Awesome! I used to run an old CNC Swiss lathe with live tooling. This is kinda like that machine on STEROIDS! Only, the CNC Swiss was limited to 1/2 OD max bar stock. Well. . . I only said this was "kinda like" that one.
OMG I hate that shit too.. I see that and think to myself, "oh that didn't go so well" and despite Mazak thinking I'm completely retarded I know I'm not alone... Thank you #Richard Bautsch
If you go to vo-tec school for 6 months, learning how to read measurement instruments ,blue print and understand how to operate the machines, then many companies more than happy to hire you. They will start you out at least 14 per hour
I dont get why you follow the outer contour on the second part when milling the outer. Wouldn't it be quicker to mill them seperately, or is this with mazatrol?
Hi Peter, The majority of the program was made using Mazatrol. the timing gear and engraving is ISO. We made one contour on this program. this part was to do customer demonstrations with. we though that to save time programming, one contour would be easier for the trainees. regards The Hi-Tech Team
@ 8:21 byebye cutting angle on the U-Drill... Should have show it with chattering. Its no blame, its work in progress Milling speeds and feeds are verry nice :p.
Nice video! Ever considered using hpc facemills for the outer planes? Would definitely save a lot of your time and look great even for videos. It would be appreciated to see some cutting informations like cutting depth and spindle speed for each tool. Nice work!
Hi Felix Sentenz, Thank you for the feedback. We shall start to use HPC Facemill on future parts. We are starting to make videos with depth of cut, ap, ae and the cutting data. If you send me your email address I will send you the cutting data we use for what tools. regards. The Hi-Tech Team
Hi Robert, We started machining the material with the u-drill for 5mm deep. As the u-drill needs through-coolant to evacuate the chips we turned the coolant on and then redid the u-drill operation for the video and edited accordingly. regards The Hi-Tech Team
A CNC machine is only as good as the programmers. Machines do what they are told to do. But before that can ever happen, it all starts out on a cad system. The engineer that's doing the drawing is the programmer
Даже при обработке алюминия, вы нарушаете правила ГОСТ... При соблюдении правил допусков и посадок НИКОГДА И НИЗАЧТО нельзя зажимать за зубья, резьбу и тому подобное...
il toolchange potrebbe essere lenta, ma è meglio avere questo di avere più strumenti nella zona di lavorazione con interferenza come una torretta normale. quando il toolchanger ha 32 utensili o più. vi è un meccanismo differente che è più veloce. questa macchina ha solo lo standard 20 strumenti.
Hi Gustavo, We use Mazatrol to make the program for these basic parts. We made a basic g-code subprogram to do the timing gear. This was made by hand with no CAM. With regards to the engraving. We use a small computer program called DESKENGRAVE. It is a free download and can do line or arc engraving. This free software can only make XY co-ordinates. We use MasterCam, Edgecam, MazaCam or Inventor HSM Cam to do 3-5 axis contours or XC engraving. regards The Hi-Tech Team
Ist ja ich nicht schlecht, aber das Fräsen dauert viel zu lange auf diese Art. HPC Fräser und die Taschen gleich komplett gefertigt in der Tiefe. Trochoidales fräsen.
Wir verwenden die einfache Fräsidee, um unseren Schülern zu zeigen, wie sie anfangen sollen. Wir würden gerne Full-Full-Fräsen, aber wir sind nicht unterrichtet CAD / CAM. Wir verwenden Mastercam für Dämonen. Wir haben noch keine pu diese videos auf.
this thing is 100% flexible but it cant take serious cuts thats why there is chatter thats why the video is edited 5 times this machine is useless (except for shaft jobs)
Why those CNCs are so mesmerizing? I just love it.
Awesome! I used to run an old CNC Swiss lathe with live tooling. This is kinda like that machine on STEROIDS! Only, the CNC Swiss was limited to 1/2 OD max bar stock. Well. . . I only said this was "kinda like" that one.
These CNC videos always amaze me.
56' 456 6tle9 7 e9 7 5r5cd42w 7 Yoplait
O8545 5i8
U hb 66 66
Good cnc machine works
I'm fan all different types CNC machines
Nice to watch the U drill going into an already drilled hole.
