I respect the attention to detail Spoon has with everything. The patience it takes to do things cleanly and not rush to get it done is something to aspire to have
Everyone thinks Spoon is a great welder expect for Spoon, think that is the sign of a true perfectionist. I was going to say I am glad Spoon talked you into the changes to the E36, but let's face it he pretty much told you what he was going to do. Glad you let him and I know you are glad too.
E36 just keeps getting better and better, attention to detail is on point. Also the air duct threw the headlight would just be perfect, also to seal it off somehow so it doesn't get condensation inside the one light he does have
A little tip for Spoon when it comes to Aluminum welding. Rund 30/70 Helium/Argon mix. makes the weldpool alot hotter, less need for preheat and amperage :)
Hey Jimmy(and Spoon) If you guys go to a place that sells car audio stuff, you can pick up a Bass boost port. They kinda look like a big funnel, and they come inn all sizes.. And they work amazing to build your own Headlight/intake for proper cold air intake. It looks really good also if you glue it in the headlight in a proper way.
@@shannacollins4741 aren't they made to provide air for just one cylinder in a engine? Seems kinda tiny to provide air for a complete engine with 6 cylinders. I dont know how much a velocity stack costs, but i guess a bass boost port is much cheaper, And you can easily find them in a bunch of different sizes and length.
@@supertedogpriken a velocity stack is what you put on the outside of a turbo to suck air in and no they aint expensive and no they dont provide air to one cylinder you put them on the port of the turbo to suck air they have nothing to do with the cylinders ! Have you ever seen Sonic203s drag civic he has one on the front of one of his cars! Check it out !
You should mount a vent over the downpipe in the hood to let the heat out and install the brake bias valve inside the cabin so you can adjust it on the fly. Most serious racecars have it done like this.
This team is FIRE JIMMY!!!! It's absolutely awesome to see some as capable as spoon there to help every day. And you didn't lose any of your quality handing the camera and editing to Austin. MAKE A TEMPLATE OF THE FEED TUBE FOR THE TURBO FROM CARDBOARD AND THEN FIND SOMEONE TO 3D PRINT IT FOR YOU
I just love how he still has the Irish culture humour, " Ringss ladddd 🤙" hahha, Love from Ireland Jimmy 🇮🇪 Hopefully you see the true Irish car culture in December, proper felt spec 😎
Jimmy, if you have Spoon make a little plastic trim piece under the new 3rd brake light, and make it tight up against the rear window, it will block the majority of the light in the back of the cabin. You will be able to see much easier!
the car looks so good and sounds like a beast with that bmw engine, usually around here we put extra crankcase ventilation ontop of the valvecover when going e85.
The vibration issue with the upgraded guibos is usually because you're supposed to only run them with solid (or at the very least, very hard urethane) engine/trans/diff/subframe/center bearing mounts. They dont have a lot of flex in them so they really dont like it when any part of the drivetrain can move independently. Most of the places that sell you those guibos will say as much.
I think it would be a cool idea to rig up some sort of easy hydration system for Jimmy, something like a camelback mounted to the back of the roll cage or something like that
Only up and up from here! I remember when you bought this car and I didnt even know you could import them. Youve taught me a lot Jimmy, never stop dude you been grinding for like 6 years straight on YT and the progress is mindblowing, you built an empire. Still have your sticker+signature on my LS Z sticker in my car.
For that headlight buy some black abs plastic tube from Amazon make sure you strengthen that headlight and insure you sucking in air! Heat gun will help you bend it.
Have you done the livery design yet? Let Spoon put a flared inlet in the headlight to the turbo and have him at least put a screen in it. Don’t imagine that any loose bits from making door marks would do it a lot of good. Got new internals for your turbo in your spares kit? It’s just glorious looking for now.
There is a difference between compressor inlet temperature and IAT measured at the sensor in the intake plenum. Even if you bring the IAT up/down 10 deg at the turbo inlet, by the time it’s compressed and intercooled that temperature difference will shrink to a few degrees. Thats why after testing most people realize that it doesnt pay to chase the inlet temperature but rather concentrate on flow. Even if moving a high flowing intake (less flow restriction) to a much more heated spot, the gain in flow are exponentially better for performance than the loss due to temperature.
