How can I tell if mine is bad? I jus brought a 2003 grand marquis which has crazy shudder around 35-45 mph and 50-60 mph. Fluid is currently at the line on top of the crosshatch area. Not black. Doesn’t smell the best though. I was thinking of fluid and filter change to resolve issue and found this might be the culprit??
Why is it so hard to find info on everything earlier than '92? I have a '91 E40D that hard shifts in 1st gear and is sluggish. No burnt smell or shaving in the pan after the fluid and filter change.
I have a question on a 1997 Grand Marquis. I got an oil change and bought a speed sensor as well, since the speedometer acts up sometimes, as well as cruise control and a late gear change from 1st to 2nd. When they took out the old speed sensor it had an orange plastic gear with a tip on it on the outside, while the one I got in autozone had a round metallic part with an o-ring. I had a refund on it but I wasn’t able to find that geared sensor. Which one is the right to have in this case? Thanks a lot!
How do you tell of the input or the output sensor is bad? I have a 2001 expedition 4x4 and the transmission isn't wanting to change gears by itself. I'm having to let off the gas and then apply the gas again once the transmission changes gears.
I'm looking the speed sensor of the Ford ranger 2000 4.0 V6 manual, I think it is in the rear dife, right? My speedometer doesn't work and I don't have codes.
At my work we have an 04 e350 van that wouldn't shift past 2nd gear. The sensor was broken and the connector wire was broken off. Exposing 2 easily seen wires. Replaced it and the connector wiring. And it runs normal now. Plus the speedometer stopped working. Don't know how it happened as the sensor is not in an area that could be caught by anything.
While the video is great. Yet you never mentioned it. I assume the sensor you're talking about is the output, the other sensor is the input. I'm looking for the location for an input speed sensor for 1998 Ford explorer.
As a female I am trying to learn how to fix my own vehicle after getting ripped off, so are you saying that my 2000 ford expedition 4.6L V8 Triton XLT has only one speed sensor? Is it called the automatic transmission output speed sensor? If so, where would it be located?
Which one is the InPut and The Output?
On the later model, are the front and rear sensors the same part number?
Hi, where can I find the input shaft speed sensor on a 2016 mustang ecoboost?
Do you know the location of the input speed sensor on a 2016 mustang eco boost ?
How can I tell if mine is bad? I jus brought a 2003 grand marquis which has crazy shudder around 35-45 mph and 50-60 mph. Fluid is currently at the line on top of the crosshatch area. Not black. Doesn’t smell the best though. I was thinking of fluid and filter change to resolve issue and found this might be the culprit??
I have only 1 code in my p0721 car is not moving/engage on any shift position. Could this code prevent it from moving ? Vw tiguan 2012 .
Why is it so hard to find info on everything earlier than '92? I have a '91 E40D that hard shifts in 1st gear and is sluggish. No burnt smell or shaving in the pan after the fluid and filter change.
I have a question on a 1997 Grand Marquis. I got an oil change and bought a speed sensor as well, since the speedometer acts up sometimes, as well as cruise control and a late gear change from 1st to 2nd. When they took out the old speed sensor it had an orange plastic gear with a tip on it on the outside, while the one I got in autozone had a round metallic part with an o-ring. I had a refund on it but I wasn’t able to find that geared sensor. Which one is the right to have in this case? Thanks a lot!
You need to put the orange one back in, that is a specific tooth count, replace housing but reverse the gear.
Is the input speed sensor located inside or outside of transmission on a 2013 Ford Econoline e350 Van?
Hello! The physical speed sensor is located outside of the transmission.
@@MonsterTransmission , thank you so much. I greatly appreciated
How do you tell of the input or the output sensor is bad? I have a 2001 expedition 4x4 and the transmission isn't wanting to change gears by itself. I'm having to let off the gas and then apply the gas again once the transmission changes gears.
It will either have no signal or codes at all
I'm looking the speed sensor of the Ford ranger 2000 4.0 V6 manual, I think it is in the rear dife, right? My speedometer doesn't work and I don't have codes.
Correct, it's in the rear diff.
where is the speed sensor located for ford 96 e150 4.9
It would be in the Tail Housing or the Rear Differential. Thank you for choosing Monster Transmissions.
How do you know when the sensors go bad?
If you can perform a Full DIAG on the vehicle and pull the codes would be the best way to see if you have faulty Sensors/Solenoids.
At my work we have an 04 e350 van that wouldn't shift past 2nd gear. The sensor was broken and the connector wire was broken off. Exposing 2 easily seen wires. Replaced it and the connector wiring. And it runs normal now. Plus the speedometer stopped working. Don't know how it happened as the sensor is not in an area that could be caught by anything.
While the video is great. Yet you never mentioned it. I assume the sensor you're talking about is the output, the other sensor is the input.
I'm looking for the location for an input speed sensor for 1998 Ford explorer.
Speed sensor would be in the Tail Housing or the Rear Differential
As a female I am trying to learn how to fix my own vehicle after getting ripped off, so are you saying that my 2000 ford expedition 4.6L V8 Triton XLT has only one speed sensor?
Is it called the automatic transmission output speed sensor?
If so, where would it be located?
Where is located a 1990 Ford Econoline 250 5.8 Speed Sensor
Either on tail or in rear diff