Thank you for video. It is great. I have a question. Can I use an old compactlogix 1769-L35E to set up Ethernet IP with Fanuc 30iB controller. Thank you.
Yes, the model of the PLC should not be a problem. You may want to download the FANUC Robot AOP. It makes the module configuration on the PLC easier for the newer robot controllers. Good luck!
I'm not sure. You'd have to verify that with FANUC based on the specific model and version of the robot controller. I think all the new models support Gigabit communications. The older ones are probably 10/100Mbps. Having integrated vision may provide other speeds.
I'm not sure. As long as you have Ethernet IP communication on the MLX1400 you should be able to configure it. It'll be more difficult to determine the MSG settings and Bit: addresses, but there is probably documentation available from FANUC. Good luck! Let me know how it worked out!
@@distorsioname I do not have any OMRON equipment available. I'm sure if you reach out to FANUC or OMRON they will have some support materials available.
Thank you. That cleared up all of my questions between robot and PLC and where the I/O is connected. Big help!
I want to use Fanuc robot as a scanner with a remote point I/O AB, its the same configuration for instances?
Where do you get all the FANUC_LR_Mate tags? Trying to connect a Click PLC. TY
Thank you for video. It is great. I have a question. Can I use an old compactlogix 1769-L35E to set up Ethernet IP with Fanuc 30iB controller. Thank you.
Yes, the model of the PLC should not be a problem. You may want to download the FANUC Robot AOP. It makes the module configuration on the PLC easier for the newer robot controllers. Good luck!
IS Logical Number is used in TP programming
One question, what capacity do the ethernet ports of the FANUC robots have?
I'm not sure. You'd have to verify that with FANUC based on the specific model and version of the robot controller. I think all the new models support Gigabit communications. The older ones are probably 10/100Mbps. Having integrated vision may provide other speeds.
how do you know the assembly instance?
There is a y problema if I want to use a Micrologixs 1400 and the RSLogixs 500?
I'm not sure. As long as you have Ethernet IP communication on the MLX1400 you should be able to configure it. It'll be more difficult to determine the MSG settings and Bit: addresses, but there is probably documentation available from FANUC. Good luck! Let me know how it worked out!
Hi, I'm having problems setting plc in theft could help me
How can configuration and programming ?
It's a shame Fanuc doesn't put out any content like this or put documentation on their site or CRC portal.
Agreed. They do offer a class now that covers integration of A-B controllers with FANUC robots. Check their training website.
@@PSDettmerMATC can you teach how to connect with a omron PLC?? and how much for that
@@distorsioname I do not have any OMRON equipment available. I'm sure if you reach out to FANUC or OMRON they will have some support materials available.
hi, how to setup DI/DO and cclink for fobot. My company use robot fanuc and PLC mitsubishi and use modul cc-link QJ61bt11N . Thank you
I know that Rack # 92 is the communication reference for CC-Link. Best to contact FANUC for support on a detailed setup.
Buenas podrias compartir el archivo EDS del controlador r30ia
how to do palletization
How can I connect between ROBOT and PLC Siemens with PROFIBUS or PROFINET ?
Anybus X
Can you show config FANUC with SIEMENS PLC S7-300/400 and S7-1200
Cool stuff
Why the robot automatic cycle off and any possible solution