For the Guibo. a lot of people break them, but the M3 guibo (e36/46, same on e34 m5's as well. partnr: 26112226527) is the cheat code. if you regularly wear those out, something else is wrong. A oem guibe also acts like a shock dampener for the drivetrain, and it's cheaper and easer to change a guibo than an axel or gearbox.
I was going to say that a headlight cut out and turbo guard were needed. I like the attention to detail Spoon brings to this channel. Everything has been elevated and it’s great to watch.
Ha ha, I totally, did NOT get the joke at first, I was just happy about it was not just electronic computer generated music,… buut found out ( I´m to old for those sites I guess? 🤔😋)
Little tip with the stainless steel zip ties, use a needle nose, pull the excess, and twist as you go. Get it snug with the tip of the pliers. Once you got it snug, here’s the magic trick to getting them to not come out, give the locking mechanism a little love tap with anything that resembles a hammer! 5 years and mine haven’t come undone
Yo fr the levelling up this channel has seen is a testament to Jimmy's hardwork. Good to see you thriving Jimmy. Seeing all the homies eat off this YT thing shows the calibre of man you are. S/o to Oakes garage gang. Stay up homies 🤟🏾
Spoon killin it 🦾. Rj, the man behind the scenes keepin the dream alive . So busy,hardly get to see the dude anymore . Need that wheel in my order 😉😂. 💯🍻👊🏼
You better get you some practice in with that RHD Jimmy since your about to go back to Ireland ! And the RHD will help you when driving over in Japan also if you ever decide to go drive at Ebisu or Nikko Circuit with Adam and Sam !
I have no idea about BMW motors but this thing sounds on point 👌 crisp throttle response and smooth Rev 👌 loven what cha doing crew !!! Keep up the great work 💪
So glad Spoon convinced Jimmy to cut it up. It really is a new car now, and it rips. Not to mention it looks so god damn clean! Jimmy and Spoon killed it, but what’s new?
Explaining things in the board was so helpful thank you, I love learning new things from you and your crew, the way you explain things isn’t too technical but still smart at the same time and just easier to understand 🙏🏻
If you plan on competing in that car, even though it would raise iat, make a pipe to keep on the trailer that goes straight from turbo to intake in case your intercooler gets boofed its a quick bypass to make the rest of the comp happen.
did see you are running standard coils. hot tip from sweden, run the vag/audi r8 coils (115r) you get easyer cable management so it dosent go straigt down against the downpipe and burning the wiring. And they work really good for the m50. i run 840whp in my m50b28iv and have no spark issues anymore. 😀
Jimmy use some OEM style heat shields, they work really good at heat protection and they look better than just a piece of sheet metal! Also the e36 looks sooo damn good!
Great build Jimmy 💯 just some coil pack heat shelding, some turbo head light ducting, a good aliment, a tune and sort of removable polycarbonate windows for when it rains ☔ and your done 💯🤙
Gotta say it, RJ and the team kill it on the merch game. Only crew I have never had a missing order or late shipment (and that gear is coming a long way to aus). Well done lads!
Absolutely fricking killing it! But pleeeeease seal the headlight! Love the cut headlight, but you know it's gonna look poopy as soon as some crud or water gets in there
I respect the attention to detail Spoon has with everything. The patience it takes to do things cleanly and not rush to get it done is something to aspire to have
Love spoon,
He pulls up in all the nice Honda’s at the shop
Doing it right the first time saves time in the end, and makes things much easier 👌🏻🤘🏻😎 good job 👌🏻
He killed it on the headlight, looks very clean.
Not doubt he takes pride in his work and it pays off
Everyone thinks Spoon is a great welder expect for Spoon, think that is the sign of a true perfectionist. I was going to say I am glad Spoon talked you into the changes to the E36, but let's face it he pretty much told you what he was going to do. Glad you let him and I know you are glad too.
E36 just keeps getting better and better, attention to detail is on point. Also the air duct threw the headlight would just be perfect, also to seal it off somehow so it doesn't get condensation inside the one light he does have
A little tip for Spoon when it comes to Aluminum welding. Rund 30/70 Helium/Argon mix. makes the weldpool alot hotter, less need for preheat and amperage :)
13:26 Oof... Jimmy dropping the downpipe and chipping that beautiful paint off the shock tower.
