Used this video to install a WH20X10094 and worked like a charm! The hardest part was getting the zip tie cut after getting the belt back on. Took me about 20 minutes.
Hello. I've put a new motor and lid switch into my washer and it still doesn't spin. However, when testing, I did not have the water hoses connected. Does the unit need water to initiate the spin cycle?
Is it possible to puchase just the inverter? Mine has several burnt spots on it but the motor still appears to work when power is applied to it. Thanks.
I have a slightly older GE washer with 2 speed motor. There are no slots to bring motor out the front. Huge pain, everything has to be loosened and drop transmission down. Bad design for sure.
Hello friend, I would like your help, I replaced the motor of my GE washing machine but the previous damaged motor was from a GE washing machine mod GHWN4250D1WW with a WH20X10093 motor, but I am replacing it with an identical motor but it is a WH20X10094, the only difference and the problem It is the red connector, the WH20X10093 motor has a 4-wire red connector and the new motor WH20X10094 in that red connector only has three cables and of different colors, how could I make that connection? thanks in advance.
Used this video to install a WH20X10094 and worked like a charm! The hardest part was getting the zip tie cut after getting the belt back on. Took me about 20 minutes.
Tried replacing, didn't happen because one electrical prong on the new component has 5 prongs vs. 4 prongs on the older one.
Hello. I've put a new motor and lid switch into my washer and it still doesn't spin. However, when testing, I did not have the water hoses connected. Does the unit need water to initiate the spin cycle?
Yes how you know is moter not work
Is it possible to puchase just the inverter? Mine has several burnt spots on it but the motor still appears to work when power is applied to it. Thanks.
Why is my new belt keeps falling off in first seconds of machine starts working?
I have a slightly older GE washer with 2 speed motor. There are no slots to bring motor out the front. Huge pain, everything has to be loosened and drop transmission down. Bad design for sure.
Hello friend, I would like your help, I replaced the motor of my GE washing machine but the previous damaged motor was from a GE washing machine mod GHWN4250D1WW with a WH20X10093 motor, but I am replacing it with an identical motor but it is a WH20X10094, the only difference and the problem It is the red connector, the WH20X10093 motor has a 4-wire red connector and the new motor WH20X10094 in that red connector only has three cables and of different colors, how could I make that connection? thanks in advance.