👉 th-cam.com/video/62FFzr1SzqU/w-d-xo.html 👈 Check out my walkthrough video of this project for a more in depth look at the design and inspiration of this build.
So believe or not, after many years of watching "how to" videos on TH-cam, this will be the first time i've felt compelled to make any kind of comment. I saw your video and was very impressed with your creation. It was exactly what I needed for my wife and I to use for our projects. I purchased your plans for this table and was able to follow and assemble very easily using the videos you put out. It took me a couple of weekends and i'm very happy with the end result. I did follow your advice regarding the placement of the hinges for the wheels. Great alternative and much less work. The only thing that you might want to edit on your lumber cutout list is in reference to part B of the plywood. You listed part "B" x 4 when in reality one needs six of these. Two more than the listed four to glue onto part "C". Other than that, my completed table lies proudly on the wall, tucked away. Thanks!
Hi Carl. Wow, thanks so much for sharing your thoughts and providing the feedback! Really glad you enjoyed the videos and my DIY plans for this. Your story is an encouragement for me to keep making more things like this. 🤗 Thank you for mentioning the error with part B. A couple other people have brought that to my attention and I've corrected it since. I'd be thrilled to see photos of your build and feature it in my gallery, if you'd like to email some to me. Thanks again and have a great day!
In addition to that, I suggest one other thing. A layout of where to cut up the 4x8 sheet of plywood into its separate pieces. I'd like to just know where to drop the lines for the cuts ASAP instead of trying to figure the puzzle. 😁 Oh, and in the material list. 2x4s (x8) but what length? I'm assuming 8 eight footers? Loved the videos! Bought the plans, now finally getting to the build! Thanks!!
@@wxviewer I realize this comment is 2 months old but for the sake of others that might have this question whilst learning, the 2x4 pieces listed are studs. Studs are exactly 92 5/8 inches in length. Best of luck!
Thank you Konstantinos for the detailed feedback! Really appreciate you taking the time to drop a comment. Super helpful. Really glad you liked the no music approach. It was a last-minute decision which I'm now really glad I did. Have a great day!
The folding legs with removable wheels is genius. I have a plywood cover for the box of my truck with folding legs to use as a table when off the truck. Your folding leg design with removable wheels would be perfect to make the table even more portable. Cheers!
I would simplify the casters/legs by extending the length of the table a few inches so that the casters can be attached to the legs directly and not interfere with each other when he legs are folded.
@@nauy The point is that with the casters attached in a fixed position, the workbench wouldn't be that stable anymore. Note that in the video, he only uses the casters to move the workbench to the desired position, then folds them away, so the workbench is standing directly on the legs, not on the casters anymore (which is MUCH more stable than it standing on the - locked - casters!).
As a millworker, really appreciate the clean as you go/vac use. Little clean up as you work means a safer site/less mess over all. The table is a good idea too
Cool build. I just bought a couple of those plastic folding tables to save myself some time and effort. I use it outside at night for astronomy too and I don't have to worry about damp wood warping.
yup i can relate to Carl Calderon below ... just finishing up the project myself ... used 4X4 throughout and a few different parts : foot press wheels, interlocking plates for the center member, 2X 3/4" MDF surface with shellac finish AND the piece de resistance -- T Track cross hatch ... just a tad over $150 BUT well worth it ... i'll finish the edging with some maple eventually .. thanks very much for this inspirational video
2 years later this is more like a $250-$300 project. I just ordered everything from HD and it was about $250 and I had a couple of the screws already. Great project, just what I was looking for.
One word - “Ingenious”. You proved in this video that creativity has no limits! And, how to make the best with what you have! Thanks for sharing your idea and making the best video!
Just built the 5ft workbench with flip out wheels. I had to use a chain and bolt to the cross support because the Eye Hooks were not strong enough to hold the flipped wheels. Nice table, but I’m going to sell it for about what I got into it. I might do it again, but go to 6 ft and skip the flipped wheels. Bigger table, actually better for stability and simpler. Thanks for your video.
