Milwaukee 2 drawer pack out setup

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 39

  • @philipdove1705
    @philipdove1705 3 ปีที่แล้ว +1

    Perfect packout upgrade

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว

      I agree the drawers are the perfect addition to your packout setup

  • @crzafrc
    @crzafrc 3 ปีที่แล้ว +1

    Will the m18 super hawg fit in this pack out ?

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว

      I think so but not 100% sure. I can try it and get back to you

    • @electricianron_New_Jersey
      @electricianron_New_Jersey 2 ปีที่แล้ว +1

      @@FixerMerlin Yes, that would be nice.

  • @nelsoncarpentry
    @nelsoncarpentry 3 ปีที่แล้ว

    I’ve got pretty much the same 2 drawer finish nailer setup. M18 18ga in one with nails in the divider. M18 15ga in the other. I’m hoping the M12 23ga will fit with the 15ga.

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว

      Is that the pin nailer, how do you like it?

  • @cmocmo2277
    @cmocmo2277 2 ปีที่แล้ว

    Does anyone know if the 2 Drawer packouts should fit snuggly onto a full sized mount? I ask because the packout boxes I have all cleate in/clip extremely snuggly into each other but the 2 drawer packout I bought has a lot of play after being cleated/clipped in.

    • @FixerMerlin
      @FixerMerlin  2 ปีที่แล้ว +1

      Now that you mention it there does seem to be a bit more play in the drawers, but it still locks together

    • @cmocmo2277
      @cmocmo2277 2 ปีที่แล้ว

      @@FixerMerlin Thank you! I went pack and double checked. Some of my boxes have play too it just seems like a lot less when they're weighed down with stuff. Thanks for your reply!

    • @FixerMerlin
      @FixerMerlin  2 ปีที่แล้ว +1

      Ya I checked some of my boxes too and some seem to have more play than others but I’ve never actually noticed until you pointed this out. But ya once they’re loaded up with weight it’s not very noticeable.

  • @tighep
    @tighep 3 ปีที่แล้ว

    I'm curious if or how you go about moving these stacks into the jobsite

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว +1

      Depends. I prefer a working out of the trailer especially if I can plug in, and I can show up with everything I need. If it’s just something small I grab my main tool bag as well as any other tools and use those totes to bring those to the work area.
      There have been times when I moved quite a few of the boxes longer term onto a job site, or into the workshop. Ive done that carrying them one by one or with the wheeled base boxes.

    • @tighep
      @tighep 3 ปีที่แล้ว

      @@FixerMerlin Cool - thanks!

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว

      th-cam.com/video/RGTBs4LaAEs/w-d-xo.html
      Many times for smaller service calls I just need this main tool bag and any drill or drivers etc that need to can go in a secondary bag

    • @tighep
      @tighep 3 ปีที่แล้ว +1

      @@FixerMerlin Very interesting. Our main bags are very similar. Thanks for the link!

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว

      What kind of work do you do? I think a lot of tradesmen will have some of the same basic tools and others more specific to the kind of work you do

  • @wandapiedra8973
    @wandapiedra8973 3 ปีที่แล้ว +1

    I have been looking for one for the past 3 months.No where to be found , a two drawer packout .!😩

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว

      Don’t know where you are located but I saw that Home Depot had some 2 drawers in stock today

    • @briannisbet3982
      @briannisbet3982 3 ปีที่แล้ว +1

      Order on line Home Depot

  • @subilgt10
    @subilgt10 3 ปีที่แล้ว

    is that a super sawzall in there?

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว

      Not sure? it’s one of the m18 sawsalls, I think they make even bigger ones

  • @meleisagreene9767
    @meleisagreene9767 3 ปีที่แล้ว

    Can the skilsaw fit in the 2 drawer unit?

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว

      Like the circular saw?

    • @trevortautolo7181
      @trevortautolo7181 3 ปีที่แล้ว +1

      @@FixerMerlin I would like to know this as well. Wondering if my 6 1/4 circ saw will fit

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว

      @@trevortautolo7181 th-cam.com/users/shortsyaWe8MzPrYY?feature=share

    • @trevortautolo7181
      @trevortautolo7181 3 ปีที่แล้ว +1

      @@FixerMerlin thanks for the reply! Appreciate that

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว

      @@trevortautolo7181 much obliged!

  • @torreyintahoe
    @torreyintahoe 3 ปีที่แล้ว +2

    These frickin thinks are as expensive as the tools

    • @FixerMerlin
      @FixerMerlin  3 ปีที่แล้ว +1

      True but I’d say a tool box is a tool, and like with most things in life you get what you pay for!