Komatsu 830E tyre change

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 พ.ย. 2024

ความคิดเห็น • 41

  • @kells3411
    @kells3411 2 ปีที่แล้ว +2

    They did a lot more to it than just a tyre Brakes * dual rotor with new hubs and bearings and seals, might as well, it's all part of it, those have to be split rims.

  • @PaulHigby
    @PaulHigby 9 ปีที่แล้ว +6

    Sure would have enjoyed your use of a tripod (and/or image stabilization) and some editing software to eliminate unnecessary pans and a lighter touch on the zoom. Aside from that, fun to watch some big equipment at work.

    • @richard0909renwat
      @richard0909renwat 7 ปีที่แล้ว +5

      P Higby hes a mechanic or a tyre fitter not a fucking photographer

    • @PaulHigby
      @PaulHigby 7 ปีที่แล้ว

      Yeah, I'm not an effing photographer either, but I do my best to keep the camera still. I liked watching the video, aside from the fact it was hard to follow, which sorta defeats the purpose of sharing a video.

  • @gizmo98632
    @gizmo98632 9 ปีที่แล้ว +4

    I think it should be called hub change as it looked like they were putting old dirty tires back on it

    • @ankhnybayarbattulga9991
      @ankhnybayarbattulga9991 9 ปีที่แล้ว +3

      This is clean job!!!! angry!!!

    • @blakethefoxxo5162
      @blakethefoxxo5162 5 ปีที่แล้ว

      I can't imagine how expensive those things would be, considering tires for my pickup truck are about $150 a pop

    • @Coltlov
      @Coltlov 5 ปีที่แล้ว +1

      @@blakethefoxxo5162 I change tires on CAT 797 haul trucks, 59/80 r 63. Wheel and tire assembly weigh around 18,000 lbs and Tire alone cost $70,000 per tire.

  • @ChannelAlatBerat
    @ChannelAlatBerat 2 ปีที่แล้ว

    Good work

  • @SNIPERPLAYER1
    @SNIPERPLAYER1 8 ปีที่แล้ว

    Well it aint a tyre change just a maintenance job. Where is this pit at?

  • @fergusonpeattie5242
    @fergusonpeattie5242 ปีที่แล้ว

    Hey John are you still in this line of work? I am looking at doing a Traineeship with Otraco. Any thoughts or comments on the role would be appreciated.

    • @statewolfman712
      @statewolfman712 ปีที่แล้ว

      Hey man just some food for thought otraco has the highest employee turnover rate in the industry. Thiess I hear are really good

    • @fergusonpeattie5242
      @fergusonpeattie5242 ปีที่แล้ว

      @@statewolfman712 Thanks mate that's good info. I am in Perth so I haven't seen Thiess here but I am sure they are do you work in this industry?

    • @johnward2913
      @johnward2913  ปีที่แล้ว

      I worked for Otraco for 18 months, no complaints and they have come a long way since then (2010), I say go for it man! 😁😎

    • @fergusonpeattie5242
      @fergusonpeattie5242 ปีที่แล้ว

      Thanks John appreciate your reply cheers mate@@johnward2913

  • @lowercherty
    @lowercherty 5 ปีที่แล้ว

    Is that chain the only rock kicker? Does that actually work better than a kicker bar?

    • @johnward2913
      @johnward2913  5 ปีที่แล้ว

      B Laquisha yeah the chain is the only rock ejector. The chain actually works better than a solid rock ejector, as the chain has some give and didn’t bend and pierce the tyres like a solid bar.

    • @canadiandividendinvestor9740
      @canadiandividendinvestor9740 5 ปีที่แล้ว

      Chain doesn't work with the 930E wheel motor due to the cooling ribs in the middle and air line getting damaged by the chain. Can be ran without rock ejectors, honestly.

  • @حسنابوحديد-ه9ح
    @حسنابوحديد-ه9ح 9 ปีที่แล้ว

    سلمت يداك الله يسلمك

  • @Amazing_vids_asr
    @Amazing_vids_asr 3 ปีที่แล้ว

    Wat is the price of this tyre

  • @nidalaussiepies8367
    @nidalaussiepies8367 9 ปีที่แล้ว

    it would be a lot quicker to have a guide tube in place to avoid damage or slow wheel change. some people just do things the hard way.

  • @cuckingfunt9353
    @cuckingfunt9353 9 ปีที่แล้ว

    That dude is hard at it.....
    Well maybe a little bit of pretentiousness but, if he is shifting like that all day work will get done.

  • @duketube100
    @duketube100 8 ปีที่แล้ว

    couldnt he just pick up that ring spacer and shove it on with hand?..looks light

    • @lowercherty
      @lowercherty 5 ปีที่แล้ว +2

      Only weighed about 100 kg. Why hurt himself picking it up if he has a machine to do it. Safety first!

  • @MBRINC10
    @MBRINC10 7 ปีที่แล้ว +1

    Thats definately a lot of work to change a tire. My RC construction equipment is easy. LOL

  • @vst9266
    @vst9266 3 ปีที่แล้ว

    The same way i change my car's tires.

  • @redlabel3977
    @redlabel3977 3 ปีที่แล้ว

    Pimp my ride 🤹‍♂️

  • @reidponiesc4
    @reidponiesc4 9 ปีที่แล้ว

    where is this?

  • @joeblogs5163
    @joeblogs5163 3 ปีที่แล้ว +1

    Need a bit more practice if he wants to get in the F1 tyre change team.

  • @edivanildonunes775
    @edivanildonunes775 3 ปีที่แล้ว

    Top

  • @donandroz
    @donandroz 9 ปีที่แล้ว

    fuck that was only half the job,what a waste of time that was

  • @nicklaane5491
    @nicklaane5491 5 ปีที่แล้ว

    HD1

    • @johnward2913
      @johnward2913  5 ปีที่แล้ว

      Correct! Many years ago now! 😎

  • @romeogrigoras9378
    @romeogrigoras9378 2 ปีที่แล้ว

    Where was that?