Are there grippier drift tire options in 1/24 like the old school hard rubbers for 1/10, or is all 1/24 drifting relegated to rear motor, 60 to 70% rear weight bias, ultra-low-grip setups?
Hey guys Me and a few guys are looking to get into the 1/24 drifters and we are purchasing the xrx ARTR just wondering what are some of the must haves to make it killer like chassis and big offset wheels and weights?
Thanks for watching. I see you've watched the xrx one year review video as well. The parts I mention in that video should be a good starting point to get the xrx dialed in.
I’m building a da3 chassis right now; it’s my first 1/24 drift build; what kind of wheels do you use on these things. The fronts on the s13 look like Aoshima longchamps I have lying around for model kits
Awesome. That's a great chassis to get started with 🤘 the wheels they run are the mini-z awd type wheels. The rwd type have a different hub and do not bolt up. I'm running the kyosho te37 from route66 on the front and back. The offset and if they are wide or thin will depend on the setup your running ect. Some of the Chinese wheels are 20mm and 22mm. I prefer the 20mm as they are more scale looking. For tires i would use dsracing. Check out rcsupremacy.com they have a great selection of wheels and tires.
Your welcome. I'm glad to see more of us 10th scale guys getting into the 24th scale chassis. The potential is definitely there in the little chassis and electronics now to get some good tandems and consistency
Thank you 🤘. The body is a 1/24 fugimi 180sx with the eternity hobby shop bnsports widebody kit. I belive this one is 110mm as well. You should be good.
Thanks bud 🤘 I'm using a 2s 200mah - 450mah depending on which car body I'm running. 300mah seems to be a good all around size and good driving times around 45mins.
I use a brand named Bias, with the 3 different plugs to give me power options for multiple esc plugs and power for the lights. I belive their on Amazon And ebay.
For the esc and motor? Running the xrx sensorless brushless esc and 3500kv motor. I did Increase the pinion size to a 19 tooth to get a little more wheel spin at top end. Seems to be a really good final drive.
1st scale drifting video that I watched till the end!!! Best soundtrack award. Keep it going
Thank you so much. Glad you enjoyed it 🤘
Very nice track I was digging the video too
Thank you 🤘
Absolute banger!!!!!! TDG!
Thanks dude! 🤘
We want more videos 😁🤪🔥❤️🚘🚖💨💨
Thank you! 🤘 I'll have some more content coming out soon.
Just beatiful 💪😎
Thank you
oh im hooked lol im saving up right now hahah i got to have this lol im hype
Sweet I can't wait till there is a decent drift track near me..the scale look is killah!
Thanks dude 🤘
Soo satisfying
Glad you enjoyed. Thank you 🤘
And I just subscribe 🤟😎🤟love the vids fellas 🔥
That's awesome 🤘 Thank you
Nice track
Thanks 🤘
Really nice! u awesome bro
Thank you 🤘
Such a cool video
Thank you
Cool man
Thank you 🤘
I have the same Track. Nice Video👍
Thanks 🤘 that's a fun track to run in either direction.
What track is this? Do you have a link?
Yea check out rcsupremacy.com they have a good selection of these printed tracks.
@@driftinginscale1837 sold out
They will be back in stock early next week. The tracks are a hot item at the moment.
Great 👍🤩👍
Thank you 🤘
Are there grippier drift tire options in 1/24 like the old school hard rubbers for 1/10, or is all 1/24 drifting relegated to rear motor, 60 to 70% rear weight bias, ultra-low-grip setups?
Top !!
Thank you
Great video
, where did you get light poles for the track, I need some, thank you
I believe they are large scale model train light poles. I'll have to ask my buddy where he got them.
Hey guys Me and a few guys are looking to get into the 1/24 drifters and we are purchasing the xrx ARTR just wondering what are some of the must haves to make it killer like chassis and big offset wheels and weights?
Thanks for watching. I see you've watched the xrx one year review video as well. The parts I mention in that video should be a good starting point to get the xrx dialed in.
I’m building a da3 chassis right now; it’s my first 1/24 drift build; what kind of wheels do you use on these things. The fronts on the s13 look like Aoshima longchamps I have lying around for model kits
Awesome. That's a great chassis to get started with 🤘 the wheels they run are the mini-z awd type wheels. The rwd type have a different hub and do not bolt up. I'm running the kyosho te37 from route66 on the front and back. The offset and if they are wide or thin will depend on the setup your running ect. Some of the Chinese wheels are 20mm and 22mm. I prefer the 20mm as they are more scale looking. For tires i would use dsracing. Check out rcsupremacy.com they have a great selection of wheels and tires.
@@driftinginscale1837 thanks dude! This video was what convinced me to switch from 1/10 to 1/24 haha
Your welcome. I'm glad to see more of us 10th scale guys getting into the 24th scale chassis. The potential is definitely there in the little chassis and electronics now to get some good tandems and consistency
This is amazing ❤
Is this played back in slow motion?
Awesome tandems! What body is the 180sx? 1/24 model? I want one! I just got a rn80 hilux 110mm body, hopefully it’s not too long next to other minis.
Thank you 🤘. The body is a 1/24 fugimi 180sx with the eternity hobby shop bnsports widebody kit. I belive this one is 110mm as well. You should be good.
So bad ass where are you guys located
Were located in south florida.
We need vol 2
Hello, very Nice 😉
what frame do you drift with?
thank you and good slide
The pink car is a xrx dpa chassis, and the other two cars are driftart chassis. 🤘
Is the 4 door skyline body kit Aoshima?
Sweet ass track!!! Also what battery are you using for xrx dpa??
Thanks bud 🤘 I'm using a 2s 200mah - 450mah depending on which car body I'm running. 300mah seems to be a good all around size and good driving times around 45mins.
Sweet! Do you have brand names or Amazon links to any of them?
I use a brand named Bias, with the 3 different plugs to give me power options for multiple esc plugs and power for the lights. I belive their on Amazon And ebay.
Bro que gyro utilizas?
What combo u use sir?
For the esc and motor? Running the xrx sensorless brushless esc and 3500kv motor. I did Increase the pinion size to a 19 tooth to get a little more wheel spin at top end. Seems to be a really good final drive.
This is at mi friend house !
Sound please ?
There should be sound and a music track in this video. It may be blocked depending on your location.