Heat up the iron and then work a cheap paracetamol tablet over the surface (holding it between tweezers). It’s amazingly effective. There’ll be other videos on TH-cam that show this paracetamol method - check ‘em out.
Would I use a same method if I have a pieces of magazine stuck on it? Looks like some dumb nut placed it back into the box that it came with after using it without cooling it down. He must had left a Aldi’s catalog in it because after some days I tried to take it out to use it I realized this. The cover of it ripped and a large portion of the catalog stuck on the iron. Like I said would I still use the same method?
Heat up the iron and then work a cheap paracetamol tablet over the surface (holding it between tweezers). It’s amazingly effective. There’ll be other videos on TH-cam that show this paracetamol method - check ‘em out.
Just apply crosin tablet on minimum heat, it works like magic 👍👌
Absolutely right ,,,,I also do same like ,,,it's very easy and quickly remove iron strain
Thanks a lot, worked for me
What? that crocin tablet which we use for for headaches?
@@professionalentertainer5338 yes..try it
@@professionalentertainer5338 yeah the same, just rub it on the press using a cloth on your hand or something Kaizoku ;)
That plate was sanded down. ❓❓❓❓❓❓❓You can see from the sandpaper lines
Should the cleaning of the iron box done when the plug is on or heat it then switch off then the cleaning?
i have same question..
Thank you!!
It worked for me!!!!❤❤❤❤
Wow that's great 👍Try doing it and it really works.
Sprinkle some salt on a wooden board and rub the hot iron box to be cleaned on it, 99% result
Never do it with steam iron because after that steam iron won't heat anymore
Nikada vise necu kupiti drugu marku pegle/! SAMO "TEFAL" NAJBOLJA.
Iron garam kr k samandri jhaag Jo pansari ki shop s easily mil jata h os SE rub kren bilkul saaf ho jaey ga
Non stick bhi utar jayega rub kerne se ?
Maine salt wala Kiya Mera press kharab ho gya rha
It's amazing 👌👍
Thanks
Sand paper gives same result...
It's work ❤
Pre heat the iron and then sprinkle some flour (aata) on it then rub with steel scrubber and see the magic 99.9% works.
Would I use a same method if I have a pieces of magazine stuck on it? Looks like some dumb nut placed it back into the box that it came with after using it without cooling it down. He must had left a Aldi’s catalog in it because after some days I tried to take it out to use it I realized this. The cover of it ripped and a large portion of the catalog stuck on the iron. Like I said would I still use the same method?
Try soaking the paper off and then doing this but don’t use toilet paper because it will get stuck in the holes
You can't fool me you just throw out the old one 🙄
dude you cant literally see the scratches and I've tested this and it works
May as well leave out the toothpaste
You saved my life THANK YOU so much ❤
It's not good look at my one 😜😊
Make it warm first?
Con ese método se le quite el teflón a la plancha 😮
I use blade to scrape it out. 1st the iton box for few seconds, unplug and scrape with blade.
This method is for cooking 😅😅😅. Too much of spices
No it's not working take some salt and heat the iron and press on salt and after 2 minute it will be work
I use a belt sander. Cleans them up quickly
Just use a magic eraser...so much easier!!
Use sand paper instead
Sister very nice kam aaya y Idea
I use sand paper and its quick fast
its gonna rust really quick tho
@@haro45aayein
Алюминиевая подошва... А никелированная?
Too much work. Heat the iron. Rub down plate with a dryer sheet until clean. Wear a glove to protect wiping hand 'cause it gets hot !!
Pehle wala shot baad mei dikha diya
"Time is money"
What a waste of time and it's not even coming off. Best go buy a new iron and use that time for some constructive work.
Pasta de dente , bicarbonato de sódio e sal !
Just take a. Panada lol. Teblet and the clothes bucram first put teblet on it then do the bucram on it like same you do👍😌😼
Just used wax candle
Please will you do this while the iron is plugged? Or unplug
Unplugged after mind heating
@@ajeetkumargpt 🤔
Just use paracetamol
Rob the paracetamol on the hot it will clean it neatly in no time that is what I use always
@@rashidadauda9262i use eno
👍🏻
What the hell were you ironing?
It can happen, I have one burnt too. Most probably synthetic clothes got burned because of temperature setting mistake.
Kush ni hota es ki sath😅😢😢
kya process karte samay bhi press on rakhna hai?
Bro hath jal jye ga
Heat and then off kar do
Doesnt work
This is to big proces Use paracitamol tablet For clean it work heat iron box put and scrab
Emery paper se saaf kar diya dikhaa diya colgate se saaf kiya
With plugged or not
Without plug, heat for few seconds then unplug and start the cleaning process
Só o que gastou nos produtos, dava pra comprar um ferro novo...!!🙈🙈
Great way
ووووو
Can we use on Ceramic coated iron?
Paracetamol is the easiest easiest way try it.
Rub the paracetamol on heated iron and clean carefully with cloth.
For non stick or stainless steel iron ?
@@promax9159 yes
Iron on ha ya offffff
🤔
Off h, but thora garam kiya h taki saaf krne me asani ho
Effective
It's not good look at my one😜🤞
😊❤
😂
germ ker Kay ragemar say foran saf ho Jai ha
Great idea 👍👍❤️🙏
Sispsjrns😂ryjf🎉jfjs😢hdphg😮jfu😊gjf❤jfj
So nice
Good job
I used everything you said but it didn’t work
😢
Use Panadol...hot iron r
Inky holes to damage ni hoty aisy??
Panadol pills also work. :) warm it up, then sand with it. Thats the best so far
With heat or non heat?
@@balakabilraj heated up.
Use P600 sand paper, fast and easy way.
One panadol extra se bi safff ho jati ha iron full grm kren or us pa kapre se rub kren 1 mint ma saff
Just use paracetamol tablet instead
Instead of duing this use candle wax
Thank you
Rub a paracetamol heated. Then it's done🤦