Noticed abit of jello in the insta360 recording on the punch out - does this only occur during punch outs? Thanks for the great review, looking to get one!
@@bennedictbyy Its pretty cool but the Nebula leaves a little to desired. Doesn't render high contrast areas well such as trees can become flat and colors over saturated but... its still better than analog I think
@@bennedictbyy Yes. it has been thought but I would have to make a new camera mount as the current one is just too small for it but I see Ummagawd made his version with the Vista cam I think. Maybe if I upgrade the motors for more power I will consider doing this.
Just biught this I’m confused what module you have in the goggles and what is antenna’s you used , as mine not have a good video signal except for few meters!
I’m hoping to get this for Christmas . Currently I have a meteor 75 and it’s quite broken and it keeps jerking in the air. Do you know what might be causing this?
I just bought mine and have betaflight 10.6.0 because i also have a tinyhawk, will that betaflight not work? And how do i know which betaflight to use? I can’t find anywhere that specifically states how to work this damn thing
Hey i just flashed betaflight 4.2.9 on my 95x and can’t remember the ports tab, can you please tell me what uart the vtx is on and if it’s tbs smartaudio or which one?? Also i have 3 different uarts so if there’s anything else that’s supposed to be in the ports tab can you please let me know🙏🏼🙏🏼
I've got the original BetaFPV Beta95X (vs 1) and loving it! It's a great little started FPV ....plenty fast for me right now. I have been eyeing up this VS 2.0 though. Liking the idea I can do a naked GoPro mount with in. I like that they moved the battery to the top on the vs 2. Thanks for the review. Oh, and the Caddx Vista system is excellent..loving that too! On a side note, I did break my VS1 whoop frame (I believe version 2 is made from same material). I used J-B Weld Plastic Bonder and fixed it like new.
Nice review :D noob question here.. sadly it’s not available with crossfire anymore. Only frsky. If I buy this one can I still switch it myself to crossfire?
I turned many quads upside down because pusher configuration also makes prop mounting easier. You don´t need screws because the thrust pushes the props towards the motors.
@@cmacclelNo they don't. Some are flying T-Mount without screws in normal configuration, too. This does not work for me but if you turn it like this, it is not a problem. The shaft is tight enough to hold the prop.
@@cmacclel To save the weight of these screws and because it just works. Maybe you did not try and just troll around here. People cut threads into carbon to save the nuts, they buy expensive titanium screws,... You think that´s stuipd - I don´t care what you think.
@@kobi-kobsen Nor do I care what you think. Like I'm really going to risk saving 1 gram of weight and risk crashing a $300 95X v2 with a $300 Gopro attached....LOL
@@dronecamps In the video you do mention a 4S 650 for long flight battery. So you meant 3S? Sorry I just don't want to buy unnecessary amount of batteries ha.
I just got this bnf 95xv2. it came with a broken motor and finally I got a replacement in the mail. Today I got it up in the air for the first time and its dancing all over in no wind at all. It feels way way harder to control than my other setup the GEPRC HD Phantom. Im new to FPV, this is my first real whoop is there anything you suggest to fix an issue like this? It flies and I can control it but its not stable nor smooth in any sense...
Hey can you tell me what the pids are? I really need them cause I messed up my drone and have very bad vibrations now... It would be very helpful, thanks :)
How would i get this to bind in betaflight using the CLI? I’ve tried 3 different binding commands and they all say incorrect or they don’t work. What is the correct bind command to get the quad into bind mode? Thanks i appreciate all the help I’ve gotten from you lately!!
I've been flying and loving it with the 650 4S battery. Is anyone running any larger battery? I would love to increase the flight time if I can. I'm currently averaging about 5 minutes per flight.
Awesome review! Can you run 3s batteries on it as well? (the link in the video description goes to a tattu 3s battery on banggood, I think it should be the 4s right?). I'm curious, did you have any issues with the stock 450mah batteries ( < 1 min flight time) or hot motors? See a lot of disappointed people in the facebook groups with problems after some flights, but also a lot of positive reviews...
@@parisdelaney6340 Nope. I looked around and realized that a lot of people have the same issue with stock PIDs. I haven't tried, but I guess you can try to lower the D gain as it will not bring the motors to that hot anymore. Maybe look around in Joshua's PID Masterclass for more understanding.
Insta360 has a package listed on their site with this quad that includes a 360go, granted it’s like $40 cheaper to buy the quad on getfpv and the 360go during the sale going on currently.
Can we use HV batteries with these quads? I just got mine and it's my first quad, I don't know how to handle the throttle just yet and I'm killing those Betafpv 4s 450mah batteries in less than 2 minutes.
Possible to run on HV. Personally I wouldn't get them cuz it is a pain for me to change the charger settings since my charger doesnt have more than 1 preset
![☀ Царь синевупов. Мелкий, качественный, оптимизированный. [BetaFPV BETA95X V2]](http://i.ytimg.com/vi/8QiqWMjh3us/mqdefault.jpg)
![☀ Царь синевупов. Мелкий, качественный, оптимизированный. [BetaFPV BETA95X V2]](/img/tr.png)
Nice looking RC field
Noticed abit of jello in the insta360 recording on the punch out - does this only occur during punch outs? Thanks for the great review, looking to get one!
