I would not use a tankless compressor. Direct compressor not only have pressure fluctuation when it gets hot. Running constantly also shortens the life of the unit. A tanked compressor with a good pressure regulator/moisture trap may cost a few hundred HK$ more but it well worth the extra cost.
多謝分享，我考慮嘅問題你都有提到哂 👍🏻
勁....手油都咁靚
The max pressure is not the only criteria. Airflow (liter per minute) is also important.
多謝大佬分享
支持！支持！
9:29個款1 bar嘅泵我試過用黎噴金角同銀角，不過結果係噴銀角OK, 噴金角就噴到一達達。
I would not use a tankless compressor. Direct compressor not only have pressure fluctuation when it gets hot. Running constantly also shortens the life of the unit. A tanked compressor with a good pressure regulator/moisture trap may cost a few hundred HK$ more but it well worth the extra cost.
師兄好勁 , 手油都咁靓
過獎過獎🤣
ps289 一步到位
你個櫃好多塵喎師兄
我仲喺度諗砌咗10年但冇乜點用過噴槍？估唔到係手油大師
係鬼大師，做咗十年用愛發電嘅新手咋🤣
Will腎有冇諗下拍段手油分享😂
我冇乜手油秘技㗎咋🤣
邊條片介紹港島模型鋪？
小弟不如直接介紹你去灣仔東方188最上層既Premium Proshop啦！
請問氣泵HS217有沒有差電? 能拿出室外噴較容易"入境"！
有的
想請問，如果噴金角銀角，用一些充電式噴筆，開到好稀去噴，得唔得？
金銀角呢啲一般都唔建議開太稀，建議揀超過1bar半出力嘅泵安全一啲
手油？？能傳受秘訣嗎？
其實主要都係開油稀釋度要慢慢試，另外記得唔好心急，每一層乾咗先掃第二層，唔好「番筆」。有機會再拍片分享。
想問下HS08，HS317，AS18TA，邊隻工作噪音最細？
噪音就HS08一定最細了
一隻HG要用兩罐消光？
係……聽到e句……有d驚'
因為我習慣分件噴，噴最少兩層。
浩盛泵...最好另外買返個水隔...冇裝真係好煩
咁裝個水隔都唔貴，貴既泵真係貴到識飛lol
我都係自己加返個水隔比個泵，我係用果個正方果個，其實mode 2都夠力噴金屬色