Before anyone wastes their time cutting the wrong size pieces; they all have to be the exact length. You need 16 stacks, each with 70 staples (a hair under 1 and 3/8ths). I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time. 👍
@@shizuxo lol it absolutely matters because the width of the staples has to fill the gaps and connect the staples. You tried coming in with all that sass "lmao" and clearly didnt think for a moment of what you were actually saying. just trying to be sassy lmao
I read most of the comments. Almost everyone wants to know what size staples to use, same question I had. (Note: a staple has a crown which is the top part, and 2 legs). Since the youtuber did not disclose measurements of his staples, I decided to use the old tried and true method of observation, and so, this is how to go about building your own cube: using the staples at hand do the first step he did: place two stacks with legs facing up, parallel to each other and separated by a distance slightly shorter than the crown. Use another stack facing down as to lock them up. Carefully stretch them out and measure what will be the width of each stack for your own project. Make sure the legs are shorter than the crown or it won't work. Mine came to 1 3/8". I used standard staples with 1/2' crown and 1/4" legs and came to a measurement of 1 3/8" for the length of each stack. Now, I don't have enough staples at hand, will have to buy some more. Once I build my cube I'll let you all know how it turned out. Have fun! 😊
@@thisindianfan9054 I just tried with same as you, wont work because 3 plates that you put down are wider than that 1 that gose on side and you cant make it longer... it only works with long staples that you can cut down if needed...
Saw the short and I'm gonna try this Update: Now trying at work gotta figure out how many staples are in a brick here Update: Just finished! It's a bit lopsided since they aren't all the perfect size but it turned out pretty good!
@@tangjaydengaming7057 (Pierced from Within) posted 2 days ago: Pierced From Within 2 days ago Standard half inch staples, length of staple stack is 1 and 3/8 inches. 16 stacks needed. He also posted this comment: Before anyone wastes their time cutting the wrong size pieces; they have to be exact. A hair under 1 and 3/8ths. I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time!
me after trying this :- my patience is leaving i got the bucket to throw this,my patience is leaving i got the bucket to throw this, ayi ayi aaa i threw it at 1kth fail not much a i do my class.lol🤣😅
Are the pieces all the same size? Because I get to 0:18 and I cannot for the life of me get that second tower piece in. It looks like that side piece is just a couple staples too long for it to fit. Help?
Had to try it. Those measurements are exacting, that's for sure! One staple too long or short and it doesn't work. But get it right, and wow, is that satisfying!
someone (Pierced from Within) posted 2 days ago: Pierced From Within 2 days ago Standard half inch staples, length of staple stack is 1 and 3/8 inches. 16 stacks needed I hope he's right. I HAVE to make this one for myself! :o)
He also posted thsi comment: Before anyone wastes their time cutting the wrong size pieces; they have to be exact. A hair under 1 and 3/8ths. I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time! I hope that helps!
No pun intended, but I was bored of my grandmother’s house after work decided to go for a walk to Staples to purchase to Staples… 😂 or maybe I’m at Office Depot, who cares same thing anyways…
Guys before wasting of time ...some body tell how it can be stable when second last staple cant stay in its place even after putting last staple because there is something called gravity unless use of glue...
I managed to do it, but my cube doesn't feel to be firm and sturdy as yours and seems like it can come undone any moment you put your hands on it. All pieces have the same length. I would highly appreciate any suggestions
(Pierced from Within) posted 2 days ago: Pierced From Within 2 days ago Standard half inch staples, length of staple stack is 1 and 3/8 inches. 16 stacks needed. He also posted this comment: Before anyone wastes their time cutting the wrong size pieces; they have to be exact. A hair under 1 and 3/8ths. I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time!
*Me watching and trying dis late-night*
*EVEN THOUGH I KNOW TOMMORROW IS MY EXAM*
you are spying me right?!
You. Are. Spying. Me. Too.
Before anyone wastes their time cutting the wrong size pieces; they all have to be the exact length. You need 16 stacks, each with 70 staples (a hair under 1 and 3/8ths). I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time. 👍
^^^ You tha man (or woman).. worked like a charm!
