Man.. love this video!! I have been running my Blackjack 24 for a couple months now, and all I did was replace the stuffing tube (I was messing with the stock one before I even ran it, and broke it) and put the Offshore replacement CNC prop on it, and get 36 mph on it all else stock! Just run a Hovoo (Amazon) 3s 100C pack! Absolutely love this boat!!
You are teaching many how easy it is to just put what you want together❤️👍Been doing this so long and it’s just some math and figuring out what works best together💪🏁
Got about 50-60 runs on my Shockwave 26 and uses the same strut set up and no problems at all!Just gave it to my uncle this weekend for him to enjoy❤️👍
Big B, had some great runs with my Blackjack 24 today. I finally got the CG right and beat out a friends Sonic Wake. Now I can work on my Sonic Wake. No water cooling, I listened to the former owner saying he flushed the rudder input! Wrong! I took the nipple off the rudder and something green was growing inside! I’m going to try Lime-away.
THE speed jump is on the Mill. THE default engine will run too hot on 4 S. I went to a Leopard motor , rated for 14.4 V, and a Seawing 120 , and tied a BJ 29 stock prop in place of the BJ 24 prop. I also updated the strut to a V3. and toed netruel. I also added in line cooling systems ,, to independently cool the speed control. THE prop could be be switched to a balanced Grim Racer. Right now, I getting 34 36 Mph , on 3S and is basically floating on air. On 4 S, , it's freaking rocket. 42-45 Mph. , and nearly impossible to control. It's fun ride , but too fast for that hull. I enjoyed your video. I look forward to more.
How did you keep it on the water at the speed ? THE Miss Giego, Velos 29 , and The BJ 29, can do between 55 -98 , running a 200 Amp controller , and the 6 pole 2000 KV (3650 system, ) which shares the same motor. Running 10 to 12 S. Some peoples. kids. (lol) In the Black jack run, the guy clipped a fish, and launched the boat. It didn't go well. So, to get to 60 with the 24? Minimal 180 -300 ESC. , to be safe. GO to Traxas and/ or an EC5 connectors. . Other wise, You'll melt the battery connection. Trash the prop, and start looking at Octura balanced and sharped props, and this in case, you want Speed, not diameter . AND cupped. / OR the Grim racers. THE math. 6 S gets you to 60, on a stock setup. THE BJ 29, Miss Geigo, and Velos , skirt 60 with the stock prop. THE Grim racer , will take you over that bump. From , there it's get's weird. THE Motor change, Higher KV, will take you close to 70. Upgrade your cooling with 2 inline pick ups , and cap the Rudder line. Increase your tube size , and set two independent lines , MOTOR and speed controller . You , now have a rocket on the water! Good luck! THE Leopard motor, I was talking about. THE replacement is setup to run to run up to 8S. THE Stock BJ 24 , is wound for 3 S. So, you got some great options . One of the guys threw on some M41 stabilizer fins, and that kept the back down , and stable. Another guy set up a tandem rudder assembly. There are a lot of great mod videos out there . The guy , who showed me the Leopard upgrade, was called "Team Baxter." He also did the water inlet mods. Happy Boating ,
Man I ran a seaking 90aamp esc on the stock motor and runs good and added the offshore electric strut kit and flexshaft assembly and my son loves this boat❤️👍
Hey buddy ty for the link for the tape I some today. Hey I noticed on a couple of ur vids that u had a bit of water inside. When I first ran my blk jack I had a few drops. Now that started the Maintenance on it I'm getting more water inside. I thought the grease was supposed to act like a sealant. Any suggestions?
Bet money it's from the stuffing tube. I had the same problem dig out most of the old epoxy and pour some epoxy down where the stuffing tube goes thru. The hull. (No need to pull stuffing tube out.) Also check where the Hardware mounts to the transom proboat doesn't use any sealant on the hardware.
