Have the BBSHD for 2 years, great system, zero issues. I did upgrade the controller to the Grin Phaserunner 5 months ago. Best upgrade ever. My 750W stamped motor now outputs around 4k watt!
I understand that this method only works in some frames. I had a carbon bike with the Aston Rider kit and I switched it to a bamboo bike in 10 minutes and I didn't have to cut any cables
I followed every step and.. my motor does not respond to input. The LCD which is connected to the motor turns on, but nothing happens when i peddle or press the thumb throttle. Have i just got a faulty motor or is there some trouble shooting i could try?
Sinds 2020 stuif ik rond met een bbs02 van e-bikesets punt nl.. 100% tevrede over de service en de prijzen!! In 2023 een bbshd er bij gekocht.. waarschijnlijk door een fabriekfout kapot gegaan.. maar er is me een compleet nieuwe motor opgestuurd! Vaste klant hier! (Video's zullen volgen op mijn kanaal)
the whole system is a death trap comming from motorbikes and doing mechanics everything needs re thought. the chain is too thin it will snap and grear changes on those little things held on by two screws is suicidal.
Looks too easy haha. WIll be getting a kit next week, hopefully it goes as smoothly as this. What about a gear sensor? Are these recommended? Will it improve motor lifespan?
Здравствуйте, на заднем колесе, во втулке ножной тормоз. Шатун у мотора крутится назад, а передняя звезда стационарная(крутится только вперёд) Как решить эту задачу? Спасибо...
Hello, thank you for your video. I am wondering about the adaptability of this engine with my bike. I have a distance of 78mm and not 73mm of length of tube in which to insert the bottom bracket mark. Can you tell me if I have to take a 90mm bafang motor or if the 73mm will be fine? Thanks in advance, Jean-Louis
Hello, I wanted to ask you for help. I bought the BAFANG BBS01B 36V 250W kit with Hailong 17.4Ah battery, to mount it on a SPECIALIZED STUMPJUMPER COMP HT 29 "from 2012. The problem is the size of the bottom bracket, the cylinder of the MTB is of length 73.5 mm and the internal diameter is 45.5 mm smooth, without thread. While the BAFANG one is 65 mm + 17 mm threaded, the diameter is 33.5 mm. Can you advise me how to solve without proceeding with a structural modification of the MTB. Sorry in advance for my terrible english.
I believe the non-threaded tube is not a problem. Probably too late for you, but a friend had a 3D printer and he "printed" a pair of spacers, but he only had to cover 5mm of difference.
@@tomjoad1363 ...just think of the water how many puddles can you ride thru before it dies or you forget you have it on your bike and bump up a kerb and kill it
Surrgestions bout these motors in the UK 🇬🇧 the law will be changing to nothing above 350w motors on escooters and ebikes, so don’t even consider buying a 1000w coz if a cop 👮♀️ sees it ur arrested, fined and 6 points on your license!!!
Must be an MTB frame, and/ or mounted motor UNDER the front down tube. I was lucky and had room to mount mine "inside the triangle" and have no such issues. My ride is a Street Cruiser Basman frame/ Ruff-cycles Ruffian style bike though, so much less jarring of a ride. Build link......electricbike.com/forum/forum/builds/custom-builds/82548-to-build-a-better-ruffian-i-need-your-help
Have the BBSHD for 2 years, great system, zero issues. I did upgrade the controller to the Grin Phaserunner 5 months ago. Best upgrade ever. My 750W stamped motor now outputs around 4k watt!
should i get 750w or save extra for the 1000w?
Привет даставка увас еис калесо матор
This program helps when one wants to convert a bike.
Great video.looking at purchasing and having a go at installing this on my girlfriend's bike.very informative.👍🏻
Will this fit on my Fliz bike concept bicycle?
I understand that this method only works in some frames. I had a carbon bike with the Aston Rider kit and I switched it to a bamboo bike in 10 minutes and I didn't have to cut any cables
The kit include the tools?