Neat build I also enjoy building work tables I tend to make them weight 700-1000 lbs though couldn’t imagine hanging them on the wall though. For everyone reading this in the year 2134 get outside and build something anything there’s so much pleasure from building.
I like build videos that DON'T require Master Level skills and really expensive tools. This video meets those requirements I am quite sure I could build this with the skills and tools I have with just a couple new ones like the pocket hole jigs. Keep up the good work and I would like to see more ideas to try.
Love love love this! Cleanest workspace ever! Clean as you go is always my motto. Love that there’s not a lot of talk and just getting to the project. Very cool design. Cute kid too. We’re subscribing!
This is just fun to watch!!! I have NO desire to do any of this-I’m an old crippled lady. But I sure enjoy watching you make stuff and you make me laugh! I appreciate no words, the fast motion, and the sounds are quite satisfying, not obnoxiously loud, thank you! And I want a JD tractor toy for my grandsons!!!
I would highly recommend the dust collection attachment for the pocket hole jig, works incredibly well and it seems you are very focused on eliminating dust right as it is made, so I would consider this a worthwhile investment
I purchased your plans and built it. I love it. I made some slight changes like 1/4 inch x inch lag bolts for mounting the caster wheels. This is the perfect addition when needing a spacious workbench that stores so I can park my truck in the garage. Thanks.
Exactly my thought - cool project, but it seems a rare scenario that someone simultaneously does not have floor room for a workbench, but has plenty of wall space.
I just built this awesome folding shop table using the plans from Etsy and even used the links embedded in the PDF to find most of the materials which was a huge time saver (for those who don't yet know, the box stores apps and websites will tell you the exact aisle and bay of an in-store item as long as you have the correct store selected). This went together so easily and perfectly and is a beautiful space saving design in my long narrow shop. The only thing I kinda goofed on was the location of the bolt holes. Those need to be precise if you want a table that doesn't wobble. This is no fault of the design/plans but even though I measured and marked the drill locations with calipers, the 1/2" bit made the boards wander a bit on the drill press so I wish I had built a jig to secure them before drilling. I fixed this issue by measuring up from the bottom surface of the table top to the end of the shortest leg and then marking that location on all the remaining legs and cutting on mitre saw. That will hopefully save others some headaches if they run into the same issue. A better idea would be to assemble the legs and clamp them in place on the frame before rounding the ends and then drill through all 3 pieces of 2x4 for the bolts. The only other tip I would add for this great design is to make sure you sift through all the garbage lumber at the box stores and get the really straight 2x4's that have zero twist or crowning. Again, this will ensure you have a level table top with no wobble once you're done. Great design, thanks for posting. Well worth the meager sum paid for the plans. Oh, and the plans have an update on the hinge locations which I used and they turned out perfect! No need to cut a rabbit in the legs. Thanks for posting this. I will use this for the rest of my life!
Great build! I really like the idea of being able to collapse the whole thing and store it on the wall. I need to build a shelving unit first, but I will keep this bench in mind for the future. I think my favorite part was the sock dance...just wish it would have gone on longer! Great video.
The first half of the video I'm like "man why is he doing all this work on the floor?" And then I realized, at some point he thought that too so he decided he needed to build a work bench.
Only thing I would have done differently would have been to bring the 2x4's all the way to one edge of the table and make a quick release attachment for a vise... and maybe one that will work with a grinder too... and maybe shield that end with some sheet stainless steel. lol
Imagine how much shit you could get done if you really could work at that speed! After he drilled all those holes using that jig, whew, I had to sit down and take a break!! This is an awesome invention. I really should build a couple for my garage.
I love the way you keep your garage so clean and organized. It take ms less than a minute to vacuum after a few cuts. Hopefully I can pick up this amazing habit. Awesome job.
wow, what a great design. A few years ago I built a custom workbench to fit the corner of my garage. It's heavy duty as hell, mobil (uses casters and built-in car jacks on each side, kind of a crazy design) and super useful....when I NEED TO USE IT. That's the problem...I don't use it that much and it takes up a decent amount of space I COULD be using for my lawnmower, kids bikes, etc. I love the idea of building a "fold-away" workbench like yours. I would lose some strength, but the additional space when I not doing a project would be really nice. Anyway, great build, sir !!