Umm can u please explain in an easier way. I Don't understand English too much. I didny understand the, " A hair under 1...."
@@alexdriscoll5899 awesome!! So glad to hear it helped! 🙂
@@mrweeb8533 staples need to be about 35mm in length
@@naledithema9480 oh alr
The amount of staples you’ll need in each stack is 72 for anyone wondering
No, it's 52
@@davidhradilek5988multiple different amounts will work. duh.
lol it doesnt matter as long as all stack are form same box lmao
@@shizuxothe length of the staples is directly linked to the width of the staples.
@@shizuxo lol it absolutely matters because the width of the staples has to fill the gaps and connect the staples. You tried coming in with all that sass "lmao" and clearly didnt think for a moment of what you were actually saying. just trying to be sassy lmao
The last step is equivalent to GTA helicopter mission.
Nahhh it was easy
no its not? i bet more than 50% people struggle at that last part@@Entess_Gaming
@@Dracul_X Yes it is i did it on the first try
@Hip.Hip.Hurray no no it's inspired by gta online missons 😂😂
@@SUSHMACHAUDRYnah the helicopter mission in vc was hardest others are not even close
This is still better than 5 minute craft...
Awesome 🔥
This man’s hands are more stable then my brain
"than"
A😅😅😅😅😅😅😅😅😅😅😅
😢
Staple sales after this 📈📈📈📈
Very cool, worth every second of my life
You were doing this all your life? Tf.......
I read most of the comments. Almost everyone wants to know what size staples to use, same question I had. (Note: a staple has a crown which is the top part, and 2 legs). Since the youtuber did not disclose measurements of his staples, I decided to use the old tried and true method of observation, and so, this is how to go about building your own cube: using the staples at hand do the first step he did: place two stacks with legs facing up, parallel to each other and separated by a distance slightly shorter than the crown. Use another stack facing down as to lock them up. Carefully stretch them out and measure what will be the width of each stack for your own project. Make sure the legs are shorter than the crown or it won't work. Mine came to 1 3/8". I used standard staples with 1/2' crown and 1/4" legs and came to a measurement of 1 3/8" for the length of each stack. Now, I don't have enough staples at hand, will have to buy some more. Once I build my cube I'll let you all know how it turned out. Have fun! 😊
Bro i cant make cube strongly so what can i do pls help me i am using 24-6mm size staple still it not happening
@@thisindianfan9054 I just tried with same as you, wont work because 3 plates that you put down are wider than that 1 that gose on side and you cant make it longer... it only works with long staples that you can cut down if needed...
I KNEWIT! They are definately not the same length. I just got started. Thank you.
You are so unemployed to right this whole useless thing
Smart! Im trying with my own sizes as I build the cube, so far it is working after spending 24 hours to figure out they can not be the same size 😅😅😅😅
the hardest part is to put the last stapel at the right position
😢true
Nah it was ez af........ You just need to push away the others a little bit and you are done
Before time began, there was... the cube
After the cube, there was... no time left!
Long before time had a name
time cube? isn't it time square?
We do not where it comes from. Only that it holds the power to create worlds and fill them with life.
Bayformers.
Saw the short and I'm gonna try this
Update: Now trying at work gotta figure out how many staples are in a brick here
Update: Just finished! It's a bit lopsided since they aren't all the perfect size but it turned out pretty good!
there are 16 staples bars : > ! X40 or X50 (roughly)
@@donahu85 mmm that would explain why my mine came out a bit lopsided for the length and width in certain places. Off by just a bit
Gets up and runs to office closet! 😂
EXACTLY!
RIGHT!?
Right I also Tried
I am Also Complete The Challenge
Watch
You too!!?? Lol
I stopped everything & spent over an hour trimming strips to perfection to build this.
How much were one staples
@@tangjaydengaming7057 (Pierced from Within) posted 2 days ago:
Pierced From Within
2 days ago
Standard half inch staples, length of staple stack is 1 and 3/8 inches. 16 stacks needed.