Hey Jimmy(and Spoon)
If you guys go to a place that sells car audio stuff, you can pick up a Bass boost port. They kinda look like a big funnel, and they come inn all sizes.. And they work amazing to build your own Headlight/intake for proper cold air intake. It looks really good also if you glue it in the headlight in a proper way.
That’s a dope ass idea 🔥🔥
Why not just use a velocity stack ?
@@shannacollins4741 aren't they made to provide air for just one cylinder in a engine?
Seems kinda tiny to provide air for a complete engine with 6 cylinders.
I dont know how much a velocity stack costs, but i guess a bass boost port is much cheaper, And you can easily find them in a bunch of different sizes and length.
@@supertedogpriken a velocity stack is what you put on the outside of a turbo to suck air in and no they aint expensive and no they dont provide air to one cylinder you put them on the port of the turbo to suck air they have nothing to do with the cylinders ! Have you ever seen Sonic203s drag civic he has one on the front of one of his cars! Check it out !
You should mount a vent over the downpipe in the hood to let the heat out and install the brake bias valve inside the cabin so you can adjust it on the fly. Most serious racecars have it done like this.
This dude is always so freaking busy and still manages to answer my questions on IG. Tha love for this guy go crazy. 🤘🏼🤘🏼🤘🏼
Same here
Big fan of talking to jimmy on ig
Jimmy’s for the culture
This team is FIRE JIMMY!!!! It's absolutely awesome to see some as capable as spoon there to help every day. And you didn't lose any of your quality handing the camera and editing to Austin. MAKE A TEMPLATE OF THE FEED TUBE FOR THE TURBO FROM CARDBOARD AND THEN FIND SOMEONE TO 3D PRINT IT FOR YOU
I just love how he still has the Irish culture humour, " Ringss ladddd 🤙" hahha, Love from Ireland Jimmy 🇮🇪 Hopefully you see the true Irish car culture in December, proper felt spec 😎
Austin is absolutely killing the b roll! Good job dude 👊🏼
The part where it went from spoon cutting to jimmy holding an axle like a bat in the background killed me
I can’t be the only one to notice the the down pipe chipping the paint at 13:26 🥹. Love you Jimmy
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now
The bimmer is my all time favourite car on the channel. Loved seeing all renditions of it.
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now👆.
Yo the headlight mod is pretty sick! You should add halos so there is still a light inside the hole. I think it would add a lot.
Hell yeah 🥵
Agreed
If there was ever a time where this made sense, it's this time.
Jimmy, if you have Spoon make a little plastic trim piece under the new 3rd brake light, and make it tight up against the rear window, it will block the majority of the light in the back of the cabin. You will be able to see much easier!
This my favorite build on the channel, seeing the transformation of this car through the years and where it ultimately ended up is sick af
Car looks so rad. Stepping into the big leagues with the e36
Also with the heat wrap after being wet it stretches a bit, once hot it shrinks tighter! Keep killing it guys!
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now👆...
first team build looks absolutely solid. produced a monster
The amount of smiles and just happy vibes since spoon and new filmer (I'm terrible with names)
The channel has leveled up so much recently
the car looks so good and sounds like a beast with that bmw engine, usually around here we put extra crankcase ventilation ontop of the valvecover when going e85.
This channel gives me life. I feel like I've been following for a hot minute.
The vibration issue with the upgraded guibos is usually because you're supposed to only run them with solid (or at the very least, very hard urethane) engine/trans/diff/subframe/center bearing mounts. They dont have a lot of flex in them so they really dont like it when any part of the drivetrain can move independently. Most of the places that sell you those guibos will say as much.
That intake hole looks factory wow! beautiful work
I respect that Jimmy respects spoons decisions on the build!
The daily uploads have been exactly what I’ve been needing
Hey Jimmy you need to put a filter on that turbo cos the rubber from drifting in a tandem is gonna go through that light and blow your motor up
Wish I could get my hands on that headlight. Would be sick to 3D print an insert for it
I think it would be a cool idea to rig up some sort of easy hydration system for Jimmy, something like a camelback mounted to the back of the roll cage or something like that
Only up and up from here! I remember when you bought this car and I didnt even know you could import them. Youve taught me a lot Jimmy, never stop dude you been grinding for like 6 years straight on YT and the progress is mindblowing, you built an empire. Still have your sticker+signature on my LS Z sticker in my car.
Fab a velocity stack into the headlight with piping to feed the turbo.