Wow that’s awsome. I have a garage and half I usually move my wife’s car out of the garage so I can do woodworking always wanted a work bench just don’t have the room this gives me a great idea thanks
Last night, I spoke to my wife about a table that could be stored flat against the wall. Today, this video is suggested... One might think TH-cam is listening.
Dear Sir Very solid and strong workbench. As your workbench fits to the wall, you are also very much fit physically. I loved the way you jumped on the workbench.
I finally built it!!! I purchased your plans, but they are not clear for a beginner. I watched your TH-cam video and paused and figured things out that way. You should have them include the link to your video with your plans. Just a suggestion. I did do the hinges the way you suggested instead of how you did it and works great , you just have to mount hinge a little lower on the leg. Awesome build, and thank you for taking the time to share and show. Can't wait to try another one of your builds now that I have a work bench.
Awesome! Thank you for getting the plans and building! 🤗 Sorry for the level of difficulty. It's my first DIY woodworking plan, which I'm sure I could have done a better job designing. Will get it next time!
Huge kudo points for showing the finished product at the beginning of the video to let the viewer know what end product is intended to be, along with some of the key features, before you show how you did it. There are far too many videos out there showing a craftsman creating a masterpiece, but you may never know until 2/3 of the way through the video where you say, “Oh, so that’s what he’s building!”
Good work. Only 2 latches at upper side won't stop the bench falling off if being pulled at lower side. Suggest to have lower side locks to protect kids.
Awesome build ! I searched up wheels on work table and came across your video and subscribed. I’m a lady looking for information like 👍 this. I’m happy I came across yours !. Great inspiration 🌝
Starting early is the best way of getting ahead to build wealth, investing remains a priority. The stock market has plenty of opportunities to earn a decent payouts, with the right skills and proper understanding of how the market works.
@@mukailasuleman5717 So stop wasting your time with fake profile, like i have once lost my hard earned money on fake sites but thanks to manager Jay Pelle FX
I was sold on the rolling Superman at the beginning of the video... oh sure, unfolding it and pulling it off the wall was cool, but something that complex, and you can have fun with it? I want one...
@@VisualSpicer the first time you took it off the wall I thought you had some clever joint holding the table to the wall, (the way it looked being unfolded from the wall just before you rolled it away; simple still works best... Very nice build.
Thanks for the great plans. I really enjoyed this build. The only difference was that I added two stretchers to the bottom so I could place a plywood shelf there while working on my projects. Also, I payed around $200 for all the supplies at Home Depot. Thanks again!
Great idea. Only piece of caution I have is to make sure there is something t secure the bottom of the table when stored away, just in case it gets bumped
I added wheels to my workbench as you did for your's although it's damn heavy so may need to rig up some kind of pulley system to flip them under on my own!! brilliant idea though - kudos! just so happened that when we shortened the legs to make my workbench what I considered the right height, it turned out to be exactly the same height as me saw bench, once the wheels flipped out - quite by accident!!
finally!!! TH-cam actually recommending good content! I started watching the preview but had to click the link..... I say who cares what the haters say! any carpenter would be happy with your work! if you lived in Australia I would of probably payed for one to be built 😁👌
👉 th-cam.com/video/62FFzr1SzqU/w-d-xo.html 👈 Check out my walkthrough video of this project for a more in depth look at the design and inspiration of this build.
What about measurements?.
@@kathyboings1227 p
No jointing / planing?
INSUPORTÁVEL!!!! MERECE UM Deslike por muito comercial do TH-cam....5,6 vezes no mesmo vídeo de 10 minutos,Seara, sadia, amaciante, Gillette.
Super impressed with this video. Just subscribed. I’m sharing this video as well. 👍
So believe or not, after many years of watching "how to" videos on TH-cam, this will be the first time i've felt compelled to make any kind of comment. I saw your video and was very impressed with your creation. It was exactly what I needed for my wife and I to use for our projects. I purchased your plans for this table and was able to follow and assemble very easily using the videos you put out. It took me a couple of weekends and i'm very happy with the end result. I did follow your advice regarding the placement of the hinges for the wheels. Great alternative and much less work. The only thing that you might want to edit on your lumber cutout list is in reference to part B of the plywood. You listed part "B" x 4 when in reality one needs six of these. Two more than the listed four to glue onto part "C". Other than that, my completed table lies proudly on the wall, tucked away. Thanks!
