Mercedes Benz MB SLK R170 W170 1998 Removal headlight and turn signal tutorial V0016
ฝัง
- เผยแพร่เมื่อ 28 พ.ย. 2024
- #jarospeed_ #mercedesslk #slkr170 #removaltutorial #slkheadlight #headlightremoval #merecedes #slk #mercedesbenz #r170 #removalslk #removaltutorial #ausbau #w170 #doityourself #diy #repair #repairing
jaro speed
MB SLK R170 1998
Thanks for showing ALL the screws and tabs. Much appreciated!
thx for the feedback,
i give my best thx:)
Very helpful - thank you! Just a suggestion - a narrative description, to reinforce and further explain the procedure, might be better than a musical track.
the next vid will be much better,
thx for watching - jaro :)
Anything is better than the musical track!!!
Super Anleitung, hat damit easy geklappt, den Scheinwerfer zu wechseln.
Der neue Scheinwerfer mit Angel Eyes hat leider keinen Anschluss mehr für die Leuchtweitenregulierung. Lass ich die Schläuche dann einfach unangesteckt liegen?
This was helpful but one step that you missed is to use a long screwdriver in the small hole on top of each headlight to depress the tab that releases each side marker lamp.
thats right :)
Good tutorial, ...I would have liked to see a close-up of the electrical connector.
Merci a toi j'ai fait la même pour la Chrysler Crossfire bises Fabien
Thanks for making the video. Very Helpful. Cheers.
thx for watching too
jaro
Ok. .....very nice job.....thanks for sharing.
thanks for watching too
bye
:)
This video does not adequately explain how the really funky highly engineered fastener that shows up at the bottom of the light assy that slides into the car body that is nearly impossible to reinstall! The fastener can be seen at 3:29 min. into this video. The bolt that is removed after sliding the signal light out is where the fastener is. Do yourself a favour, take a hack saw and cut the hexhead thing off the funky fastener before it gets installed. I mean cut it right off...not needed as the bolt holds the light assy in. Oh and I dont know why everyone says to remove the grill...we did not see ANY advantage to removing the grill...it's simply not required. I love that German Engineering...whoa what a lovely fastener to put back in like it came out of the factory!
thx for watching Tom :)
Hi Tom I believe that hex nut is to adjust the beam height. I've had trouble with that today. That's the purpose of it, but highly annoying
@@GaryTillman Yes...highly annoying!!
These headlights are from glass or plastic?
hi its long time ago, but I think it was plastic, thx for watching - jaro
Do I have to remove the grille to remove the headlight?
yes U have to :)
JARO SPEED Malarkey...grill does not have to ne removed...not even a little bit.
Sehr schlechte Beschreibung..Die Blinker werden nicht durch wackeln ausgebaut sondern oben ist ein Loch wo man mit dem Schraubendreher rein muss zum entriegeln ...
Hi, bei 1:24 zeige ich nochmal den Hebel den man nach hinten drücken muss,
damit der Blinker rauskommt, aber wenn man alleine filmt und 2 Hände zum Ausbau braucht gehts leider nicht besser - sorry. best Regards - jaro