Thats what ive been saying
For that headlight buy some black abs plastic tube from Amazon make sure you strengthen that headlight and insure you sucking in air! Heat gun will help you bend it.
Dude the bmw without the muffler sounded insane! I loved it
That E36 sounds so sick boosted
Have you done the livery design yet? Let Spoon put a flared inlet in the headlight to the turbo and have him at least put a screen in it. Don’t imagine that any loose bits from making door marks would do it a lot of good.
Got new internals for your turbo in your spares kit?
It’s just glorious looking for now.
Dude that car is badass. It's awesome what you amd the guys do man
There is a difference between compressor inlet temperature and IAT measured at the sensor in the intake plenum. Even if you bring the IAT up/down 10 deg at the turbo inlet, by the time it’s compressed and intercooled that temperature difference will shrink to a few degrees. Thats why after testing most people realize that it doesnt pay to chase the inlet temperature but rather concentrate on flow. Even if moving a high flowing intake (less flow restriction) to a much more heated spot, the gain in flow are exponentially better for performance than the loss due to temperature.
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now👆...
For the Guibo. a lot of people break them, but the M3 guibo (e36/46, same on e34 m5's as well. partnr: 26112226527) is the cheat code. if you regularly wear those out, something else is wrong.
A oem guibe also acts like a shock dampener for the drivetrain, and it's cheaper and easer to change a guibo than an axel or gearbox.
Shout out Spoon. The channel has always been good content but him being there has increased output massively. Good job boys.
I was going to say that a headlight cut out and turbo guard were needed. I like the attention to detail Spoon brings to this channel. Everything has been elevated and it’s great to watch.
Yes please a turbo guard, I need to see this build rip so much I don't want it to grenade.
I won’t lie, the music choice scared me that I was on the wrong website whenever I heard it haha
LMFAO Phub
We are slowly/hopefully moving towards some groovy heavy 😎🤘🏻
I swear this was my same reaction.
Jimmy got his BGM from Phub
Bruh same I was like hold up
Ha ha, I totally, did NOT get the joke at first, I was just happy about it was not just electronic computer generated music,… buut found out ( I´m to old for those sites I guess? 🤔😋)
Looks good , and sounds sick. Love the e36 chassi 😁🔥
My favorite build is the E36 not being bias whatsoever 😜
You should do some sort of hood vent above the downpipe to help extract some of the heat. In a build like that every little bit helps.
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now👆
Love the new direction.
Spoon killing it with hole in the headlight🔥🔥🔥🔥🔥👍👍👍👍
That last %10 has come out sooo good boys!!! Well done to the whole team especially the spoooonn!! 🤙
this has to be your best sounding car holy shit it sounds insane
Little tip with the stainless steel zip ties, use a needle nose, pull the excess, and twist as you go. Get it snug with the tip of the pliers. Once you got it snug, here’s the magic trick to getting them to not come out, give the locking mechanism a little love tap with anything that resembles a hammer!
5 years and mine haven’t come undone
The e36 is an absolute machine I can’t wait to see get on these doors sounds so good u make every car have its own personality
Love the videos jimmy can’t believe the progression of the builds and you continuing to follow your passion!!
Yo fr the levelling up this channel has seen is a testament to Jimmy's hardwork. Good to see you thriving Jimmy. Seeing all the homies eat off this YT thing shows the calibre of man you are. S/o to Oakes garage gang. Stay up homies 🤟🏾
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now ☝
Spoon killin it 🦾. Rj, the man behind the scenes keepin the dream alive . So busy,hardly get to see the dude anymore . Need that wheel in my order 😉😂. 💯🍻👊🏼
It sounds sooooo good Jimmy wow
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now👆...
smart idea with the head light ..I whould deff make a pipe goin into the turbo. even tho its still good just the way it is
You better get you some practice in with that RHD Jimmy since your about to go back to Ireland ! And the RHD will help you when driving over in Japan also if you ever decide to go drive at Ebisu or Nikko Circuit with Adam and Sam !
I have no idea about BMW motors but this thing sounds on point 👌 crisp throttle response and smooth Rev 👌 loven what cha doing crew !!! Keep up the great work 💪
Honestly loving the team and you made a good choice bringing spoon on board was such a good investment
Holly shit that thing looks absolutely insane sounds insane fkn love it boys! Welldone!!!!!!