Richard Bautsch needs coolant obviously
Hi I am from India, do you any idea to make business in Machining field contact me
+91 9789469631
OMG I hate that shit too.. I see that and think to myself, "oh that didn't go so well" and despite Mazak thinking I'm completely retarded I know I'm not alone... Thank you #Richard Bautsch
No dejo de maravillarme de esta preciosa Maquina ¡
Just Awesome working.... Machine..
what's the cutter /gear tooth milling used here? can you put a link?
Drill without chips, awesome😱
Chris Hart lol only a true Machinist find that funny 😆.
In the two faces of course... I suppose that needs coolant and it's bad for the video.
Easier to control chatter with no chips..
I wish they could hire me to watch the robot do its job, I'd never complain.
If you go to vo-tec school for 6 months, learning how to read measurement instruments ,blue print and understand how to operate the machines, then many companies more than happy to hire you. They will start you out at least 14 per hour
I do this every day. Boring as hell once set up is complete and program is proven. Then you're just a button pusher.
I dont get why you follow the outer contour on the second part when milling the outer.
Wouldn't it be quicker to mill them seperately, or is this with mazatrol?
Looks like it was programmed as a full chain, not 3 partial. I'd expect to see a few more approach moves with Mazatrol stock and safety zones.
Hi Peter,
The majority of the program was made using Mazatrol. the timing gear and engraving is ISO.
We made one contour on this program. this part was to do customer demonstrations with. we though that to save time programming, one contour would be easier for the trainees.
regards
The Hi-Tech Team
Betwen milled shape shuld be g0 code as we saw now was all the time g1
ราคากี่บาทคับ
@ 8:21 byebye cutting angle on the U-Drill... Should have show it with chattering. Its no blame, its work in progress
Milling speeds and feeds are verry nice :p.
5:28 Faking it to avoid the screeching. No chips while "drilling", same as before on that same tool.
What is full name of this drive unit and where we use this mill-turn part?
Fantástic machine I love it thanks..
ماشاءاللہ تبارک اللہ
بہت ہی زبردست
Very nice cnc machine job is easy work
How much cost this machine ❤
Nice video! Ever considered using hpc facemills for the outer planes? Would definitely save a lot of your time and look great even for videos. It would be appreciated to see some cutting informations like cutting depth and spindle speed for each tool. Nice work!
Hi Felix Sentenz,
Thank you for the feedback. We shall start to use HPC Facemill on future parts.
We are starting to make videos with depth of cut, ap, ae and the cutting data.
If you send me your email address I will send you the cutting data we use for what tools.
regards.
The Hi-Tech Team
Sure mate - here you go: Felix.sentenz@web.de - thanks a lot !
@@hitechshowroomvideos4557 @ 9:00 is the chamfer tool spinning clockwise or counter clockwise?
@@fredrezfield1629 Really????...WTF do you think!
the rapids on the machine stop so violently it almost feels like its too much
Muito top essas máquinas cnc ... 10
th-cam.com/video/lsrTy6yv2E8/w-d-xo.html
What happened with the u-drill? Did you pre-drilled it? Started to screaming, then cut and there is no swarf at all coming out.
Hi Robert,
We started machining the material with the u-drill for 5mm deep. As the u-drill needs through-coolant to evacuate the chips we turned the coolant on and then redid the u-drill operation for the video and edited accordingly.
regards
The Hi-Tech Team
Please make one video for how to operate machine
How to on power
How to take offsets
How to call in midel of the program
How to call macro
Hi, do you have any info on the timing gear cutter..looks like a sandvik tool?
Hi CNCIT,
what information would you like?
this tool is indeed a Sanvik tool. we also have the ISCAR model of this tool.
Hitech ShowroomVideos
Hi the make of the tool and part number would be fine. Thanks.
John
Hitech ShowroomVideos Thanks..I missed the last bit of your post I will check these cutters out :-) John
Good job
Good cnc machine work job
Hanzhen harmonic drive gear , strain wave reducer, robot joint , over 30 years experience
Lo mejor en máquinas de metal mecánica
هل يوجد وظائف شاغرة في المصنع
Great machine
wow អស្ចារ្យមែនប្រូ មានរបៀបធ្វើprograme ជួយ shareផង
Welches Material habt Ihr da eigentlich benutzt ?