Hi Carl. Wow, thanks so much for sharing your thoughts and providing the feedback! Really glad you enjoyed the videos and my DIY plans for this. Your story is an encouragement for me to keep making more things like this. 🤗 Thank you for mentioning the error with part B. A couple other people have brought that to my attention and I've corrected it since. I'd be thrilled to see photos of your build and feature it in my gallery, if you'd like to email some to me. Thanks again and have a great day!
This is probably the best most relevant and video specific, comment I've ever read.
Well done.
In addition to that, I suggest one other thing. A layout of where to cut up the 4x8 sheet of plywood into its separate pieces.
I'd like to just know where to drop the lines for the cuts ASAP instead of trying to figure the puzzle. 😁
Oh, and in the material list. 2x4s (x8) but what length? I'm assuming 8 eight footers?
Loved the videos! Bought the plans, now finally getting to the build! Thanks!!
@@wxviewer I realize this comment is 2 months old but for the sake of others that might have this question whilst learning, the 2x4 pieces listed are studs. Studs are exactly 92 5/8 inches in length. Best of luck!
@@PatrickScott9192 thanks!
I really admire that you're constantly cleaning after yourself
That what I saw 👀
À
Àeqzq
Phil Hartman's carpenter skit comes to mind.
Clean as you go, less mess later.
Congratulations for
1) not having any kind of music
2) your smart idea
3) your skills
4) not boring to clean
5) the time-lapse
Thank you Konstantinos for the detailed feedback! Really appreciate you taking the time to drop a comment. Super helpful. Really glad you liked the no music approach. It was a last-minute decision which I'm now really glad I did. Have a great day!
Definitely love the no music part. Love the other stuff too, just want to cast extra votes for no music. 😎
Agreed
1-3... But the clean and having two drills... That guy is showing off his bogo deal.
As a person with a 1 car garage this helps out amazingly for space saving.
Future retirement dream ; wood shop.
The folding legs with removable wheels is genius. I have a plywood cover for the box of my truck with folding legs to use as a table when off the truck. Your folding leg design with removable wheels would be perfect to make the table even more portable. Cheers!
Awesome! Really glad this gave you some new ideas to consider. 🤗
This was great. Also, THANK YOU for not adding music. I love the natural sounds.
I get it, but how natural is it? It's sped up quite bit, so I wouldn't say its natural. 🤪
@@SystemsPlanet why do you hate chipmunks?
This is by far the best design I ever see on youtube. Excellent idea of casters attachment. No ad, no BS, right to the essential points. Bravo !
Wow, thanks for the kind words Jason! Really glad you liked it. 🤗
I would simplify the casters/legs by extending the length of the table a few inches so that the casters can be attached to the legs directly and not interfere with each other when he legs are folded.
@@nauy The point is that with the casters attached in a fixed position, the workbench wouldn't be that stable anymore.
Note that in the video, he only uses the casters to move the workbench to the desired position, then folds them away, so the workbench is standing directly on the legs, not on the casters anymore (which is MUCH more stable than it standing on the - locked - casters!).
As a millworker, really appreciate the clean as you go/vac use. Little clean up as you work means a safer site/less mess over all. The table is a good idea too
Cool build. I just bought a couple of those plastic folding tables to save myself some time and effort. I use it outside at night for astronomy too and I don't have to worry about damp wood warping.
yup i can relate to Carl Calderon below ... just finishing up the project myself ... used 4X4 throughout and a few different parts : foot press wheels, interlocking plates for the center member, 2X 3/4" MDF surface with shellac finish AND the piece de resistance -- T Track cross hatch ... just a tad over $150 BUT well worth it ... i'll finish the edging with some maple eventually ..
thanks very much for this inspirational video
Nice job! I had an old oak desktop, put folding metal legs on it and then put 2 hooks on it to hang on the wall...took me 15 mins.
