I want to try fishing with a pole spear, but I'm too cheap to buy all your CNC machines... P.S. Are you sure that those barbless prongs can hold a wiggling game?
a bit to much glue for me but i suppose it will work for a while but it will break after hitting the rocks over and over again whats more concerning was the rubber... do not add hard object what so ever to the rubber like you did (the balls) just make a tripple knot with the rope instead. it will wear the rubber and if you accidental shoot yourself by slipping or the rubber breaks you will have a very bad day. and zipties is a big nono, you tie it! its a disaster ready to happen.
raymond bailey aluminium (it's weight and density) gives the spear momentum and more kinetic emergy( in simple words) Empty pipe gives neutral byouancy Stiffness of the pipe also counts.Thats why wood is not used in contemporary, factory made polesperas. Also cheap wood can bend or even crack in the water, proper wood is more expensive than alu. Of course you can use anything for your convinience in DIY spear. For ages people were using wooden sticks and it works for sure;) forgive me my English;) and good luck
@@lelolek I think he means the aluminium metal broomsticks that are hollow and usually white on most modern brooms, for example: Oates brooms , Sabco brooms and Mr Clean brooms. From your friendly neighbourhood broom enthusiast.
Kerro kuinka liima&epoksi kestää käyttöä? Itse olisin jättänyt piikit maalaamatta ettei vaan maalinpaloja löydy fileistä. Minne päin ajattelit harppuna reissut kohdistaa?
Joo mietinki tuota maaliasiaa, mutta vaimo ne syö joten... mökki on päijänteen rannalla, niin siellä ajattelin kokeilla. Täytyy myös katella täältä tuusulan lähimaastoista kirkasta vettä. Kiitos kun katsoit.
i guess it's better quality then chinesse shit from amazon BUT how many people has CNC machines in their houses??? AND you call it DIY??? come on.... try to do it only with rawplugs and hand tools:)) Like me:))))) I'll tell you more, some native people in polynesia are still making spearguns with hammer and knife only. THIS IS DIY! beat that;)))) Anyway: very nice made spear, cheers
Kala saa olla kyl jonki kokone että osumisessa olisi ees jotai mahdollisuutta, en tiiä löytyykö suomen pikkulammista tarpeeks suuria ahvenia, mene ja tiiä.
Mösjöö Bassonlisääjä . Ei mitään kokemusta. Sukeltaessa pääsee kyllä tosi lähelle kaloja. Kunhan nyt vaan pääsis ja ehtis kokeilemaan. Kiitos kun katsoit.
6 ปีที่แล้ว
Kyllähän tuolla osuu haukeen ja lahnaan helposti. Kätevämpi tuo on kuin perus atrain. Kutuaikaan toimii hyvin, kun kahlaa rantavedessä haukien perässä.
Nice!! But I don't have all those expensive machines. 😂😂
Lol "for this build you'll need your own machine shop"
I want to try fishing with a pole spear, but I'm too cheap to buy all your CNC machines...
P.S. Are you sure that those barbless prongs can hold a wiggling game?
I'm too cheap to buy CNC machines too. Thays why I dont have one. And no they cant. So I had to make barbs.
Ok looks good lazy brute😅
My like, haces envío de ese arpón?
Hi @Lazy watchsmith, I really enjoyed your video. What diameter is the aluminum tube?
Cant remember. I need to measure it for you.
16mm
@@Lazywatchsmith Thank you so much for taking the time to measure the diameter of the tube. You're a true legend, happy spearing!
What material of pive did you make?
Aluminium
@@Lazywatchsmith thank for response
what pipe diameter and bolt size did you use?
Cant remember anymore. Maybe the pipe was 12mm.
This is all you need oh and a machine shop😆😆
Happy spearing, looks great!
Thanks E.
Well done!
a bit to much glue for me but i suppose it will work for a while but it will break after hitting the rocks over and over again
whats more concerning was the rubber... do not add hard object what so ever to the rubber like you did (the balls) just make a tripple knot with the rope instead. it will wear the rubber and if you accidental shoot yourself by slipping or the rubber breaks you will have a very bad day.
and zipties is a big nono, you tie it! its a disaster ready to happen.