I followed every step and.. my motor does not respond to input. The LCD which is connected to the motor turns on, but nothing happens when i peddle or press the thumb throttle. Have i just got a faulty motor or is there some trouble shooting i could try?
Why do you have to take the pedals off and open the chain? And I didn't see you connect the chain back together
I think Bafang supplies the crank arms for your own pedals, and if you don't have a front derailleur you won't even have to break the chain!
Sinds 2020 stuif ik rond met een bbs02 van e-bikesets punt nl..
100% tevrede over de service en de prijzen!!
In 2023 een bbshd er bij gekocht.. waarschijnlijk door een fabriekfout kapot gegaan.. maar er is me een compleet nieuwe motor opgestuurd!
Vaste klant hier!
(Video's zullen volgen op mijn kanaal)
did you attach the battery holder with only one screw from the original bottle holder?
the whole system is a death trap comming from motorbikes and doing mechanics everything needs re thought. the chain is too thin it will snap and grear changes on those little things held on by two screws is suicidal.
we use an additional nutsert, so it is attached with three screws. no problem.
Smooth video thank you. What do you do with the front derailure, cable etc? Thanks.
Looks too easy haha. WIll be getting a kit next week, hopefully it goes as smoothly as this. What about a gear sensor? Are these recommended? Will it improve motor lifespan?
Can this kit be used without the digital handlebar display? The price is double if you choose one of the displays.
Здравствуйте, на заднем колесе, во втулке ножной тормоз. Шатун у мотора крутится назад, а передняя звезда стационарная(крутится только вперёд)
Как решить эту задачу? Спасибо...
Does show in the list of parts or even an option for torque arm??
So can I use any bike like a full suspension bike.
Hello, thank you for your video. I am wondering about the adaptability of this engine with my bike. I have a distance of 78mm and not 73mm of length of tube in which to insert the bottom bracket mark. Can you tell me if I have to take a 90mm bafang motor or if the 73mm will be fine? Thanks in advance, Jean-Louis
Will the Bafang kit fit on a vintage American fat tire bike or beach cruiser?
Have you come across a bottom bracket the hole a bit larger diameter ( not length) than the Bafang motor shaft
There is a special type with a bigger diameter i believe
Hello.
Thanks for the videos.
I have a PW-SE motor and how can I develop thumb throttle?
Thanks
Bonsoir combien pour le vélo
Hello, I wanted to ask you for help. I bought the BAFANG BBS01B 36V 250W kit with Hailong 17.4Ah battery, to mount it on a SPECIALIZED STUMPJUMPER COMP HT 29 "from 2012. The problem is the size of the bottom bracket, the cylinder of the MTB is of length 73.5 mm and the internal diameter is 45.5 mm smooth, without thread. While the BAFANG one is 65 mm + 17 mm threaded, the diameter is 33.5 mm. Can you advise me how to solve without proceeding with a structural modification of the MTB. Sorry in advance for my terrible english.
I am not sure but i would buy another kit. It is a bummer but you should have done good research.
I believe the non-threaded tube is not a problem. Probably too late for you, but a friend had a 3D printer and he "printed" a pair of spacers, but he only had to cover 5mm of difference.
👍👍👍👍👍😊
❤❤💐🌞☀🌟👍👍👍
Hw much?
Donde lo puedo comprar y cuánto es el costo del kit completo.
Come si sceglie la corona..44/46/48... Ho una norco range alloy 🤷♂️
Unde se poate face comanda
Is it available in Philippines?
Hi whtat is the yellow pin cable out of the motor? Shift sensor?
I wish I could have that... Big help going to my work..
What about the brakes. Don't these need an upgrading?
You should have disk brakes also the chain has to be stronger or it won't last long.
Donde puedo comprarlo
Quanto costa este motor
Disculpa cuanto vale ese kit para la vice
What about a bike with a bottom bracket box of 70mm? Still possible to mount on? Which model?
yes, wider BB is OK.
cuanto e il prezzo
My bike has a ISCG bottom bracket with this system still work?
