MOES WiFi+RF 2 Gang Switch Light Switch Module,Install with Neutral Wire Needed
ฝัง
- เผยแพร่เมื่อ 22 ก.ย. 2022
- Tranform our traditional reset and rocker switch into a smart one by wiring with this 2 Gang switch module with neutral wire and hidding it into the switch box for its mini compact design,featured as the compatibility with MOES APP for smart lighting control by smart phones.
😍Link for purchase: bit.ly/3xOMKVB
#moes #smarthome #smartswitch #smartlighting #homeimprovements #homedecor #installation #wiring
🔔 Don't forget to "Like" this video, leave a "Comment" and "Subscribe" to our channel (IT'S FREE), hitting the bell to all to be notified of new uploads
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
➡ Follow us on Social Media
💙 TWITTER: / moes_smart
🧡 INSTAGRAM: / moes_smart
💜 FACEBOOK: / moessmart
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
☆No Worries After Sale: As a manufacturer, we believe in our products, customer satisfaction is our main goal
![ความรักของยักษ์เขียว (ทศกัณฐ์) - เดี่ยว ไออุ่น [OFFICIAL MUSICVIDEO 4K]](http://i.ytimg.com/vi/yCCy-QVHqK8/mqdefault.jpg)
You have only taken out the red wires from the switch and black wire was all the time connected to switch then at the end from where you got the extra black wire to insert in line?
Can you control this with Home Assistant
what is the difference before / after ?
After wiring the switch module,we then can pair it into the app,then we can control the light by smart phones,this video just show how to install
@@moes.official Then you had to show this part too.
You're
Bawo ni a ti ń bá ti rí àwọn ọmọ tí sì fi wọ́n fi í sínú kòtò ni omi ó fi àwọn ohun tó o lè máa wà nìṣó láti wí fún un pé kí ó rí bí ó 😂😂❤❤❤❤❤❤❤❤❤ Scott Zemek mum Scott Scott Zemek5 ni mo wí tí ó bá sì ní ti àwọn ọmọkùnrin 5
Not sure if you can help but my current set up is 2 gang with one live wire which is daisychained to the other and,
two neutral wires, I’m not sure how should I install it do join both the neutral wires and put it into N?
Only one neutral wire needs to be connected, you can combine two
Что то много проводов . Должно быть три.
Can I use both the switch and the app and can I remotely use this for example if I forget to turn off the lights when I leave home. And are they wifi compatible
Can be controlled remotely, no matter where you are, and compatible with wifi
Will this work without a neutral wire and just a live wire?
This product must have a neutral wire, otherwise it will not work
If you turn off the light using the phone will the wall switch turn on if i press it?
yes, can be opened
I just got the 4 red lines and I'm not sure where's the black and white line.
The color of wires may be different in different regions, black is the live wire, white is the neutral wire
Are you using capacitor?
We connected neutral so no capacitor needed
In the begining,where is the White wire?
Now some families have an extra neutral wire, but some old houses do not have a neutral wire, so you need to find an electrician to separate an extra one. This video is for demonstration only
How do you pair this?
For rocker light switch
:press the switch button for
20 times(ON/OFF cycle for 10 times) until the beep
sounds continuously and rapidly as Di-Di-Di... for
pairing and reset mode.
Whats the purpose of the module. Can it be used without wifi
The function of the module is to allow traditional switches that do not have intelligent functions themselves to have intelligent functions, such as remote control. Even if you are not at home, you can control it through the APP. Timing switching can also be performed, but this module must have wifi to use. You must ensure that the wifi at home is normal.
What is the benefit in this over smart bulbs that sync with wifi
The two cannot be compared together. Different people have different priorities for switches and light bulbs.@@eliias7952
What is the beeping sound
What are the two red wires , live wire or what?
There are two load wires (lamp), the live wire is black
Oh
So live wire is black
So what are the two red wires is neutral line?
hmm if the switch is off and we still can use app to on but the mode is on? and how can we start if no app active?