😂👍
love how you clean every last bit of saw dust after each cut/drill. :)
The Superman move and crash into the wall was hilarious. Definitely going to build me one of these.
I just finished watching and I’m bloody exhausted
Nice job after a nap I’m going to start my work bench project.
Love how you clean as you go. It virtually eliminates the big clean up at the end. I'm going to try it on my next project.
Finally, someone who understands! Thank you! 💖
lol 👴 tell the trurh, your wife hollers at you whe she see sawdust
Plus, he's not tracking it around to places he might not notice later in the process!
@@stuff4salefromkraigzlist281 I never said she didn't. ; )
Really appreciate that you don't have any music nor a voice over. Thank you for a great video!
2 years later this is more like a $250-$300 project. I just ordered everything from HD and it was about $250 and I had a couple of the screws already. Great project, just what I was looking for.
Now I'm starting to see all the workbench builds like this.
One word - “Ingenious”. You proved in this video that creativity has no limits! And, how to make the best with what you have!
Thanks for sharing your idea and making the best video!
Thank you for the very kind reply and feedback Mani! Blessings.
Just built the 5ft workbench with flip out wheels. I had to use a chain and bolt to the cross support because the Eye Hooks were not strong enough to hold the flipped wheels. Nice table, but I’m going to sell it for about what I got into it. I might do it again, but go to 6 ft and skip the flipped wheels. Bigger table, actually better for stability and simpler. Thanks for your video.
So clean. So organized. The world needs more of you.
Thank you 🥰
Neat build I also enjoy building work tables I tend to make them weight 700-1000 lbs though couldn’t imagine hanging them on the wall though. For everyone reading this in the year 2134 get outside and build something anything there’s so much pleasure from building.
I'm a woman and I don't do this kind of thing but this has to be the most amazing project I've ever seen.
I am encouraged as a woman, who has always desired to do this kind of craft! Thanks for sharing!
I like build videos that DON'T require Master Level skills and really expensive tools. This video meets those requirements I am quite sure I could build this with the skills and tools I have with just a couple new ones like the pocket hole jigs. Keep up the good work and I would like to see more ideas to try.
Now that is rad
Word! Rad indeed!
How have I not seen this already? Only took a year but I finally saw it today. I need to make this project!! Thanks for posting.
This is great! My husband would never have it tidy enough to put back on the wall though lol
Hell I wouldn't have thought to shop vac the saw dust lol
I love the way you used the work bench you were building to build the work bench you were building.
Love love love this! Cleanest workspace ever! Clean as you go is always my motto. Love that there’s not a lot of talk and just getting to the project. Very cool design. Cute kid too. We’re subscribing!
Thank you Damon & Tracy! Glad you enjoyed this. 🥰
This is just fun to watch!!! I have NO desire to do any of this-I’m an old crippled lady. But I sure enjoy watching you make stuff and you make me laugh! I appreciate no words, the fast motion, and the sounds are quite satisfying, not obnoxiously loud, thank you! And I want a JD tractor toy for my grandsons!!!
Thank you for watching Leslie! Glad you enjoyed it. 🤗
I would highly recommend the dust collection attachment for the pocket hole jig, works incredibly well and it seems you are very focused on eliminating dust right as it is made, so I would consider this a worthwhile investment
Hey Matthew, yeah, I've looked into it. Problem is that my shopvac hose doesn't seem to fit any of the attachments. 🤔 Thanks for the recommendation.
@@VisualSpicer understood, I had the same issue, so I just got a transition piece from the hardware store for a couple bucks. Just a suggestion
I purchased your plans and built it. I love it. I made some slight changes like 1/4 inch x inch lag bolts for mounting the caster wheels.
This is the perfect addition when needing a spacious workbench that stores so I can park my truck in the garage. Thanks.
Very cool design! I can't imagine having enough wall-space or ever fully emptying my worktable though!
Exactly my thought - cool project, but it seems a rare scenario that someone simultaneously does not have floor room for a workbench, but has plenty of wall space.
