Thanks for the nice video . Removing the backcover was harder than I expected but doable with a little patience. I just found the part of pulling the test point a bit confusing. You don't need to actually pull it, but you need to ground it by connecting it to the device body (like the metallic part above the test point) while you connect the USB; and you don't need to push the power button nor your tablet need to be off. Another thing that might be helpful: Since I was using Android SDK Platform Tools, fastboot was not recognizing my device so I had to go to fastboot mod using the adb command "adb reboot-bootloader" and then use the "fastboot oem unlock ".
Works perfectly. Very accurate tutorial. For boot bootloader and enter unlock code, open platform tools and hit adb reboot bootloader. Now fastboot oem unlock and code.
hi. I opened my T5 and right after the opening the screen stood black after turning the tablet on. I did not notice any big problems while opening the screen. While putting the screen back some picture was shown but picture and touch is irrational. Now TWRP acts on its own and touch is very difficult. I believe I have to open the tablet again and check the cable connections or can this be of some other reason. Maybe while connecting earth and test point at the wrong time?
I tried to reattach the cable on the screen side but broke the connector. A very thin white bar locking the cable snapped and I cannot get any picture any more :( So my T5 is probably just trash now or do you have any ideas?
Please can you help I found way to test point my honor 4x So just after with that potatonv when I stared it I just get that message The delay to waiting is over? Help pliz
My device dosen't turn on. I can only go into recovery mode, and fastboot. I stuck in 9:05 - i can't turn on the tablet, so i can't switch on "the develpoer options". Is any onther way to unlock the bootloader?
@@RandomRepairzThe potatonv application didn't work for me, I don't know if I did something wrong, I tried other applications to find out the boot code of my device but it only gave me the imai and I entered it and that's why I got an error but I thought it was the boot code start
Removing the display worked absolutely fine...no broken glass...no ripped cables...everything looks fine...BUT now my display stays black...well, not really black, it lightens up a little bit, when I press the power-button, but thats all. A reboot does not help either... Seems I broke it somehow 😞
I don't know if you fixed it but I had the same issue. The ribbon cable was just slightly loose for me. I just removed it from the screen and re-seated it. Worked for me.
@@brandonattor Guess that was actually the problem, i tried doing what you said and accidentally bent the ribbon cable, it does not even light up at all now LOL
@Random Repairs thanks for this. I'm struggling to get it to detect when jumping the pins and switching on. I'm using Windows 11, do you know if this method/driver set will work with Windows 11?
i've managed to get it to do it, but when i try booting into the bootloader using volume up, down and power on, i get an INSTALLING UPDATE display, and its sitting at 5% - any ideas?
@@RandomRepairz Thank you, I’ve already succeeded, this is legit! Tho I don’t really think this is good for newbies, I almost broke the screen when removing it, and it takes a bit of playing around with drivers and all that stuff, but this is the best way to do it! Thanks man!👍
If you take a VERY close look at the schematics and take PRECISE measurements, you could use a small drill to make a hole exactly above the contact and use a wire to do the grounding from there. Afterwards use some glue to fix the hole. You have to be somewhat insane to do it that way, though.
you have to use this method to find your device BL code then you can flash custom ROM. Although there is not much custom ROM available for this device. Still, I have uploaded a video about custom Rom for this device, Check that video too.
Hello, My screen is now broken because it is very fragile, god bye my good old T5. It's not your fault I know ;-) , but if the other persons tris to do the same, you must be VERY careful. If you are not sure, don't try.
Thanks for the nice video . Removing the backcover was harder than I expected but doable with a little patience.
I just found the part of pulling the test point a bit confusing. You don't need to actually pull it, but you need to ground it by connecting it to the device body (like the metallic part above the test point) while you connect the USB; and you don't need to push the power button nor your tablet need to be off.
Another thing that might be helpful: Since I was using Android SDK Platform Tools, fastboot was not recognizing my device so I had to go to fastboot mod using the adb command "adb reboot-bootloader" and then use the "fastboot oem unlock ".
Works perfectly. Very accurate tutorial. For boot bootloader and enter unlock code, open platform tools and hit adb reboot bootloader. Now fastboot oem unlock and code.
Worked for me! Thanks Nishan for the great tutorial. 😃
Thank you so much! It was easy, except for the back cover, but me, a 13y old, did it! Next step: Installing TWRP!!!
Thank you, your video helped me unlock my tablet :), also I wasn't sure if using a paper clip would work but it did, took some trying but I got there.
THANKS REMOVING THESCREEN WAS A HASTLE BUT IT WORKED
working 100% love from PH
It worked! thanks very much! but a little confusing steps, and for the test point only worked for me a cable, but i have bootloader unlocked thanks
nice it's work and I flash Pixel experience rom in twrp
worked for me..thank you!!
hi. I opened my T5 and right after the opening the screen stood black after turning the tablet on. I did not notice any big problems while opening the screen. While putting the screen back some picture was shown but picture and touch is irrational. Now TWRP acts on its own and touch is very difficult. I believe I have to open the tablet again and check the cable connections or can this be of some other reason. Maybe while connecting earth and test point at the wrong time?
I broke the display of mine device while disassembling. Maybe the touch gone bad if not the connection issue.
I tried to reattach the cable on the screen side but broke the connector. A very thin white bar locking the cable snapped and I cannot get any picture any more :(
So my T5 is probably just trash now or do you have any ideas?
Thanks, Man! Great guide!
brother where is the test point on the t3?
man nice tutorial but what you use to open the tablet?