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now ☝
So glad Spoon convinced Jimmy to cut it up. It really is a new car now, and it rips. Not to mention it looks so god damn clean! Jimmy and Spoon killed it, but what’s new?
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now ☝
Explaining things in the board was so helpful thank you, I love learning new things from you and your crew, the way you explain things isn’t too technical but still smart at the same time and just easier to understand 🙏🏻
When I was racing BMW,s we used to glue a piece of fuel hose in the propshaft centre bearing to give it some more strength but keep it flexable.
If you plan on competing in that car, even though it would raise iat, make a pipe to keep on the trailer that goes straight from turbo to intake in case your intercooler gets boofed its a quick bypass to make the rest of the comp happen.
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now ☝
This is the team right here forsure everyone seems to compliment each other and y’all all appear to work together well super dope to watch!
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now ☝
Absolutely loving the channel, spoons bringing the heat 😎
The e36 is 🔥🔥🔥🔥 gonna look sick once finished . Livery like 350 ??? Will be great running doors with Adam and Grant in there 36s
I actually like the headlight hole . And man if he would put a wing like lzs would look so fire! Awesome work team!
S50 perfection I have one in a e34 and its just the same you have a very spectacular compaction weapon there
did see you are running standard coils. hot tip from sweden, run the vag/audi r8 coils (115r) you get easyer cable management so it dosent go straigt down against the downpipe and burning the wiring. And they work really good for the m50.
i run 840whp in my m50b28iv and have no spark issues anymore. 😀
The E36 is coming out absolutely fantastic! You guys are crushing it
Congrats to the build team on the BMW, it's awesome to see this thing rip.
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now ☝
loving Spoon's juicebox influence and expertise
Been loving all the E36 content, this was my favorite of the builds
The E36 is my favorite build 🤪
Jimmy use some OEM style heat shields, they work really good at heat protection and they look better than just a piece of sheet metal! Also the e36 looks sooo damn good!
Thing sounds so mean!
Great build Jimmy 💯 just some coil pack heat shelding, some turbo head light ducting, a good aliment, a tune and sort of removable polycarbonate windows for when it rains ☔ and your done 💯🤙
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now👆.
I don’t usually comment on videos, but I really enjoyed this video.
Great team, great work and phenomenal inspiration.
Kudos boys.
Rings laaawd. Great Ireland practice sir 🤘
Said it once, saying it again, E36 came out so good🔥🔥
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now ☝
That thing is a monster 😈🔥🔥🔥
Over there they all had big wings, are you going to wing it too? Think you should...the car sounds and looks fly!
Gotta say it, RJ and the team kill it on the merch game. Only crew I have never had a missing order or late shipment (and that gear is coming a long way to aus). Well done lads!
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now
I know you may not have time right now but this car with a sick livery would be sick!
Sounds amazing!!
cheap tip fore a really good e-fan for the radiatior, buy the volvo 850r e-fan. pulls air like a fighterjet
This thing is coming out sick. I don't think the wheels are it though 🤔
E36 looks soooo goood
thing sounds sick with no muffler third break light looks hella cool at night. 🤔 hood vent on the turbo side if it gets hot??
The e36 is a testament to that all good things take time
Dude, that sounds so good. I like it quite, if you can call that quite.
Morning patreon gang, I ordered a banner on Friday and got it yesterday, yall are amazing
Great build and all the quality and handmade parts and then a mishimoto rad cap😐
I would love if u put a pipe in the headlight hole, would protect the light aswell from dirt and water
Austin’s integration is so smooth. It’s like Jimmy cloned himself to film.
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now👆.
I get a feeling Spoon is going to make an intake pipe for the turbo headlight side.
Absolutely fricking killing it! But pleeeeease seal the headlight! Love the cut headlight, but you know it's gonna look poopy as soon as some crud or water gets in there
Sooooooo clean! I always wanted to see Adams E36 in red with the same livery he has now. Would be so sick.
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now
This thing is coming out so great! And I'm a suckered for red cars too! Great work everyone!
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now ☝
Congrats fellas on the BMW. Build yall smashed it ..
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now ☝
This is one of the best videos you guys have made so far!
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now
R jay is one good friend and employee. Keep up the good work guy.
*Thanks for watching You have been randomly selected among my winners for today telegram Me to claim your prize right now ☝