May i order one
How many meters of aluminum pipe
1,8m
great..now I gotta buy a lathe...
You can make it with a file too. Thanks for watching.
Great video
The style he's speaking english is what we call "ralli englanti"
Hyvää rallia sulle. (Kummelivitsi)
@@Lazywatchsmith kun stefa laittaa niin se on jämpti
@@redirok193 😂
If you made one of a broom handle it would also float,Good work,Stay Safe.
Good point. Thanks for watching.
raymond bailey aluminium (it's weight and density) gives the spear momentum and more kinetic emergy( in simple words) Empty pipe gives neutral byouancy Stiffness of the pipe also counts.Thats why wood is not used in contemporary, factory made polesperas. Also cheap wood can bend or even crack in the water, proper wood is more expensive than alu. Of course you can use anything for your convinience in DIY spear. For ages people were using wooden sticks and it works for sure;) forgive me my English;) and good luck
@@lelolek I think he means the aluminium metal broomsticks that are hollow and usually white on most modern brooms, for example: Oates brooms , Sabco brooms and Mr Clean brooms.
From your friendly neighbourhood broom enthusiast.
Tuliko kalaa tällä? Tekisi itsekin mieli tehdä ja lähteä uiskentelemaan ahventen perään.
Loistava video!
Joo on sillä pari haukea tullut. Kiitos kun katsoit.
All rrrrrrright❤
Kerro kuinka liima&epoksi kestää käyttöä?
Itse olisin jättänyt piikit maalaamatta ettei vaan maalinpaloja löydy fileistä.
Minne päin ajattelit harppuna reissut kohdistaa?
Joo mietinki tuota maaliasiaa, mutta vaimo ne syö joten... mökki on päijänteen rannalla, niin siellä ajattelin kokeilla. Täytyy myös katella täältä tuusulan lähimaastoista kirkasta vettä. Kiitos kun katsoit.
Hyvin tehty video, editointi onnistunut hyvin. Eikun lisää vaan
Long sleeves and a lathe is not a great combo lol
I thought it was easy until I saw this...need some more machinery is an understatement
Nice bro
i guess it's better quality then chinesse shit from amazon BUT how many people has CNC machines in their houses??? AND you call it DIY??? come on.... try to do it only with rawplugs and hand tools:)) Like me:))))) I'll tell you more, some native people in polynesia are still making spearguns with hammer and knife only. THIS IS DIY! beat that;)))) Anyway: very nice made spear, cheers
Hienoa! Tuo on kyllä hyvä!
Kiitos Tuomas. Ja oli kyllä helppo. Toi kuminauha oli vaikee löytää. Ostin urheilukaupasta setin missä oli useta ja tuo oli löysin nauha.
Kala saa olla kyl jonki kokone että osumisessa olisi ees jotai mahdollisuutta, en tiiä löytyykö suomen pikkulammista tarpeeks suuria ahvenia, mene ja tiiä.
Mösjöö Bassonlisääjä . Ei mitään kokemusta. Sukeltaessa pääsee kyllä tosi lähelle kaloja. Kunhan nyt vaan pääsis ja ehtis kokeilemaan. Kiitos kun katsoit.
Kyllähän tuolla osuu haukeen ja lahnaan helposti. Kätevämpi tuo on kuin perus atrain. Kutuaikaan toimii hyvin, kun kahlaa rantavedessä haukien perässä.
Hello Im from indonesia 🇮🇩🇮🇩🇮🇩
Hello.
Now all you need is to be able to hit a fish ;)
😎👍🇹🇹💯💯💯💯 help full in 2021
Hi can I order to you 😊
Sorry no.
goud
Nah.. Buy one is cheaper & easier. 😂
But not as fun.
👼
Good work, bad music
Naah i like the music
Hiiiiiiiiiiiii
Hhhjhjhhh good work
Thanks!
Hieno
Kiitos!
Wala kaigo