He also posted this comment: Before anyone wastes their time cutting the wrong size pieces; they have to be exact. A hair under 1 and 3/8ths. I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time!
As a classical guitarist with long ass nails, this was extremely difficult to do.
it must me hard taking a dump with nails on your ass
Fr XD
Cut your nails then
@@poland4m17s no can't do, they're too important.
me after trying this :- my patience is leaving i got the bucket to throw this,my patience is leaving i got the bucket to throw this, ayi ayi aaa i threw it at 1kth fail not much a i do my class.lol🤣😅
What's the size measurement of the staple pin?
Are the pieces all the same size? Because I get to 0:18 and I cannot for the life of me get that second tower piece in. It looks like that side piece is just a couple staples too long for it to fit. Help?
Had to try it. Those measurements are exacting, that's for sure! One staple too long or short and it doesn't work. But get it right, and wow, is that satisfying!
Took about 4mins to get it done, last step was a bit tricky!
Tried it! Last step was a tight squeeze, but when it fit perfectly into place, it was so satisfying ☺️
Did it come off as pieces or stuck tight??
@@vishwajitm4562 mine came out
@@vishwajitm4562 mine also came out
@@vishwajitm4562 w
@@vishwajitm4562 g
how long does each piece have to be ?
When youre one pin block short....
Tried a few times, but all unstable. Which stapler bullet that you use to get sturdy cube like that?
Gh
unstaple*
How many did you make to make it look so easy to make one? It took me half an hour to assemble one of these cubes
You might have loose staples. Even i have loose staples, but did it under 5 minutes (first time)
@@nevil999 same here in 2nd try
good steady hands i've been trying myself it just keeps sliping around and falling apart they made it look so easy i won't give up
Had to use gum.. otherwise it was impossible
Mine kept breaking in half
Drawing pin on top of the dark square
Boris Johnson quits
What is the staple size for a tight cube? 24/6 23/8 or something else?
someone (Pierced from Within) posted 2 days ago:
Pierced From Within
2 days ago
Standard half inch staples, length of staple stack is 1 and 3/8 inches. 16 stacks needed
I hope he's right. I HAVE to make this one for myself! :o)
He also posted thsi comment: Before anyone wastes their time cutting the wrong size pieces; they have to be exact. A hair under 1 and 3/8ths. I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time! I hope that helps!
For those saying that the cube is unstable...before making the cube try to press the sides of the pins (but dont break it) and then try
So clever!
16 parts, 52 pieces each 💪✌️
Thank you 🎉
Before trying, use super glue to make the staple more stable.
I am Also Complete The Challenge
Watch
No pun intended, but I was bored of my grandmother’s house after work decided to go for a walk to Staples to purchase to Staples… 😂 or maybe I’m at Office Depot, who cares same thing anyways…
Какие скобы нужны? Какой длинны?
As a person that usually dont have alot of staples , its a lose lose for me
An 18 piece is so close to bingnpossible it’s maddening
Im proud of myself bcoz I can do it with 9mm, 4.8mm Stapler. Santisfy with the result. Thankyou for sharing :)
You could make good money selling those cubes lol
Iwas at the last step when my plate or chotti or ponytail ruined it
Ну, пара штук у меня на столе уже стоит 😅
did it , but now im stuck with a stapler with no bullets and a cube made out of staples .
Me : For the last step i need some one else.* Calling my brother*😅
The moment I completed it
And hardly put it aside for a second it's ruined already 😐
Staple sales after this 📈📈📈
The last step was extreme but it was totally worth it....Actually it takes 16 staples
The last step was truly very hard but finally made it after 7 - 8 tries 😊
it takes almost 2 hours💀
I almost gave up
Yes...
It's really very hard bro
Really 7 8 😂 I made it in 2nd try the only thing is you have to do with patience
I give up, the staples broke off
Doing this with small staples at a last stage was tough though😅😅
How many staple pin is required for this
16 brother
U can use tape
To keep it together
I always struggle with the last part
Guys before wasting of time ...some body tell how it can be stable when second last staple cant stay in its place even after putting last staple because there is something called gravity unless use of glue...