@@IRONCLADRC alright buddy ty I tried out a new bat pack today n it seemed like it was better(more power) then the one I bought with the boat. Same specs but different performance. Original bat is a lectron 7600 mah n the one I bought online is a nhx 7600 mah...have you used those brands b4?
I know I asked you once before,but forgot to write it down...I finally ordered 2 bad ass 90c 6500mah 2s batts for my 30" motly crew cat...today I ran it on a single 4s 3300 50c..I have 180amp turnigy esc and a 1900kv 36-74 turnigy 6 pole...with a plastic 47mm 1.4 top speed was maybe 35mph..very disappointed..after 5min all temps were around 100 degrees..esc was cool..question is what prop will bring this motley crew to the 50 plus mph range and still have good hole launches..? Just tell me diameter and pitch if you can...biggest octura I have is only a 2 blade 42mm..thanks again..
@@IRONCLADRC wow that seems to small in diameter..I am running 4s not 6s...did you make a video on any of your 30 inch cats on 4s 1900kv using this oxiden prop?... you may be spot on I just have to see a setup like mine using it to be sure...thanks again
I bought this boat last Friday 9/17/21 I put a Dynamite 90 amp ESC in it A 4S Gens 6000 MAH Battery ! Instant 47mph on my GPS ! With a Balanced prop done by myself ! Where do you get rubber fittings for copper to up grade to cooling system ? That motor got a little Hot !!!
Be careful running stock motor with 4s high c rated battery's. The extra weight & power to the electronics can heat things up quick. Good luck brother.
Still could sharpen the rudder but I dont know if any gain what so ever. I havent sharpened any of mine. Also do you have the plug in the hull? Thats allot of water in there.
It was the stuffing tube leaking it broke loose and I didn't know it. proboat didn't seal the rudder and strut so it was leaking there too. Fixed all the leaks now she runs dry !!
I saw that BUD BOAT. she's nice. Real nice. I was looking at the miss Vegas at my local hobby shop.Nitro for years now.... I've had my fun with nitro nice boats.
Heck yea I visited your channel & subscribed. I've run that 3650 on 6s several times I believe you'll find that the weak link will be the motor bearings. Keep the videos coming
Hey Iironclad I am about to install my new flycolor 90am esc and leopard 3660 2500 kv motor. I am going to get a 4 S battery to go with it. What brand and MAH do you recommend for this setup? Also can you recommend a decent aftermarket prop that would work well with these upgrades?
It's not self rightning. It come with like a .150 flex and 5mm shaft. I'd go with a offshore electrics replacement cable shaft & strut much more common & reliable. The stock driveline is OK for up to 45-50mph.
Hello Iron. Why Didn't You Just Buy A TP Motor ZTW ESC 200 Amp. Should Make Some Good Wake On The Water Surely Would Be A Better Boat For Speed From Chris.
What kinda boat are you running weight battery, etc. With out doing the math I'd say 50a should be good. I will message you back with a fore sure setup once I know what your working with?
@@Kolsch221 I have a Spektrum 8S Firma 160 amp ESC in my Veles. Stock motor handles 8S well enough. I blew the motor up though because I put a giant prop on it but if you leave the prop alone the motor will run 8S just fine
Thats right. Plus it's a lighter set up with the 2200 4s. Opposed to 8000 100c 3s lots of extra weight with full size 3s, better speed with 4s 2200 lite setup
Mah and c. basically higher mah/c rating heavier battery. Low mah/c rating lite battery. A Boat will most likely get better performance with a lighter setup. I'm was Trying to show the difference between heavy set up high voltage(5000 50c & up heavy) & same voltage lite battery (4000 30c lighter battery) weight plays a big role in a boats performance. I tried 😪
@@nageltermin725 OH the title mentioned upgrade to a 2200kv motor, if the actual rating is 2000kv so be it use that number and the rpms is way to low using 3s battery. give it a try and see what happens, I like to see all the testing, it helps me out too. good luck 👍
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
41mph is haulin ass for that boat💪🏁
Man.. love this video!! I have been running my Blackjack 24 for a couple months now, and all I did was replace the stuffing tube (I was messing with the stock one before I even ran it, and broke it) and put the Offshore replacement CNC prop on it, and get 36 mph on it all else stock! Just run a Hovoo (Amazon) 3s 100C pack! Absolutely love this boat!!
