Bro, I'm having a f450 drone with kk215... It was working fine, but suddenly I had issues with its stablity... It is now totally unstable to fly.... What might have happened
@@techathome everything tried bro.. Even I have reset the board and made the settings from first... The last flight was perfect and i changed the orientation of the drone legs (front side white and back side red) suddenly the next fly was totally unstable. Then I made the drone how it was assembled before then I tried but even then the issues persists.. Help me brother
Brother it happen when dust accumulation on expose mother board of kk. Try to clean it using some old tooth brush. Apply hot glue to cover pins to IC / chips of Kk board U will facr this prob again
Total Middle part is square of 16*16 cm. When converted to that shape it will become (12*12 cm + arm extension) Aluminum length for arms : total= 17cm (in that 4cm inside the frame, 13cm outside) Nut size ,I have choose according to hole size, that you can choose approximately.
Bhaiya please ap frame ka waight bathana or jo aluminum sheet hai vo kitni thick hai
150th like by me 😂😀
What is the thickness of the frame ?
Bro, I'm having a f450 drone with kk215... It was working fine, but suddenly I had issues with its stablity... It is now totally unstable to fly.... What might have happened
Calibrate all ESC's and try.
@@techathome everything tried bro.. Even I have reset the board and made the settings from first... The last flight was perfect and i changed the orientation of the drone legs (front side white and back side red) suddenly the next fly was totally unstable. Then I made the drone how it was assembled before then I tried but even then the issues persists.. Help me brother
Brother it happen when dust accumulation on expose mother board of kk.
Try to clean it using some old tooth brush.
Apply hot glue to cover pins to IC / chips of Kk board
U will facr this prob again
Bro how much does those aluminum rods cost
That u can get some cut pieces in the local shops.
That will be not so costly bro.
For how much did you get
For one complete length it was 120 Rs long back.
@@techathome oh then you bought all of 4 pcs in one length for 120rs ??
Yes , it was a single rod. We cut it.
I like the drone
What is the weight of your frame
Thank you Bhaiya
👍👍👍
And when you will make the full drone and flying test
I have done.
Using APM : th-cam.com/video/S7VZ796W8VA/w-d-xo.html
Using KK board: th-cam.com/video/HZDk2v_d-XM/w-d-xo.html
Bro what material is the frame board
Sorry bro, I don't know that name.
It has alluminium on both sides and rubber at the center.
You can get it in hardware alluminium shops
Bhaiya can you tell me all the measurements of frame
Arms
Middle part
Nut and bolt size
Total Middle part is square of 16*16 cm. When converted to that shape it will become (12*12 cm + arm extension)
Aluminum length for arms : total= 17cm (in that 4cm inside the frame, 13cm outside)
Nut size ,I have choose according to hole size, that you can choose approximately.
Nice one bro
Bro whT is the weight of the frame
I don't know exactly bro, but approximately 250 to 300 grams
What is the weight of the frame
Approx. 250 grams.