Yes during high throttle
Just got the DJI Caddix version. This will be my introduction to digital FPV so can't wait to fly especially after seeing what you could do with it.
How was it? the drone and digital
@@bennedictbyy Its pretty cool but the Nebula leaves a little to desired. Doesn't render high contrast areas well such as trees can become flat and colors over saturated but... its still better than analog I think
@@moblades1 I see. Have you thought about changing the nebula to standard vista cam?
@@bennedictbyy Yes. it has been thought but I would have to make a new camera mount as the current one is just too small for it but I see Ummagawd made his version with the Vista cam I think. Maybe if I upgrade the motors for more power I will consider doing this.
How does this compare to the transtec beetle as far as freestyle?
Just biught this I’m confused what module you have in the goggles and what is antenna’s you used , as mine not have a good video signal except for few meters!
What’s the link for the all line lipos? Not finding them in a search. Thanks man.
Will it hold a full size gopro
Would you recommend it for a beginner?
Yes I would.
what pids do i use my motors get hot any suggestions?
well what pids shoild i use
I’m hoping to get this for Christmas . Currently I have a meteor 75 and it’s quite broken and it keeps jerking in the air. Do you know what might be causing this?
Beta 95x v2 you stock setting? i have 95x v2 betaflight 3.5.7 ..🤔
I just bought mine and have betaflight 10.6.0 because i also have a tinyhawk, will that betaflight not work? And how do i know which betaflight to use? I can’t find anywhere that specifically states how to work this damn thing
Hey i just flashed betaflight 4.2.9 on my 95x and can’t remember the ports tab, can you please tell me what uart the vtx is on and if it’s tbs smartaudio or which one?? Also i have 3 different uarts so if there’s anything else that’s supposed to be in the ports tab can you please let me know🙏🏼🙏🏼
Justin, hey, I have a taranisQ X7S - how do I connect this particular drone to it? (I'm VERY NEW to FPV) . All of my Drones are EMAX.
I get like 2-3 minutes flight time using a 450mah battery, you think i should try 650mah? I built the hd version so i have the caddx vista unit
If you just wanted to fly it for fun, can you take off the camera mounts and just fly it like a large pusher power whoop?
Yep!
i did order one last week! Do you like it more than the iFlight Alpha Justin?
Yes more maneuverable
interesting to look at comparison with diatone tycan 25
Can a beginner fly this,I can only fly outdoors 4 acres need something durable, stable, can handle wind ,with the prop guard. Ths 🤙
Wat goggles and tx did u use 4 dis?
do you have a recommended charger for the batteries that go with this drone?
Do you know what the user1 mode is in betaflight?
Greetings a question friend the beta store fpv in which country is it located
I've got the original BetaFPV Beta95X (vs 1) and loving it! It's a great little started FPV ....plenty fast for me right now. I have been eyeing up this VS 2.0 though. Liking the idea I can do a naked GoPro mount with in. I like that they moved the battery to the top on the vs 2. Thanks for the review. Oh, and the Caddx Vista system is excellent..loving that too! On a side note, I did break my VS1 whoop frame (I believe version 2 is made from same material). I used J-B Weld Plastic Bonder and fixed it like new.
What version of betaflight does this use??
Nice review :D noob question here.. sadly it’s not available with crossfire anymore. Only frsky. If I buy this one can I still switch it myself to crossfire?
Yes you can
Got one too! And mine, just like yours, was not set up right concerning the current meter. 30 seconds in and more than 500mAh drawn ;) .
I turned many quads upside down because pusher configuration also makes prop mounting easier. You don´t need screws because the thrust pushes the props towards the motors.
Don't need screws? Huh?? No screws the props will spin on the motor shafts.
@@cmacclelNo they don't. Some are flying T-Mount without screws in normal configuration, too. This does not work for me but if you turn it like this, it is not a problem. The shaft is tight enough to hold the prop.
@@kobi-kobsen Sorry that's just stupid. You get one prop that loosens on the shaft and you crash......why?????
@@cmacclel To save the weight of these screws and because it just works. Maybe you did not try and just troll around here. People cut threads into carbon to save the nuts, they buy expensive titanium screws,... You think that´s stuipd - I don´t care what you think.
@@kobi-kobsen Nor do I care what you think. Like I'm really going to risk saving 1 gram of weight and risk crashing a $300 95X v2 with a $300 Gopro attached....LOL
Are you talking about a 650 3S or 4S battery?
3S
@@dronecamps In the video you do mention a 4S 650 for long flight battery. So you meant 3S? Sorry I just don't want to buy unnecessary amount of batteries ha.
Great! Which camera (FPV HD VR) do you recommend to replace the FPV. ?
would the change be good?
You flight with bf 3.5.7?
Whats the music name in the starting?
Very good review
Same noise level as a regular micro brushless? Damn something must be wrong with mine as it's twice as loud.
