Light upgrades for S-Cross part 2
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Hello Friends, this is in continuation to the previous video where I had explained how you to select the appropriate headlamps for your vehicle which would be a best in class and would not void your cars warranty. In this one I have unboxed high and low beam headlamps and how to fix them in your car. Also tried to show the difference between before and after.
Hope this find you information and you like it. Please don’t forget to hit on like and subscribe to encourage me posting more such videos.
I am also owing scross Zeta, your video was very helpful, thanks, excellent narration 👍
बेहतरीन जानकारी,आपका धन्यवाद हम भी बदलेंगे अपनी गाड़ी के।🙏
Bhai Bahut Badhiya Lagata hi Thanx
Hello how's the performance of leds now after 2 years??
Thank you for your information.. .. Could you please shows the connection as well regarding the wiring😊
Bhaiya ji 🙏 agr aaj bhi s cross rakhe h to high beem ko adjust karwa le upar niche h
I see the low beam one fan is hanging out and not fits into the assembly. Will it attract dust and moisture inside the headlight assembly?
Hello, no fan ll hang out of the assembly. The LED comes with attached fan. If the specs are correct, your assembly ll fit appropriately.
U got low beam with 25W specs and on manual its 55W so getting low power bulb doesn't affect the throw of light? And also is 55W available for same?
Also sir, would adding another pair of LED to the low beam or the fog lights affect the battery ? Which configuration can be used for FOGLIGHT's / LOW bEAM LED's sir?
If you check your user manual, you shall find the fog lamp specification. Search Amazon with same specs but LED. You should be good to go.
@@sardalviThanks Sir
i have scross 1.6 alpha. i need to upgrade headlamps. can i use it just gor low beams. Can you mention the exact spec product i should buy to get better light while driving?
Well jut check out your owner manual and see the specifications for low beam. Only then I ll be able to suggest you the best light for your low beam.
Also, sorry for the late reply..
thanks for this awesome video. parking light v alag se lena padega kya?
parking lights ki itni zaroorat nahi hai, unhe halogen hi rehne do. Kabhi zaroorat padi to replace aasani se kara sakte ho. Waise agar lena chaho to bulb configuration check karke hi lelo, user manual main se.
@@sardalvi okk thanks. Btw I am also owning scross zeta petrol. Superb beast 🙂🙂
@@OmPrakash-nw5wx true… Superb Beast.. 🤟🏼
Can we upgrade alpha veriant headlights without break the warranty?
Default headlights are not sufficient on heighway
Hello Vaibhav,
First of all, we will have to understand the headlight unit in Alpha, which is the same as other models except the DRL and LED bulb. And that is the reason why I decided to replace the existing bulb in Zeta projector headlamp unit. As long as the bulb configuration for your projector stays default, though it be led or halogen, your warranty will not laps. So to answer your question, unless you really need a DRL, don’t upgrade to Alpha headlamps, upgrading the bulbs will sort the purpose. If you still want to upgrade, please do it from NEXA showroom so that they will give you warranty. Also, I have requested Alpha model LED bulb configuration from one of my contact, one I receive it I should be able to advise you the exact bulbs.
Hope this helps. Ty…
@@sardalvi hey thanks for these details.
Hi, Thanks for making this video which is helpfull for scross buyers.
I also got the Osram H11 LED, since I found the default one not good enough for highway drivers, that too without any street lights.
I am wondering if the H7 night breaker are worth enough for upgradation?
The H11 LED for sure increase the ilumination to great extent, but I am skeptical about H7 Helogen. How much does it add compared to the default one? worth spending or can be a passe?
Hello Tej, the H7 night breaker pretty much does the same job as default ones. Yes, bit of an improvement though but not a substantial difference. Would say, not that worth spending.
Thanks for liking this video.
Hi, Thanks for this simple video. Watched part one and this also. I too have a Zeta having H7 for high beam and H11 for low beam. I want to change the low beam to this Osram. Is this a just plug and play and no need for separate canbus. Also you were mentioning the type as H7 whereas the low beam type as per manual is H11. Pls confirm whether we need a service person or we can ourself replace as shown in your video. Thanks in advance
Hello Ananda, thank you for your comments. Yes, it’s as simple as it’s been shown in the video. You won’t need service person at all. Just twist and the bulb is out in case of Low beam.
In case if high beam, after you remove the cover, there is a clip that needs to be pressed, just like a safety pin which our mom use to clip their pallu.. hahah
Happy DIY…
@ Ananda Kumar : Yes your were right, I didn’t show the connection as it was just plug and play. The impt thing is to get the bulb of right config. And that is ll you need. Also, I ll post a quick video on through of these lights in night time. It ll help you better in deciding to go for bulb upgrades or now. Thank you.
@@sardalvi But for H7 head beam you need to have the dust cover otherwise dust will enter into the reflector... If you use a dust cover how will the LED fan work.. there should be an air outlet .. I Wanted to change my H7 halogens to LEDs but due this reason I didn't replace. my halogens
Hello Sir, I have few questions pertaining to light Update for S Cross Zeta.
