Hello, it is enough if you ask the question 1x and not 4x in my videos ;-) If you build it properly you will not need lead. But it was very tight under the hood with the Moki180 (255mm), I think the Moki215 (285) is a little too big, the hood is narrowing forward. There should be a measuring where the model has !!! The model has to be completely reworked, otherwise it will not withstand this engine!!! - check all ribs (hull), glue back or glue in again - Check engine frame, if necessary, rebuild - Modify and / or rebuild the landing gear shaft and place it at an angle to the front otherwise headstand is announced! See link chassis pictures - Tube could be too short (4-5cm), necessarily measure and if so buy new - Definitely remove these wing threaded bolts and replace them with bolts from the back. In addition, maybe two pins in the area. - Reinforce fuselage with 2-3 GFK mats, more because of transport, I would say that is quite thin, otherwise cracks can occur which would be annoying - SP on 195mm (easy top-heavy, but only slightly) - Air outlet note that there is enough available Interesting, especially see chassis pictures: www.warbirdforum.de/forum/thread....id=&hilight=LA7 because of the threaded bolts, see here, different model, same sch *** principle (see page 1 & 3): www.warbirdforum.de/forum/thread....htuser=0&page=1 maybe some info to find, cockpit, pilot, antenna other: www.warbirdforum.de/forum/thread....htuser=0&page=7
Hello and many thanks !!! My engine runs perfectly, I am very satisfied ;-) The 150 is a little bit weaker. There you have also 1-2" smaller propeller then.
@@vicyboy12 yes, that fits the model. Mine here was only reinforced with fiberglas mats in the fuselage and the landing gear mount was completely rebuilt. My connecting tube was also too short and needed a different one 😅🙄
What a fantastic sound and lovely scale weathering details on her, really nice plane, John
many many thanks :-)
great video, here passengers on our place! hi, Have fun watching, all the best !
Lawotschkin La-9 , Bearcat
Tolles Modell!
Vielen Dank!
Hi is this engine weight okay for this model? Or you need to add more weight on the firewall? I plan to get moki 215 for this model. Will it fit?
Hello, it is enough if you ask the question 1x and not 4x in my videos ;-) If you build it properly you will not need lead. But it was very tight under the hood with the Moki180 (255mm), I think the Moki215 (285) is a little too big, the hood is narrowing forward. There should be a measuring where the model has !!!
The model has to be completely reworked, otherwise it will not withstand this engine!!!
- check all ribs (hull), glue back or glue in again
- Check engine frame, if necessary, rebuild
- Modify and / or rebuild the landing gear shaft and place it at an angle to the front otherwise headstand is announced! See link chassis pictures
- Tube could be too short (4-5cm), necessarily measure and if so buy new
- Definitely remove these wing threaded bolts and replace them with bolts from the back. In addition, maybe two pins in the area.
- Reinforce fuselage with 2-3 GFK mats, more because of transport, I would say that is quite thin, otherwise cracks can occur which would be annoying
- SP on 195mm (easy top-heavy, but only slightly)
- Air outlet note that there is enough available
Interesting, especially see chassis pictures:
www.warbirdforum.de/forum/thread....id=&hilight=LA7
because of the threaded bolts, see here, different model, same sch *** principle (see page 1 & 3):
www.warbirdforum.de/forum/thread....htuser=0&page=1
maybe some info to find, cockpit, pilot, antenna other:
www.warbirdforum.de/forum/thread....htuser=0&page=7
great video, here passengers on our place! hi, Have fun watching, all the best !
Lawotschkin La-9 , Bearcat
Hi Marcus, May i know your how much right thrust and down downthrust used on the engine?
OMG, it's beautiful.
many thanks ;-)
great video, here passengers on our place! hi, Have fun watching, all the best !
Lawotschkin La-9 , Bearcat
👍
many thanks 😊
great video, here passengers on our place! hi, Have fun watching, all the best !
Lawotschkin La-9 , Bearcat
Markus, have you been happy with the performance of the Moki 180? Is it a big improvement over the 150? Beautiful video!
Hello and many thanks !!! My engine runs perfectly, I am very satisfied ;-)
The 150 is a little bit weaker. There you have also 1-2" smaller propeller then.
great video, here passengers on our place! hi, Have fun watching, all the best !
Lawotschkin La-9 , Bearcat
Hi, may i know what is EWD: 0,5° ?
EWD is in englisch "setting angle difference" or better "angle of incidence"
@RCPLANEVIDEOS Meaning your C.G slightly nose heavy about 0.5deg?
@@vicyboy12 EWD = EinstellWinkel-Differenz
Auf Englisch: longitudinal dihedral
Search in Google for picture 👍
@RCPLANEVIDEOS Thanks for the explanation. May I know how much your right thrust and down thrust? Did you use the manufacturer right thrust?
@@vicyboy12 yes, that fits the model. Mine here was only reinforced with fiberglas mats in the fuselage and the landing gear mount was completely rebuilt. My connecting tube was also too short and needed a different one 😅🙄
Next step is to biuild a real one. It will be just 3 times bigger :)
great video, here passengers on our place! hi, Have fun watching, all the best !
Lawotschkin La-9 , Bearcat