Guitar pick
I have problem when I hold in test point and press power boten the device is open not open in test point mode my models is W09
Maybe test points are not touching properly
@@RandomRepairz I wall try anyway
Is it possible to do this for Huawei MatePad 11 and is there a way without unlocking the device with the Snapdragon 865 processors
Nope.
it don't work for me. Impossible to do the test point... :/
PotatoNV don't see "Target device" :'(
An idea ?
will it work withHUAWEI FDR-A01W MEDIAPAD T2 10.0 PRO?
Nope
@@RandomRepairz Thanks for your answer. Sorry for the late answer Looking alternatives to see how to make it to another os for that old tablet
Is it the same procedure for matepad 11?
Nope
Please can you help
I found way to test point my honor 4x
So just after with that potatonv when I stared it I just get that message
The delay to waiting is over?
Help pliz
Look on Google, you will be able to find the test points. But i am not sure this device unlockable or not.
Yes bro I already unlock it and installed twrp but there thé recovery mode can’t available just logo honor so long
@@salimouguirassy208 maybe try to boot directly to twrp, press and hold power and volume up button
@@RandomRepairz yes i did it yet but no reaction but I think I lost the original recovery
Then just restore the phone to stock rom. Maybe you have used wrong twrp.
When i press down volem he open bootloader and i teep start FBLOCK is locked!
.
.
.
.
That means your device is locked
My device dosen't turn on. I can only go into recovery mode, and fastboot. I stuck in 9:05 - i can't turn on the tablet, so i can't switch on "the develpoer options". Is any onther way to unlock the bootloader?
try to restore your phone to stock. then try again with password you got from the tool.
Press the button you say, connect the cable to the PC and play, press the power button and my tablet turned on and nothing happened
You have to short the pin on the motherboard. Did you do that?
@@RandomRepairzThe potatonv application didn't work for me, I don't know if I did something wrong, I tried other applications to find out the boot code of my device but it only gave me the imai and I entered it and that's why I got an error but I thought it was the boot code start
Hi, I can`t find the developer options, in the system options, i'm stuck there
Tap 5 times continually on build number
Removing the display worked absolutely fine...no broken glass...no ripped cables...everything looks fine...BUT
now my display stays black...well, not really black, it lightens up a little bit, when I press the power-button, but thats all.
A reboot does not help either...
Seems I broke it somehow 😞
Maybe bricked. Try huwaei pc suit to restore your device. Or try to boot erecovery.
what you use to open the tablet?
same
I don't know if you fixed it but I had the same issue. The ribbon cable was just slightly loose for me. I just removed it from the screen and re-seated it. Worked for me.
@@brandonattor Guess that was actually the problem, i tried doing what you said and accidentally bent the ribbon cable, it does not even light up at all now LOL
Is there way to do it without prying it open?
Nope
I use an android mediapad m5 lite 10 does it work
Nope, It's only for T5
Is it work on Huawei Nova 3i
Kirin 710
Not for kirin 710. I think there are rom's available for kirin 710.
is removing the screen necessary?
You can’t unlock bootloader without removing the screen.
@@RandomRepairz why?
Do it works on 4G mediapad t5?
Yeah
Does it work on matepad t8?
sorry, this will not work. maybe there is something available for t8 on the internet.
DOES IT WORKS ON MEDIAPAD T5 LTE?
yeah
Do you have 2 do this step to use custom rom
Yeah, otherwise there is no way.
@@RandomRepairz ok I am thinking off trying it quick question I start with bootloader first then twrp then installing the custom rom last?
Yeah.
Test POint driver link does not work...any alternatives
Driver link is updated, check now.
@Random Repairs thanks for this. I'm struggling to get it to detect when jumping the pins and switching on. I'm using Windows 11, do you know if this method/driver set will work with Windows 11?
i've managed to get it to do it, but when i try booting into the bootloader using volume up, down and power on, i get an INSTALLING UPDATE display, and its sitting at 5% - any ideas?
never mind, though it, thanks for the video!
@@xrissio i think you are in os restoration mode.
I will try it now，hope i dont break anything
Wish you good luck 👍
@@RandomRepairz Thank you, I’ve already succeeded, this is legit! Tho I don’t really think this is good for newbies, I almost broke the screen when removing it, and it takes a bit of playing around with drivers and all that stuff, but this is the best way to do it! Thanks man!👍
@@RandomRepairz Açınca bir daha kapanıyo mu?
Brother please help me how to do without opening the tablet case
It's not possible for free, but you can take it to good technician, who has right software to unlock the bootloader without disassembling it.
If you take a VERY close look at the schematics and take PRECISE measurements, you could use a small drill to make a hole exactly above the contact and use a wire to do the grounding from there. Afterwards use some glue to fix the hole. You have to be somewhat insane to do it that way, though.
The file rar PotatoNV needs password ? please what is the password ?
There is no password on the file. Also potatoNV isn't an rar file. It's a zip file.
如果没有BL码，可以用这种方法刷第三方固件么？
@@RandomRepairz
@@RandomRepairz
you have to use this method to find your device BL code then you can flash custom ROM. Although there is not much custom ROM available for this device. Still, I have uploaded a video about custom Rom for this device, Check that video too.
@@RandomRepairz Thank you, but our equipment is different. I didn't find the broken contact. I'll study it again
why did you open the tablet?
I have showed in the video.
i have a mediapad t3 this is work on mediapad t3
Sorry, it will not work on t3.
Hello,
My screen is now broken because it is very fragile, god bye my good old T5.
It's not your fault I know ;-) , but if the other persons tris to do the same, you must be VERY careful. If you are not sure, don't try.
I broke mine too. Although it’s in perfectly working condition.
Can you give me oem unlock code
It's different for every device.
@@RandomRepairz I want your Huawei medaipad t5 Because my device is new and I don't want to open the box because I'm afraid it will break
@@RandomRepairz bro can you give me or no?
@@RandomRepairz hello
My unlock code will not work on your device. Every device has unique unlock code