Some additional info the beast plus has to have its own battery as stated ,for the E.S.C plug this into channel 5 ail servo port, all other ports 1 to 4 are for servos-start motor as normal throttle up then down to calibrate . I had tried standard rx but could only get beast to work on SRXL .
Jim, Nowadays SRXL2 can just be connected on Microbeast Plus White side port (DI2). So, if I keep a 700 nitro machine, how can I connect the RPM sensor and my AR8020T SRXL2 receiver at the same time?
when I power up A will flash but I don't get a status light at all, if I just power it up normally it will light up red, but lights c and I light up and after 3 seconds or so the front row of light flash left to right
☠BLACK BARON☠ "Made in Germany" ... can I buy a "Software Upgrade" for my FC6250HX flight controller as AR7200BX and AR7210BX seem to be discontinued in hardware and software engineering?
Some additional info the beast plus has to have its own battery as stated ,for the E.S.C plug this into channel 5 ail servo port, all other ports 1 to 4 are for servos-start motor as normal throttle up then down to calibrate . I had tried standard rx but could only get beast to work on SRXL .
Perfect video! Thanks so much Jim - saved me all kinds of agony.
Jim,
Nowadays SRXL2 can just be connected on Microbeast Plus White side port (DI2).
So, if I keep a 700 nitro machine, how can I connect the RPM sensor and my AR8020T SRXL2 receiver at the same time?
A very clear video....thanks, but could you advise if this is the same for the AR6210? it dosn't have a SRXL port. many thanks
This video help me out so much greatly appreciated
Hi. There, my beastx plus jump from L to H I and blinking orange back and forth and I can not get the heli off the ground and keep tipping. Any help 🙏
Do you plug your Servos for pitch and Aileron and Rudder to the Receiver or Microbeast ?
Did you ever figure this out? I had the same question
hello,
are u using a spektrum radio setup for this SRXL ?
What if you have a v3 microbeast?
when I power up A will flash but I don't get a status light at all, if I just power it up normally it will light up red, but lights c and I light up and after 3 seconds or so the front row of light flash left to right
☠BLACK BARON☠ "Made in Germany" ... can I buy a "Software Upgrade" for my FC6250HX flight controller as AR7200BX and AR7210BX seem to be discontinued in hardware and software engineering?
Would this work with DX6?
yes
thank you
I must have the only faulty one ever made, pissed right off, been trying now for 2 days, had enough
2020 saved my ass (L)