In the last step, one weak part broke and here goes my hardwork. Gosh was so excited for it. Where can I find new stapler pins at this hour
Would be nice to have an exact measurement of the staples
Standard half inch staples, length of staple stack is 1 and 3/8 inches. 16 stacks needed
@@theprimagen Thank you, as you are proof not all heroes wear capes!
You need No.10 staples
De echo si las tienen nomás que no medi mis grapas y me da pereza desarmar mi cubo xd
@@nodwolf no problem! I am glad to help let me know how it goes
My cube is flimsy even after doing all the steps, still it was fun
Lunch-break inventions 😋
I literally did but at the when i try to pick up and it got break...and it took me 30 minutes😢💔
Try again don't give up
Same, its not that tight
This cube looks like it is glued together.
It would get built but would break if you lift it😢
Me donning keeps falling!, then wait I’m out of staple!😂
Worth every second of my life 🎉
I tried to make but could not make it even after 20 tries I also used help of my grandfather but still didn't make it😢😢😢😢😢
I manage to close all the holes to make sure it stronger, except the last staple
When you run out of stapler pins-
جالب بود
Complete
Cooll!!
That's cool
I managed to do it, but my cube doesn't feel to be firm and sturdy as yours and seems like it can come undone any moment you put your hands on it. All pieces have the same length.
I would highly appreciate any suggestions
Zajebiste 😊
I did it but the staples are loose..but not getting the way he is showing in the video..is there a gimmick
Longer stacks
Nice 👍👍👍
I just made this at work. Stopped everything I was doing. Because this cube was worth it.
each piece should be about 6 staples less than 1.5 inches.....or 1 5/32 of an inch
From cool to f it real quick😂😂
How long are the staple measurements
I did it after trying more than 10 times...but now the problem is my father wants staples and I don't want to give it to them😅😅😅😅😅😂😂😂😂
I am Also Complete The Challenge
Watch
Them? How many Fathers do you have?
This is not in your recommendations,you searched it on purpose.
Mom, please buy me staples I've got tons of school projects.
My staples are too long.
What # staples is this?#10 ones don't seem to work!
Here comes the legend
How is it so stable? Mine fell apart as soon as I started!
It's unstable I til it all comes together. They need to press on each other to hold in place.
Nah man, through the whole process. It’s unstable even when I finish it. I try to pick it up and it still falls apart.
Dexterous!
Made it. But doesn't become strong. Stays loose. Why?
Looks like the Spiderman cube
This is so much more harder than it looks
I completed it, but it fell apart when I lifted it, it fell apart😢😢😢
It's very challenging. You should try this.😄😄
The cube of Kubika was like this in the film
Amazing now I have to make one of those haha
(Pierced from Within) posted 2 days ago:
Pierced From Within
2 days ago
Standard half inch staples, length of staple stack is 1 and 3/8 inches. 16 stacks needed.
He also posted this comment: Before anyone wastes their time cutting the wrong size pieces; they have to be exact. A hair under 1 and 3/8ths. I use a razor blade to cut them. Be warned, because of the fragility of the staple stack, it can be a challenge so take your time!
me watching this in 4k
Nice
me tryna remove 1 or 2 staples at a time to get the sizes even lol.
I am have tried it, so I GOT IT!!!😊❤
It took me 3 tries, while doing the last step it was hard....
But i got it!❤
this cured my depression
Disappointed with last move, tried more than 20+ times.
yooo. WE ACTUALLY MADE IT!!!! ❤🔥
See,Try,Exited,Breaks,Rage,Quit,Repeat
Really nice!
ahh classic, im one piece short
Easy peasy.. but there's a hole in your cube. 16 staple bars are not enough, you need 18 bars for a perfect cube. Mission impossible tho'.
Awesome trick 👏, But newbie be careful last step can ruin everything