How can i buy
I guess you left the right handle bar as is. With breaks and gear shift for back wheel. OK!
All very good but what's the price of these motor's
?????
Kit ~$800 usd.
AU$2k, fitted by RevBikes, Melbourne.
Brilliant 👌👌👌
Does the kit come with all the tools or do i need to buy them separately
NO tools. You'll need a shaft extractor and some Allen wrenches.
@@tomjoad1363 ...just think of the water how many puddles can you ride thru before it dies or you forget you have it on your bike and bump up a kerb and kill it
How much
Kit set bafang elktrik harga berapa. Pesan di mana trim
Saan kya pwdi buli yan
Where is the pedal sensor? You don't need one? I didn't see it instaled... Thanks!!
Motor cuts out when you stop pedalling
How much this Kitts.. Please tell me,,,,
Bang saya umpama beli peralatan mesin listrik itu berapa harganya...
Motor ka price fore address
how do I find it in Jakarta, Indonesia? how much? anyone give me please any idea where is the shop or link? thank you.
Ebikejakarta tokpedia
Hi Ade, did you buy one? Do you like it?
@@sunsunjohnson9084 Do you know how much it is? Is there anyone who can install it for me in Indonesia?
Hello good morning sir
I like buy it where place how much bring philippines
prise i am Indian
Surrgestions bout these motors in the UK 🇬🇧 the law will be changing to nothing above 350w motors on escooters and ebikes, so don’t even consider buying a 1000w coz if a cop 👮♀️ sees it ur arrested, fined and 6 points on your license!!!
good video, tks for sharing...
Qu El est le prix
Bd price
Dove posso trovare batteria electrica bicicletta OLIMPIA, MARATHON HC-36V10.4Ah-H-OQ-TY-101069
Costing + shiping to Europe...??
aliexpress is around 400 with everything
Prezzo x un 1000 w kit completo
Anche io lo cerco
Price
750W Conversion Kit=> 500 EUR on Ebay (without battery).
750w ka prise kitna hogabathovo
Nice 🙏🏻🙏🏻🙏🏻🙏🏻
S motor ka India ka price
No jo má člověk kupovat dvě nebo 4 na auto. Myslím že se to vyplatí předělat to kolo na elektro pohon.
Hatt euch nie jemand beigebracht wie man Kabelverlegt das des nach was ausschaut
The motor will work lose as mine did so best to fit a torque arm.
Must be an MTB frame, and/ or mounted motor UNDER the front down tube. I was lucky and had room to mount mine "inside the triangle" and have no such issues. My ride is a Street Cruiser Basman frame/ Ruff-cycles Ruffian style bike though, so much less jarring of a ride. Build link......electricbike.com/forum/forum/builds/custom-builds/82548-to-build-a-better-ruffian-i-need-your-help
Use Loctite, and It must be torqued to 40 Nm on the M33 ring, and similar on the pedal arms to bottom bracket crank.
Motor seperti ini satu ,harga brpa
Satu set ,500 wat dan harga berapa?
Sir i want mid drive motor kit, how much sir?, i am live in india, pls i want this
You can check the price and order from AliExpress!
Le prix !!!!!!
Como consigo comprar valor quanto que é
550 euros
wtf you called that pedals ??
doesn't work with Marin San Quentin Bike!☝️🧐
The Frame suxxx.
Sti2d on est là ? 🤡
Cool👷
saan po pwd mkabele ng motos n ganyan
Nice kind for a suicied, better beware none else is involved,
the only thing that will die is the motor when it goes thru a puddle of water
Never heard of this Chinese maker before.
Bafang is top!
Salm
Please please,,I need one piece,,any guys help me, please,,
Wy people make videos and don't answer the question
E
Батарею на один болтик посадил? Ты клоун!
Chainline!!! Your will lose half of your cassete!
Om9
Price
How much
How much
تبرك الله على يك