You are teaching many how easy it is to just put what you want together❤️👍Been doing this so long and it’s just some math and figuring out what works best together💪🏁
What’s a good motor kv to run in this boat for speed?
Got about 50-60 runs on my Shockwave 26 and uses the same strut set up and no problems at all!Just gave it to my uncle this weekend for him to enjoy❤️👍
Big B, had some great runs with my Blackjack 24 today. I finally got the CG right and beat out a friends Sonic Wake. Now I can work on my Sonic Wake. No water cooling, I listened to the former owner saying he flushed the rudder input! Wrong! I took the nipple off the rudder and something green was growing inside! I’m going to try Lime-away.
That's awesome man. Good luck with the build
THE speed jump is on the Mill. THE default engine will run too hot on 4 S. I went to a Leopard motor , rated for 14.4 V, and a Seawing 120 , and tied a BJ 29 stock prop in place of the BJ 24 prop. I also updated the strut to a V3. and toed netruel. I also added in line cooling systems ,, to independently cool the speed control. THE prop could be be switched to a balanced Grim Racer. Right now, I getting 34 36 Mph , on 3S and is basically floating on air. On 4 S, , it's freaking rocket. 42-45 Mph. , and nearly impossible to control. It's fun ride , but too fast for that hull.
I enjoyed your video. I look forward to more.
Nice brother I'm trying to break 60mph. 58mph is my fastest with the 24.
How did you keep it on the water at the speed ? THE Miss Giego, Velos 29 , and The BJ 29, can do between 55 -98 , running a 200 Amp controller , and the 6 pole 2000 KV (3650 system, ) which shares the same motor. Running 10 to 12 S.
Some peoples. kids. (lol) In the Black jack run, the guy clipped a fish, and launched the boat. It didn't go well.
So, to get to 60 with the 24? Minimal 180 -300 ESC. , to be safe. GO to Traxas and/ or an EC5 connectors. . Other wise, You'll melt the battery connection. Trash the prop, and start looking at Octura balanced and sharped props, and this in case, you want Speed, not diameter . AND cupped. / OR the Grim racers.
THE math. 6 S gets you to 60, on a stock setup. THE BJ 29, Miss Geigo, and Velos , skirt 60 with the stock prop. THE Grim racer , will take you over that bump. From , there it's get's weird. THE Motor change, Higher KV, will take you close to 70.
Upgrade your cooling with 2 inline pick ups , and cap the Rudder line. Increase your tube size , and set two independent lines , MOTOR and speed controller .
You , now have a rocket on the water!
Good luck!
THE Leopard motor, I was talking about. THE replacement is setup to run to run up to 8S.
THE Stock BJ 24 , is wound for 3 S.
So, you got some great options . One of the guys threw on some M41 stabilizer fins, and that kept the back down , and stable. Another guy set up a tandem rudder assembly. There are a lot of great mod videos out there . The guy , who showed me the Leopard upgrade, was called "Team Baxter." He also did the water inlet mods.
Happy Boating ,
Man I ran a seaking 90aamp esc on the stock motor and runs good and added the offshore electric strut kit and flexshaft assembly and my son loves this boat❤️👍
Yea there he's out of stock on the upgrade strut
Any idea when ose is going to get more strut kits in?
2 million volts? That's wild!
Offshore Electric strut is already drilled and bearing added and let’s you adjust the strut angle with the screws and no more bending your tube👍❤️
I'm from indonesia. I love rc boat you
Great video. try polishing and sharpening the prop for more speed
My boat struts like a chicken do u know what that could be
We pulled motor replaced the 3650 with a 3660 4350 kv at 12 volts..and put the flycolor 120 speed controller..runs great..lot faster..