I just built this awesome folding shop table using the plans from Etsy and even used the links embedded in the PDF to find most of the materials which was a huge time saver (for those who don't yet know, the box stores apps and websites will tell you the exact aisle and bay of an in-store item as long as you have the correct store selected). This went together so easily and perfectly and is a beautiful space saving design in my long narrow shop. The only thing I kinda goofed on was the location of the bolt holes. Those need to be precise if you want a table that doesn't wobble. This is no fault of the design/plans but even though I measured and marked the drill locations with calipers, the 1/2" bit made the boards wander a bit on the drill press so I wish I had built a jig to secure them before drilling. I fixed this issue by measuring up from the bottom surface of the table top to the end of the shortest leg and then marking that location on all the remaining legs and cutting on mitre saw. That will hopefully save others some headaches if they run into the same issue. A better idea would be to assemble the legs and clamp them in place on the frame before rounding the ends and then drill through all 3 pieces of 2x4 for the bolts. The only other tip I would add for this great design is to make sure you sift through all the garbage lumber at the box stores and get the really straight 2x4's that have zero twist or crowning. Again, this will ensure you have a level table top with no wobble once you're done. Great design, thanks for posting. Well worth the meager sum paid for the plans. Oh, and the plans have an update on the hinge locations which I used and they turned out perfect! No need to cut a rabbit in the legs. Thanks for posting this. I will use this for the rest of my life!
Great build! I really like the idea of being able to collapse the whole thing and store it on the wall. I need to build a shelving unit first, but I will keep this bench in mind for the future. I think my favorite part was the sock dance...just wish it would have gone on longer! Great video.
Excellent table idea, especially when space is a factor for most urban city people. It is about time someone thought of this...great!!!😁
Thank you! Glad you like this. 👍
This guy is a rockstar! Freaking love this!🔥
Ok. First things first! I completely lost it when you went flying across the garage! That was F-ing HILARIOUS!!! Cool bench!
Watched the whole thing. NASA precision. Would love to see this design, 1) brought to consumers, and 2) the originator cash in big from it.
Yes hard to find the orginator, I saw this video th-cam.com/video/RGwB6Tq2Alk/w-d-xo.html
done months before this one.
Great idea , stores , moves , and don't move and simple to build .
The first half of the video I'm like "man why is he doing all this work on the floor?" And then I realized, at some point he thought that too so he decided he needed to build a work bench.
Haha, yup, working on the floor is not optimal. So glad I don't have to do that now! 😁
Hahahah!!!! Duh! This comment made me laugh! TY
LOL!
So your the second guy I’ve seen build this table . The first guy I seen a couple of weeks ago . Nice table
Only thing I would have done differently would have been to bring the 2x4's all the way to one edge of the table and make a quick release attachment for a vise... and maybe one that will work with a grinder too... and maybe shield that end with some sheet stainless steel. lol
I would always recommend leaving at least one side resest. A wood worker always needs an edge for clamping purposes.
Watching this video, I learn many new things, it's very fun, I wish you good health
Imagine how much shit you could get done if you really could work at that speed! After he drilled all those holes using that jig, whew, I had to sit down and take a break!!
This is an awesome invention. I really should build a couple for my garage.
very nice. Used this as a basis for a wall mounted, fold down workbench. Lot of good ideas here.
That's rad! This is perfect for my outdoor shop area! Thank you! I'll be building one of these this week.
A man with few words but the work says 10 million words. ❤
Turn it vertically on the wall, so it only takes up 30 inches of width.
Yeah and good luck getting it up against the wall. 😅
I love the way you keep your garage so clean and organized. It take ms less than a minute to vacuum after a few cuts. Hopefully I can pick up this amazing habit. Awesome job.
