I retro fitted CC on my 207 sw 1.6hdi last year, all was great till i had a faulty ECU which i replaced, in turn i lost my cruise control i tried with the same mechanic to program CC on new ECU but with no success. Appreciate any ideas
It's probably achievable to re upload onto the new ECU with my software unless the ECU isn't designed to have that feature but that's highly unlikely as they're all unlocked for all features
I have to correct myself. I the chose cc option without speed limiter. Turns out i had to select option in the engine ecu "with" speed limiter. This drop down menu is not locked. Telecoded it and done! Fun fact is that i used a stalk without speed limiter. But it works fine! Used diagbox 7.49.
I have a YOM 2022 Partner and I don't think that it has a clutch switch. The engine will try to start with a gear in and clutch depressed. will it be possible to install a CC? thx
I have installed a cruise control stalk from aliexpress but it does not connect properly,so it only works if you manually put pressure on the lever. Now how can i Pull this lever out again? Just pulling hard😅? Or do i have to unmount the whole steering wheel module?it clicked in, so i hope there is a way to Pull it out without damaging anything,the lever can be damaged since its not working anyways 😉
I retro fitted CC on my 207 sw 1.6hdi last year, all was great till i had a faulty ECU which i replaced, in turn i lost my cruise control i tried with the same mechanic to program CC on new ECU but with no success. Appreciate any ideas
It's probably achievable to re upload onto the new ECU with my software unless the ECU isn't designed to have that feature but that's highly unlikely as they're all unlocked for all features
I have a 1.4 8v from 2007. Mine is greyed out in engine ecu 😔 i could select it in the BSI with no problem. Any ways to unlock this?
@@williamtech4668 could be your tool how up to date is it
@@LIMITLESSMEDIAUK_ diagbox 7.76. well ahead the 207 production date
I have to correct myself. I the chose cc option without speed limiter. Turns out i had to select option in the engine ecu "with" speed limiter. This drop down menu is not locked. Telecoded it and done! Fun fact is that i used a stalk without speed limiter. But it works fine! Used diagbox 7.49.
@@williamtech4668 glad you sorted it
I would like todo this exact upgrade to my 2009 207 CC. How can I get in contact with you to arrange this?
@@redredzimmer give me a message on Instagram mate 😁
I have a YOM 2022 Partner and I don't think that it has a clutch switch. The engine will try to start with a gear in and clutch depressed. will it be possible to install a CC? thx
Any ideas where they got the trim with the cruise control cut out already on there?
It was on eBay off of a 207 with cruise
@@LIMITLESSMEDIAUK_ thank you 🙏
@@shebaluglover9993 no worries 😁
@@LIMITLESSMEDIAUK_ I bought the stuff but can’t get the software to work what headache where are u and how much would u charge to do it
Berlingo b9 XTR should fit...same company, same parts, same position cut outs...
I have installed a cruise control stalk from aliexpress but it does not connect properly,so it only works if you manually put pressure on the lever. Now how can i Pull this lever out again? Just pulling hard😅? Or do i have to unmount the whole steering wheel module?it clicked in, so i hope there is a way to Pull it out without damaging anything,the lever can be damaged since its not working anyways 😉
Little plastic tab behind it you push in to take it out 👌
@@LIMITLESSMEDIAUK_ you mean on the back of the lever itself? Could you please be a bit more precise ✌️