Hey buddy ty for the link for the tape I some today. Hey I noticed on a couple of ur vids that u had a bit of water inside. When I first ran my blk jack I had a few drops. Now that started the Maintenance on it I'm getting more water inside. I thought the grease was supposed to act like a sealant. Any suggestions?
Bet money it's from the stuffing tube. I had the same problem dig out most of the old epoxy and pour some epoxy down where the stuffing tube goes thru. The hull. (No need to pull stuffing tube out.) Also check where the Hardware mounts to the transom proboat doesn't use any sealant on the hardware.
@@IRONCLADRC alright buddy ty I tried out a new bat pack today n it seemed like it was better(more power) then the one I bought with the boat. Same specs but different performance. Original bat is a lectron 7600 mah n the one I bought online is a nhx 7600 mah...have you used those brands b4?
No. I've herd there good batteries
I know I asked you once before,but forgot to write it down...I finally ordered 2 bad ass 90c 6500mah 2s batts for my 30" motly crew cat...today I ran it on a single 4s 3300 50c..I have 180amp turnigy esc and a 1900kv 36-74 turnigy 6 pole...with a plastic 47mm 1.4 top speed was maybe 35mph..very disappointed..after 5min all temps were around 100 degrees..esc was cool..question is what prop will bring this motley crew to the 50 plus mph range and still have good hole launches..? Just tell me diameter and pitch if you can...biggest octura I have is only a 2 blade 42mm..thanks again..
Oxidean 42 high rake will get you where you wanna be!
@@IRONCLADRC wow that seems to small in diameter..I am running 4s not 6s...did you make a video on any of your 30 inch cats on 4s 1900kv using this oxiden prop?... you may be spot on I just have to see a setup like mine using it to be sure...thanks again
I bought this boat last Friday 9/17/21
I put a Dynamite 90 amp ESC in it
A 4S Gens 6000 MAH Battery !
Instant 47mph on my GPS !
With a Balanced prop done by myself !
Where do you get rubber fittings for copper to up grade to cooling system ?
That motor got a little Hot !!!
Offshore electric has different thru hull fittings for the cooling
Maybe this will help..
exitwww.offshoreelectrics.com/proddetail.php?prod=ose-80905
Be careful running stock motor with 4s high c rated battery's. The extra weight & power to the electronics can heat things up quick. Good luck brother.
@@IRONCLADRC I found out about the over heating, I bought a cooling system separate for the Motor only got it today !
What is the math formula for motor speed control calculations?
First and great video
Second.. lol. Thanks for watching
Still could sharpen the rudder but I dont know if any gain what so ever. I havent sharpened any of mine. Also do you have the plug in the hull? Thats allot of water in there.
It was the stuffing tube leaking it broke loose and I didn't know it. proboat didn't seal the rudder and strut so it was leaking there too. Fixed all the leaks now she runs dry !!
Great work man
Dam weeds and rain has me working on the nitro Hydroplane today😢No playing on the water in days🥱
I saw that BUD BOAT. she's nice. Real nice. I was looking at the miss Vegas at my local hobby shop.Nitro for years now.... I've had my fun with nitro nice boats.
Hi big B,if you have a smart charger for your batteries by spectrume it will tell you how many times the battery was charged
Ima currently running this motor on 5s w 120amp esc and she don’t even get hot.
On a 700bl SuperCat
Just put her on 6s 😂🫠 update video coming soon
Heck yea I visited your channel & subscribed. I've run that 3650 on 6s several times I believe you'll find that the weak link will be the motor bearings. Keep the videos coming
Hey Iironclad I am about to install my new flycolor 90am esc and leopard 3660 2500 kv motor. I am going to get a 4 S battery to go with it. What brand and MAH do you recommend for this setup? Also can you recommend a decent aftermarket prop that would work well with these upgrades?
Smc has a dv extreme 5200 135c 2s battery that will fit perfectly in the 24 I've got a pair I'm about to run in my bj24
@@IRONCLADRC thank you what about a prop recommendation with this setup?
