They figure out how to make it. Then they figure out how to make it break !
Those seals will not take very little pressure to push them out .
Do like the man just suggested "!"
The 1/4" weep hole is a must or the grease will push the upper ones out .
BTW, " Great video ..
very well done and right on point. nice job!
Thank you kindly!
Thank you for the tutorial. Must do change out mine are really bad.
Glad it helped. Thank you.
Helped me alot, my guy. I appreciate it.
Thank you
What a great informative video. Thank You!
You are so welcome!
That was a very simple video with good information thank you
Glad it was helpful!
very very good instructions. thank you SIRRRRRRR👍
You are welcome
amazing work my friend, those spindles DO NOT come cheap, I don't care what anyone says... I rather rebuild the OEM spindles than buying 3 or 4 new ones in the future.
Thanks.
I replaced one on a 24 HP Craftsman when I caught one blade on a neighbour's tree root. Normally I creep very slowly over those roots so that the mower deck does not bounce. This time I was too much in a hurry!
Anyways, the new assembly complete with bearings and spindle cost me CDN$36.00, delivered. Not a bad price I think.
Great video Glen ! I have a JDZ425 with same bearings 6204-2RS . Have a good 1 down there in the Lone star . I have kin over in Waco
Thank you.
Great video, only thing I would do differently is to go ahead and pre- pack the bearings before I re- install them .
Great idea
Thanks a lot for the wonderful video.
Thank you.
Great video. Thank you.
Glad you liked it!
Nicely Done!...Replacement Bearings that size are also available with a metal shield on one side which would be even better. I would think you would want to hunt out the right location for the zerk fitting to ensure you can reach it with a grease gun fitting once the spindle is installed in the deck and the deck is back in the mower..
Thank you.
Very good info and great video thank ya sir..
Thank you
VERY GOOD INFO SIR!!
Thanks and welcome
Outstanding!
Thank you kindly!
Excellent Video !
Thank you very much!
Excellent. Well done.
Many thanks!
Very helpful video thank you!
Thank you
Excellent sir!
Thank you kindly!
Thanks for sharing this!
Glad you enjoyed it!
First video I have seen that gets the zerk fitting relationship correct. You have to have the pressure vent as well as the zerk! A note of personal preference, I like to put the zerk in as close to the blade-side bearing as possible and the vent as close to the pulley side bearing as possible. Keep in mind it's a personal preference, the grease will still follow the conservation of energy law i.e. the path of least resistance. Because of the greases viscosity it won't "push" out the vent hole until the internal void is full. Great video and good job to the author!
Thank you !
I would add, the weep hole should be as high as possible since water will be on top and first pushed out.
To add...pre load all the grease in the spindle before assembly. This way you know it's full.
How would you know what pressure relief to use?
Well explained ,
Thanks
# 7 drill bit for 1/4-20 tap !
Thanks
Oh come on! Do you know what the difference is?
Great video thanks for sharing
Your awesome.thanks for sharing your video 👍
Thanks for watching!
Excellent video.
Thank you very much!
Great job on the video
Glad you enjoyed it! Thank you!
Thank you buddy that was a good idea
Thanks man, great job...
Glad it helped .
Greg from W.C. TX ?
@@IFIXIT4U naw...Ga.
amazing, definitely doing this with the new ones i just ordered off amazon probably cheap chinese junk but i guess all of it is really
Thank you
You're welcome
Very good idea
Thank you! Cheers!
Thank You for the great tip!
Glad it was helpful! Thank you
Love this video. I can’t get the shaft to come out of the housing though. I think I need a bigger hammer.
Thank You Sir
Liked and subscribed. Great info and I appreciate it.
Awesome thanks
Welcome 😊
Thanks!
Wow! Thank you very much!
EXCELLENT!!
Thank you
I was about to do something quite similar. I know that these bearings are made from cheap Chineseium and are designed to fail. (We may all thank General Motors for starting the planned obsolescence thing in 1965!)
I was going to make a similar modification to the bearings proper by installing a zerk fitting in the housing and drilling a hole into the bearing housing that would match. Then the bearings would be serviced directly. However, that would require doing it twice to each spindle. The risk of popping out the seal would be considerable and annoying. This method does require a significantly larger amount of grease but, once filled, it would not require too much to replace any lost in usage.
The alternative would be to just bite the bullet and replace the bearings every few years. This appears to be a very good alternative and money saver. The prerequisite is that one should take the chance to replace the bearings with higher quality units from Timken, SKF, or similar brands while making this modification.
Thank you for a very well done and valuable video!
Thank you
perfect :)
nice vid. well done
Thanks!
Thanks! PS... new spindles are sent dry without grease... each spindle took about 100 pumps!
Thank you.