I've been trying to get my 95x v2 to arm, im getting video feed but can't get the drone to arm...
Can you make it beep if you can’t find it? Like the tiny hawks?
Yes
Just checked the battery you recommend and I can see it is not a 4s battery but a 3s 650 mah battery. Can we use a 650 mah battery on the 95x v2?
Can I bind this to R9m Lite pro Module?
I just got this bnf 95xv2. it came with a broken motor and finally I got a replacement in the mail. Today I got it up in the air for the first time and its dancing all over in no wind at all. It feels way way harder to control than my other setup the GEPRC HD Phantom. Im new to FPV, this is my first real whoop is there anything you suggest to fix an issue like this? It flies and I can control it but its not stable nor smooth in any sense...
Nicely done review, as usual Justin, thanks! Think the fact it has "no foam bumpers" is actually a positive. Helps out with little to no prop-wash.
Great !! And it was a very thrilling video 😄👍！
Nice video review and thanks for calling it a quad instead of a "Drone". I believe that term has led to so much trouble, especially from the FAA.
That description of "............amazing." should be the industry standard for 5 stars 😂😂😂😂😂
I'm in upstate NY.. hudson valley.. I've seen a nyc group but unless i take the bike it take 1.5 hrs to get there
My 360 go is so many jello 😥😥...
What can I do?
Thanks again for the great advice
Great review. How would this compare to the Tinyhawk 2 Freestyle for acro?
This a completely different beast than the TinyHawk 2. I don't think there are even comparable.
Much much much worse
How do I get that bottom cover?
The design reminds me of the Tinyhawk frame but larger, which I really love. I want this badly.
Hello. Im looking for a fpv drone to get good cinematic footage. Does this come with camera or i have to put my own.
this is more of a stunt/race quad...if ur wanting just footage and pics, look up "camera drones" on Amazon..
@@sirahmadgreazy856 appreciate it bro. Im looking for a cheap one to learn but also decent quality footage
Hey can you tell me what the pids are?
I really need them cause I messed up my drone and have very bad vibrations now...
It would be very helpful, thanks :)
How would i get this to bind in betaflight using the CLI? I’ve tried 3 different binding commands and they all say incorrect or they don’t work. What is the correct bind command to get the quad into bind mode? Thanks i appreciate all the help I’ve gotten from you lately!!
None it doesn't have an SPI receiver
I've been flying and loving it with the 650 4S battery. Is anyone running any larger battery? I would love to increase the flight time if I can. I'm currently averaging about 5 minutes per flight.
my motors gets a little hot i'm running 4s 650mah and 4s 450mah why is that everything is stock i have not touch any of my pids
Awesome review! Can you run 3s batteries on it as well? (the link in the video description goes to a tattu 3s battery on banggood, I think it should be the 4s right?). I'm curious, did you have any issues with the stock 450mah batteries ( < 1 min flight time) or hot motors? See a lot of disappointed people in the facebook groups with problems after some flights, but also a lot of positive reviews...
Yes
I have 2 hot motors at every end of a 4s 450mah 4min flight. Not warm, but hot. Still searching around to see what can I do to fix it
@@bennedictbyy did you ever solve the issue ?
@@parisdelaney6340 Nope. I looked around and realized that a lot of people have the same issue with stock PIDs. I haven't tried, but I guess you can try to lower the D gain as it will not bring the motors to that hot anymore. Maybe look around in Joshua's PID Masterclass for more understanding.
Insta360 has a package listed on their site with this quad that includes a 360go, granted it’s like $40 cheaper to buy the quad on getfpv and the 360go during the sale going on currently.
Which would you recommend for freestyle? V1 or V2
V2
Bro what’s a good simulator I can use my mavic 2 controller with ?
A mavic is a sim 🤮
Can we use HV batteries with these quads? I just got mine and it's my first quad, I don't know how to handle the throttle just yet and I'm killing those Betafpv 4s 450mah batteries in less than 2 minutes.
Possible to run on HV. Personally I wouldn't get them cuz it is a pain for me to change the charger settings since my charger doesnt have more than 1 preset
That drone looks so cool
My first flight was in the wind and it drifted all over the place, I will have try it latter..
great vid
Nice review!! If your not happy with the analog version I'll take it 😂
HHa!
please share pids
Some googles tips for eyeglasses?
I think it does not look weird at all. I think the V2 looks better than the V1...
Looks like a bigger version of the original Tinyhawk, if someone put a version of the Project Mockingbird tune on it, it would be amazing
I got mine this week!! Will fly it on weekend looks amazing the acro mode
It's very good when cinewhoop able to do freestyle.
It's very weird when ppl choose cinewhoop for freestyle.
Ciao Bro mi mandi i tuoi pid?
Amazing flight but image of Insta360 is awfull. Great drone, very good pilot ;-)
I love your videos but can you change up the flying music sometimes please?
I changed the engines for 5000kv
and now it's a pleasure
BetaFPV is junk! Three BNF DOA! I learned my lesson. 😂 Never again for me.
I just got a pnp that you have to take apart to solder the rc. what's the use.
👍👍
First!