Thank you Lex! Love keeping the workspace tidy. 😊
Favorite parts:
The saw that goes "Whaaaaa"
and the sander that goes "Wheeeeeeee"
Доброго всем времени суток! Молодец!!!Очень всё продуманно и функционально!Спасибо за красивое и полезное видио!Дело мастера боится!👏
i love that part where just at edge of off camera you smash ur face into the wall LOL
😅
wow, what a great design. A few years ago I built a custom workbench to fit the corner of my garage. It's heavy duty as hell, mobil (uses casters and built-in car jacks on each side, kind of a crazy design) and super useful....when I NEED TO USE IT. That's the problem...I don't use it that much and it takes up a decent amount of space I COULD be using for my lawnmower, kids bikes, etc. I love the idea of building a "fold-away" workbench like yours. I would lose some strength, but the additional space when I not doing a project would be really nice. Anyway, great build, sir !!
I was just telling my daughter I wanted to build her a table that folded against the wall...lol
Unbelievable, now i have to inspire my husband to build it!
Love to see none adding music video like this
Thank you Linh. Glad that worked well for you!
Im not a fan but i enjoyed
Wow.... Like watching a magician at work, pure enjoyment, thank youuuuu 👍💪💪💪😍😍😍💝💝💝💝💝💝💝💝
Is amazing table, sorry My lenguage, i from argentina
Hola
Absolutely GENIUS! For someone like me who has such a small work area in their garage, that's a game changer.
Glad you like it!
When you need to clean the floor everything you make a cut, you know, who is the boss in that house kkkkkkk
Haha, my wife and I always work to keep the house clean, but she is way more obsessive about it than I am! 😅
Wow that’s awsome. I have a garage and half I usually move my wife’s car out of the garage so I can do woodworking always wanted a work bench just don’t have the room this gives me a great idea thanks
Bro, you don’t own a table saw? I’m impressed.
I know! I'm one of those people who actually parks cars in the garage. 😊
@@VisualSpicer yeah I saw your crosstrek there you crazy fool (while my crosstrek and wrx are both filthy and pooped on in the driveway)
@@VisualSpicer holy crap. Yall exist!!!
@@VisualSpicer ll)llllll)llllllll to llill
Thank you for the video and thank you very much for not playing music in the background
Last night, I spoke to my wife about a table that could be stored flat against the wall. Today, this video is suggested... One might think TH-cam is listening.
Oh, they are listening.
Bro. Your right.
I think your wife just gave you "the face" and your typed it in the searchfield ;-)
Great idea! I will make something like that but from existing table and keeping it fixed to the wall on hinges. And great intro riding the table!
*watches him ride the table across the floor* admit it... you built it expressly for that purpose 😏
Haha, you got me there Travis. That's all I do is surf my table around the garage. 😁
@@VisualSpicer it's a neat table setup. Handy if you need the open floor frequently.
Dear Sir
Very solid and strong workbench. As your workbench fits to the wall, you are also very much fit physically. I loved the way you jumped on the workbench.
This is the most OCD person on TH-cam. Dude vacuums after every time he does any drill or cut haha. But dope workbench.
Hah, you got me there, I do try to keep things very tidy and wood shavings drive me crazy! 😅
Most finish carpenters vacuum during work.
VisualSpicer need a backpack vacuum
Saw dust on concrete can be deadly.
Hah, great idea! 🤗
I finally built it!!! I purchased your plans, but they are not clear for a beginner. I watched your TH-cam video and paused and figured things out that way. You should have them include the link to your video with your plans. Just a suggestion. I did do the hinges the way you suggested instead of how you did it and works great , you just have to mount hinge a little lower on the leg. Awesome build, and thank you for taking the time to share and show. Can't wait to try another one of your builds now that I have a work bench.
Awesome! Thank you for getting the plans and building! 🤗 Sorry for the level of difficulty. It's my first DIY woodworking plan, which I'm sure I could have done a better job designing. Will get it next time!
What are the specs and what parts did you use, hinges , screws, etc.
It is in the vids description
Huge kudo points for showing the finished product at the beginning of the video to let the viewer know what end product is intended to be, along with some of the key features, before you show how you did it. There are far too many videos out there showing a craftsman creating a masterpiece, but you may never know until 2/3 of the way through the video where you say, “Oh, so that’s what he’s building!”
Thank you James! Really glad you think that worked well. Will keep that in mind for future videos. 👍
@@VisualSpicer I think I’ve seen one other video of yours so far. I guess I’ll have to subscribe and dig a little deeper. Keep up the creative work!