Good day, what is the propeller size of proboat blackjack 24?
Pretty sure it's 3/16
Hi man can you please write info about prop? I don't understand very well English language, sorry. Very nice video
Octura 438. Thinned Balanced & sharpened
@@IRONCLADRC thanks for reply. Stay fast man
Good rc
hi BB. which flexshaft diameter comes with this boat ? is it a self righting boat ?
It's not self rightning. It come with like a .150 flex and 5mm shaft. I'd go with a offshore electrics replacement cable shaft & strut much more common & reliable. The stock driveline is OK for up to 45-50mph.
@@IRONCLADRC thanks ! can you please send me the link to the replacement offshore electrics flex and stutt ..
Hello Iron. Why Didn't You Just Buy A TP Motor ZTW ESC 200 Amp. Should Make Some Good Wake On The Water Surely Would Be A Better Boat For Speed From Chris.
th-cam.com/video/NN4zNvHID9k/w-d-xo.html. I pu a tp power in bj24 3640 2600kv
sir i have my 2958 brushless motor 6500kv, max volt 9v, 1400w, 155 maximum amps, how many amps of esc do i have to use? hope you can help me?
What kinda boat are you running weight battery, etc. With out doing the math I'd say 50a should be good. I will message you back with a fore sure setup once I know what your working with?
What a good kv motor to run in this boat if you want speed?
2000kv lg props - 4000kv top with smaller props
@@IRONCLADRC thanks so much happy New Years
So would that ESC work good in the Veles 29 running 6s?
No I would go with 70a maybe 90a
@@IRONCLADRC thanks for the information. Keep the great boat videos coming!
@@IRONCLADRC what’s your thoughts on adding the stock Veles ESC and motor to the black jack 24?
@@Kolsch221 I have a Spektrum 8S Firma 160 amp ESC in my Veles. Stock motor handles 8S well enough. I blew the motor up though because I put a giant prop on it but if you leave the prop alone the motor will run 8S just fine
@@PigglyWigglyDeluxe is that the same ESC that’s in the Impluse 32?
Ya man
What’s your gps?
DYNIMITE GPS
www.avantlink.com/click.php?tt=cl&merchant_id=953aec29-878e-4306-b620-2df85883455e&website_id=70256520-69d3-496b-a06d-cfbf9af7a81d&url=https%3A%2F%2Fwww.horizonhobby.com%2Fhttps%3A%2F%2Fwww.horizonhobby.com%2Fproduct%2Fpassport-gps-speed-meter-2.0%2FDYN4403.html
I got 66mph on 4s 150a flycolor 442 prop 3660 rocket 3250kv!!!!
Check it out it will help you out with your battery charging
Its small but fast
do the math : 2200 x 3.7 x 3 = 24,420 rpms. 2200 x 3.7 x 4 =32, 560 rpms , which is closer to 29000 rpms which is ideal for rc boats !
Thats right. Plus it's a lighter set up with the 2200 4s. Opposed to 8000 100c 3s lots of extra weight with full size 3s, better speed with 4s 2200 lite setup
Mah and c. basically higher mah/c rating heavier battery. Low mah/c rating lite battery. A Boat will most likely get better performance with a lighter setup. I'm was Trying to show the difference between heavy set up high voltage(5000 50c & up heavy) & same voltage lite battery (4000 30c lighter battery) weight plays a big role in a boats performance. I tried 😪
@@nageltermin725 OH the title mentioned upgrade to a 2200kv motor, if the actual rating is 2000kv so be it use that number and the rpms is way to low using 3s battery. give it a try and see what happens, I like to see all the testing, it helps me out too. good luck 👍
You grab that timer and we don't get to see what the numbers are and you just shove it right back in there will be no come on dude
I think volantex atomic is better than this.
Yea sir the volantex is a. Nice ride
Nice vid btw. Keep it mate 🙂