Too bad about the U drill. I was looking forward to seeing it make some chips :-)
Hi jakobv8,
If you see our other videos, the U-Drill machines the solid material. The U-Drill in this video needs coolant for chip evacuation.
exactly i think the drill was ready done with a coolant then later for the video they turned the coolant off
И где можно приобрести, такой станок? Может кто в курсе?
Great machine. I hope you train some young machinist to do it when HAL dies.
👍👍👍 Сколько стоит такой станок, хочу себе такой же
A CNC machine is only as good as the programmers. Machines do what they are told to do. But before that can ever happen, it all starts out on a cad system. The engineer that's doing the drawing is the programmer
Warren T not
No way, the progammer is the poor operator trying to make all the stupid parts engineers/designers make.
فين المكان
Yes
it's great
Даже при обработке алюминия, вы нарушаете правила ГОСТ... При соблюдении правил допусков и посадок НИКОГДА И НИЗАЧТО нельзя зажимать за зубья, резьбу и тому подобное...
Very nice
Legal c.n.c... tmj
you drive very grov
very good
PERFECT
1:29 lol
need cooling
Don't make chips, haha it's a magical drill xD
2nd part will be fast if you cut
Cutouts individual
Waste of time profile the whole part
Just and opinión
Sandvik u-drill gonna empty pass😂
Arise Anbu they aren’t brave enough to send that in dry 😂 lol
La macchina molto bella , a mio parere un po lento il cambio utensile ...
il toolchange potrebbe essere lenta, ma è meglio avere questo di avere più strumenti nella zona di lavorazione con interferenza come una torretta normale. quando il toolchanger ha 32 utensili o più. vi è un meccanismo differente che è più veloce. questa macchina ha solo lo standard 20 strumenti.
What Software Programing?
The engraving might have been made in a CAM program but the rest of the program has probably been made in the mazatrol software on the machine.
Hi Gustavo,
We use Mazatrol to make the program for these basic parts.
We made a basic g-code subprogram to do the timing gear. This was made by hand with no CAM.
With regards to the engraving. We use a small computer program called DESKENGRAVE. It is a free download and can do line or arc engraving.
This free software can only make XY co-ordinates. We use MasterCam, Edgecam, MazaCam or Inventor HSM Cam to do 3-5 axis contours or XC engraving.
regards
The Hi-Tech Team
Hi
1:30 to 1:45 and 5:29 to 5:40 (new (drilling without burr))
Not going to be very accurate if you rough and finish while there was still all that meat on the 2nd end
اتمنا لو املك مثلها بس شكلها غاليه الثمن
cheese
:-).......very nice!
timothy svec Super
Ist ja ich nicht schlecht, aber das Fräsen dauert viel zu lange auf diese Art. HPC Fräser und die Taschen gleich komplett gefertigt in der Tiefe. Trochoidales fräsen.
Wir verwenden die einfache Fräsidee, um unseren Schülern zu zeigen, wie sie anfangen sollen. Wir würden gerne Full-Full-Fräsen, aber wir sind nicht unterrichtet CAD / CAM. Wir verwenden Mastercam für Dämonen. Wir haben noch keine pu diese videos auf.
Hitech ShowroomVideos
dachte ich mir auch so!
Gefreut hat es mich aber das es ein starloch gibt ! ^^
This machine write better than me
2 megapixel
This is no possible is it
Too slow the milling process, you lose a lot of time without machining.
Многовато лишних движений. Я бы на 10-15% сократил время на изготовление.
Right, well, how much does that cost?
Oh, and we're only making 4, 5 if you don't scrap the first one.
😎👍
I have mazak integrek e-420
For those moaning about the u/drill cheat, pour milk into your eyes and you’ll have your answer.
That chattering ugh 😂
Much missing
fooking hell cut down your lead in times
false hole? appreciate vid but where is the swarf? lol.
this thing is 100% flexible
but it cant take serious cuts
thats why there is chatter
thats why the video is edited 5 times
this machine is useless (except for shaft jobs)
claudia33 and you my friend are misinformed
Really? You know what you are talking about? This is a Integrex J-200, you should try the I-200 with Smooth-system.
АГА Блять, а по титану слабо с такими режимами резиания да ко всему еще и без СОЖ.... Показуха одна.
Good cnc machine work job