Good work. Only 2 latches at upper side won't stop the bench falling off if being pulled at lower side. Suggest to have lower side locks to protect kids.
I like your video, missing details you need to put measurements at least to explain how you build it .....
Good luck for the next one
That’s a great idea. Would be cool to have something like this in a small condo’s living room for dinning and for multipurpose .
Why are you down on the floor on your knees crawling around on the concrete with no knee pads why dont you use a work table and get your work up?
Awesome build ! I searched up wheels on work table and came across your video and subscribed. I’m a lady looking for information like 👍 this. I’m happy I came across yours !. Great inspiration 🌝
Starting early is the best way of getting ahead to build wealth, investing remains a priority. The stock market has plenty of opportunities to earn a decent payouts, with the right skills and proper understanding of how the market works.
Great ideas, I don't even trade without investing with an expert or signing up for mentorship.
Assets that one can invest on, to become successful in life.
STOCK
CRYPTO
SHARES
To invest is not a problem but getting the returns and profits is where most of us has problem.
@@mukailasuleman5717 So stop wasting your time with fake profile, like i have once lost my hard earned money on fake sites but thanks to manager Jay Pelle FX
at this present economic crisis, telling anyone about those assets to invest on, isn't financial advice, but by all factors It is a life advice.
amazing, just amazing, my friend woodworker say its great! hi from Russia, Siberia
Does your husband get upset if you have saw dust on the garage floor?
Boy; you sure work fast! 15 minutes to build a table wow 👏 LOL Great idea as well good job too. 👏👏👏👏👍👍👍🙂🙂🙂
you are crazy, I love it, will build same but different size in my garage! Thanks a lot!
I need this in my sewing workspace.
What an inspirational video and
No talk
No music
Keep uo your great work.
Subscribed
I was sold on the rolling Superman at the beginning of the video... oh sure, unfolding it and pulling it off the wall was cool, but something that complex, and you can have fun with it? I want one...
Haha, thanks SoleSurvivor, glad you liked that! 😅
@@VisualSpicer the first time you took it off the wall I thought you had some clever joint holding the table to the wall, (the way it looked being unfolded from the wall just before you rolled it away; simple still works best... Very nice build.
It's a beautiful and sturdy piece.
Nice design. Materials at Home Depot now run about $300 for this project, started it yesterday and look forward to the result!
Yikes! Thanks for the heads up! Inflation sux. 😣
Thanks for the great plans. I really enjoyed this build. The only difference was that I added two stretchers to the bottom so I could place a plywood shelf there while working on my projects. Also, I payed around $200 for all the supplies at Home Depot. Thanks again!
That's a great idea!
I like the song says
This is how you do it job well done
The table is very useful! Let's create more products!
Great idea. Only piece of caution I have is to make sure there is something t secure the bottom of the table when stored away, just in case it gets bumped
Danke für das Hochladen 👍 👍 👍
L ♥️ 🌞 G
Germany Berlin. 👍
I added wheels to my workbench as you did for your's although it's damn heavy so may need to rig up some kind of pulley system to flip them under on my own!! brilliant idea though - kudos! just so happened that when we shortened the legs to make my workbench what I considered the right height, it turned out to be exactly the same height as me saw bench, once the wheels flipped out - quite by accident!!
finally!!! TH-cam actually recommending good content! I started watching the preview but had to click the link..... I say who cares what the haters say! any carpenter would be happy with your work! if you lived in Australia I would of probably payed for one to be built 😁👌
Some great ideas/methods here even if you dont need it to fold.
Just sharing a tip, if you chuck one of the hooks into your drill it can be used to drive the eyelets etc easier than pliers without marring
Great tip. Thanks JR!
Hola amigo, muchas gracias por compartir sus conocimientos,y creatividad, en fabricar mesa desplegable,muy buena idea,desde Tuluá Colombia le saludo.
This is great, I’m making a pallet table, but rather stumped just how to make the legs function well!
The most impressive part of all this is that it was done in only 15 minutes.