1. If we upgrade low beam to LED than will it be voilation of warranty?
2. If we upgrade high beam with LED than beside spreading light what else are it's ramifications? Does the through of LED is less than halogen light?
Thank you for answering in advance.
I have subscribed your channel because I like your content 🙏
Hello there… Good morning .. below are my comments to your quest :
1. As long as you are just playing around with the bulb replacement within the default configuration, warranty is not hampered.
The moment you alter the wiring by adding an relay for high power led or halogen, there are high chances of warranty violation. But there is a catch here, all these type of wiring is done externally, if you are able to technically explain the same to showroom in case Of any issues, warranty remains intact. I would suggest to just replace the bulb in defined config as I did. Thanks.
2. Besides spreading, the LED lights are harmful for human eyes. The cars in opposite lane ll surely be affected. I’m case Id you are driving on the road without a divider and what if the opposite driver unable to see anything cause of lights ? He might come and dash you, instead.
This is just a theory for possibility, hence I do not recommend that. And Yes, the through of LED is always more than Halogen.
Hope, I have answered the question to best of my knowledge and helped you understand the facts. Let me know in case if you need any more information.
Thanks for subscribing. Happy to help..!!
@@sardalvi the
@@brave5076 We’re u trying to ask something. Couldn’t quiet get the ask.
Hey hi ...thanks for the video..just one question..is upgrading to HID advisable for my projector lamp for Zeta version? Where can you be contacted.. thank you in advance
भाई क्या s cross गाड़ी मे yello light हटा के led hed light lagva sakte hai मेरी से cross gadi है पर hedlight led nahi hai pls bhai bataio
this is fit for s cross 2018 model
Sir, am not sure about that but would suggest you refer your manual only if you have projector headlamps.
Hii is this d5s bulb ?
No. The setup is LED. You can go for HID but there is bit more wiring involved. Plz go as per specifications only.
Have you updated the parking light also to LED.
Nope, but I intend to do so. I ll surely put up a video on that soon. 🙂
Sir
High beam me aapne helogen lagai to kya usme led lgana sahi rahega kya ya helogen
High beam unit kaunsa hai… If it’s a projector then Led will give you the best output (focused rahegi light through) Agar reflector hai to helogen hi sahi rahega. In case of Led In reflector, light through bahut spread hoga.
Hope this helps and you ll be able to select the best option for your vehicle.
Mujhe bhi apna zeta me upgrade karna hai light. Jab apka experiment sahi rahega tabhi upgrade karunga, ho sake toh highway par spread dikhaeye
Shashi ji yeh experiment nahi hai. I wanted to upgrade the bulbs. Through is awesome, I will shortly share the effect video. Thanks.
@@sardalvi eagerly waiting. Aise hi best accesories videos dalte rahiye scross community ke liye 👏.
@@Shashi025 sure sir… filhal to Car damping wala video lined up hai. By next week upload ho jayega. Thanks for encouraging me… 👍🏼
Hello sir,
Mene ek shop pr baat ki ,mujhe s cross zeta variants me low beam ke liye h11 osram led lights chahiye to unne kha ki , aap keval low beam me led lgaoge and high beam me company fitted halogen hi rkhoge to car ka look bigad jayega, dekhne pr accha nhi lagega,
Aapka kya suggestion he sir?
Aapne high beam ke liye halogen light hi suggest ki thi
So what I do
Please help
Sirg, aisa bahut kum time hota hai ki aap dono bhi beam lagake gadi ka look dekhange ya koi bahar se dekhega. Koi looks pe farak nahi padta. Led lagaoge high beam main to reflector se spread hogi aur samne wali gadi ke driver ke aakhope jayegi.. isliye recommended nahi hai..
baki aap pe hai.. look wise kuch nahi hota..
Hello,
Meri car s cross zeta variant he ,
Meri car me halogen projector headlight lgi he, kya me isme high beam and low beam dono me led light lga skta hu , agar lga skta hu to aapne aapki s cross me high beam ki liye halogen and low beam ki liye led, esa kyu kiya , dono me led kyu nhi lagai?
Hello, SCross Zeta ki Low beam is projector unit. So LED works best. And High beam is Reflector unit so LED will not work best. LED Light spread hogi. That’s why maine High beam main Helogen hi lagaye hai OSRAM ke.
Hi
Osram low beam led light to 25 watts me he, pr maruti ke user manual me 55 watts recommended he, to kya ye install krna sahi rahega
Please reply
Good question sir. Yes, np to install these… as long as you don’t cross recommended watts, you don’t need any external relay to be installed. It’s would be just plug and play. Thank you.
High beam me bhi led lgana thik rhega?
@@piyushjhanjhri2904 higher beam main lagao to samnewale driver ko taklif hogi. As per your bulb configuration app laga sakte ho.
Agar rely dalwate ho to high power ka bhi laga sakte ho.