You can try to contact the seller, and ask him if they can arrange to ship it to you. this is the link shopee.ph/product/84684936/11592751136?smtt=0.62597765-1663431844.9
@@hijomoto interesting. It's strange that the ecu doesn't detect the disappearance of the O2 sensor. I went the more expensive route and got the powertronic fuelx pro. It does the trick and fuel consumption is at 28kmpl
Maybe because its still send signal because of the jumper but im not sure. 28km/l is a good number if you already bypass O2 sensor. Mine is only 19km/l
@@hijomoto right that makes sense. Also 19kmpl makes sense bc when you delete the O2, it's running in open loop mode (i think when throttle is open more than 60%, runs in closed loop below that). My ktm ran like shit before -stalled during cold starts, and under hard braking, with very jerky throttle response at low rpms. Did a fair amount of debugging and research to finally get the fuelx. Rides like a different machine now! Just think about it if you're open to spending some $, their tech support has been really good as well
Eto yung Oxygen sensor eliminator link. shopee.ph/product/84684936/11592751136?smtt=0.62597765-1663431844.9 Eto naman yung end cap shopee.ph/product/306167191/17938225043?smtt=0.62597765-1663431926.9
First☺☺magkakabit din ako nare tol. Hirap nga ng starting eh sadyang talaga. Salamat sa tip niyo ni alex. Bangis mo Hijo
Thank you tol, malaking tulong si John Alexander, daming tip. Hehe. Ayos to.
Good job po❤
How much resistance does the connector have to simulate the sensor being there? Please help me, the sensor is very expensive.
@@kennyrosales857 Not sure Bro. Sorry not able to help you.
Ayoss. Malaking pag babago. Gaganda pa yan john hehehe.
Thanks Kuya Jo, under observation pa din kung walang side effect. Hehe🙂
Awesome sir. May I know why this mod is needed. I am also planning to do a full system exhaust.
Simple mods to eliminate the cold start issue.👍
@@hijomoto thanks a lot for the reply
You're welcome👍 Ride Safe
Mga simple mods to improve our KTM 390 Adv bikes :)
Thank you sa mga tips Bro.
It is very cool mod. It is ashamed that the seller is stop selling this.
May I ask if you know who can I buy this from?
Much appreciate
Sorry Bro, this is the only seller i know.
shp.ee/5xxu8ni
sir, pa share ng link nung green connector na kinabit mo, thanks
Eto yung link bro. shopee.ph/product/84684936/11592751136?smtt=0.62597765-1662789647.9
hello sir newbie here, Ano po effect nito sa motor if ma eliminate ? ndi po ba maaffect ung performance like power or fuel efficiency ?
Nabawasan yung stalling saka cold start. Kaso lumakas sa gas.
Sir ano effect sa mc nyo other than cold start issue? Thanks.
Yung stalling issue, isa din sa mga na solved ng O2 sensor eliminator.
How do i order this to ship to the US
You can try to contact the seller, and ask him if they can arrange to ship it to you. this is the link
shopee.ph/product/84684936/11592751136?smtt=0.62597765-1663431844.9
Did you get any check engine lights after this delete?
No. I haven't experience any errors or warning. I just notice that the fuel consumption goes high a bit.
@@hijomoto interesting. It's strange that the ecu doesn't detect the disappearance of the O2 sensor. I went the more expensive route and got the powertronic fuelx pro. It does the trick and fuel consumption is at 28kmpl
Maybe because its still send signal because of the jumper but im not sure. 28km/l is a good number if you already bypass O2 sensor. Mine is only 19km/l
@@hijomoto right that makes sense. Also 19kmpl makes sense bc when you delete the O2, it's running in open loop mode (i think when throttle is open more than 60%, runs in closed loop below that). My ktm ran like shit before -stalled during cold starts, and under hard braking, with very jerky throttle response at low rpms. Did a fair amount of debugging and research to finally get the fuelx. Rides like a different machine now! Just think about it if you're open to spending some $, their tech support has been really good as well
@@siddarthjay3787 You're right Bro.👍
Will this help with the annoying stalling isssue ya think?
I think yes but your gas consumption will increase. If gas is no issue for you, you can try this one.
@@hijomoto id do anything for this not to stall. Gas mileage is secondary for sure
@@hijomoto also wondering if i will get a service light because of this
In my experience no warning at all.
Good eve sir plss send link naman yung eliminator ng shoopee at yungend plug
Tenchhuuu sir...
Ktm 390 adventure 2020..
BAGUIO
Eto yung Oxygen sensor eliminator link. shopee.ph/product/84684936/11592751136?smtt=0.62597765-1663431844.9
Eto naman yung end cap
shopee.ph/product/306167191/17938225043?smtt=0.62597765-1663431926.9
pwede kaya yan sa rusi classic 250 fi sir?
Not sure po kung same sila ng connector
Ano po tawag jan boss
Oxygen sensor eliminator sir.
out of stockk na sa shopee ::(
Try mo kontakin yung seller boss kung magkakaron pa. Medyo matagal na rin e.