So would this same effect work if you wanted to just make the penguin transparent? Or, in my case, the screens on a stack of old CRT TVs. I have a 2 minute, still frame video loop, and my plan is to use that loop as a livestream overlay. I just need all the screens to be transparent.
Yeah, but you would need to remove the screen from the original video with content aware fill. Or just place the TV over other background and reduce its opacity
Cool stuff man, but how can you save the moving image by itself with a transparent background? I have supposedly saved it but when I import it into my Premier Pro project it still has a black background. If you can advise me it would be greatly appreciated. Thanks in advance!
You are probably making a mistake along the way, because if you've traced the subject like shown, that will always remove a background back in the composition view
Depends on the file format, quicktime will be huge in terms of file size, mp4 should be fine, you could add a green solid layer as a background render it as mp4 and remove the green when needed
Yeah, under the preview screen there are buttons that add the selection visualization, there is one for the purple outline, then there's red highlight and more, click the buttons to select the desired one
Hello my brother i already render it in a way how you do in this video. How can i add new background on this set up can you help on this? Thank you so much in advance!
You can add a new background as the bottom layer after removing the background or render it transparent as .mov format and then add background in future
All samples on these YT videos are from a single subject with a very high resolution video …I have a 1k res video with 3 subjects playing instruments so far all packages I tried Fail some get maybe 80% but not there yet
hey is it normal if i render a 20 seconds footage with only the rotobrush effect that it takes 1h? Specs: 32gb ram 3060ti i7 10th gen h264 4k best settings 60fps graphics card updated and gpu acceleration activated I somehow cant figure out the problem oor... maybe its normal for 4k footage? What do you think about this problem?
Well, if it's only rotobrush effect being rendered it sounds like a lot, even for 4k footage, if you have other effects on top of that then maybe. I have similar spec PC with the exception of Ryzen cpu and the renders were never that long.
You can duplicate the original footage and leave at the bottom and reduce its opacity, then have a rotobrushed layer on top without background with full opacity, hopefully that makes sense😁
@@SmertimbaGraphics it kind of does much i might need a step by step detail if you can, i’m really new to it and im not sure about a lot of things on it
After you do the rotobrush onto a layer and the background is gone and all, duplicate the layer by selecting it go up to layer, duplicate. Then remove the rotobrush effect from the layer that's at the bottom on the timeline, that will bring back the background, then select the bottom layer and press T, then adjust opacity, you can also add more effects, like gaussian blur if you need to slightly blur the background and stuff.
@@SmertimbaGraphics no I don't think I did, how do I do that. I double click which select the outside of the video then when i draw in side nothing happens.I do ae on a laptop so is that the problem?
once i made a general selection, it doesn't let me correct it frame by frame, it just doesn't want to select more space, can somebody help w this problem?
That's because you export it as mp4, do quicktime with alpha channel included. Here's the tutorial on how to: th-cam.com/video/GkSSOGz6eaE/w-d-xo.htmlsi=2-8u839AitOqqVAo
Does not work. When I use the roto brush on a moving person, the roto brush is so dumb that it kept deleting spots of that person making him look like he got blown up by a bomb. The roto brush also can't even differentiate a black shadow and the tan skin of a person. And when I accidentally clicked the red roto brush on a random of the already-removed background, the whole arm of that person literally disappeared even though the background is black while the hand is literally tan. Roto brush AI is so stupid.
man i hate adobe so much - to follow a two minute tutorial you need at least an hour and your chance of following it 100% is really, really low. How could they manage making software so terrible to play with for all this time. this tutorial is good though
MAY YOUR PILLOW ALWAYS COLD ON BOTH SIDE BROTHER
Thank you😂
By far the best compliment I've ever seen. stealing this.
I'm so glad I got After Effects, if I tried to do this on Sony Vegas with a 6 second clip it would take me an hour.
After Effects the GOAT
Thank u bro im learning how to edit music videos and this channel has been gold god bless
I'm happy to hear that, enjoy the editing ✌️
I finally found someone who did what I exactly want🙂
Hi i'm doing this but i get stuck in a few seconds loop and it only renders the few seconds and not the other 25 seconds on the video
Check if there is a work area end point set on the video and remove it or move further
@@SmertimbaGraphics how does 1 remove that?
There are brackets like indicators on the timeline, shortcut is O key to set an end point, I for start
So would this same effect work if you wanted to just make the penguin transparent? Or, in my case, the screens on a stack of old CRT TVs.
I have a 2 minute, still frame video loop, and my plan is to use that loop as a livestream overlay. I just need all the screens to be transparent.
Yeah, but you would need to remove the screen from the original video with content aware fill. Or just place the TV over other background and reduce its opacity
@@SmertimbaGraphics THANKS!!! Bout to try this out now.
Cool stuff man, but how can you save the moving image by itself with a transparent background? I have supposedly saved it but when I import it into my Premier Pro project it still has a black background. If you can advise me it would be greatly appreciated. Thanks in advance!
Here is a quick video about that: th-cam.com/video/GkSSOGz6eaE/w-d-xo.htmlsi=8LhdLYBBZQsCw1JY
@@SmertimbaGraphics Thank you!
Thanks, man, you are my saviour. I thought i need to do it manually by adding mask 😭
Glad I could help😁
Way to blast through it ~~> Very succinct !
Thanks for this detail, very helpful. Including the effects overview to enhance. Thx!
Enjoy ♥️
10/10 short tutorial that helps so much!!!!
Great to hear♥️✌️
best tutor for After Effects and Premiere
Appreciate the feedback! 🙏♥️
I loved it! Thanks for the tutorial :)
Great to hear, enjoy ✌️
the rotoscope worked tracking my subject but when i move back to the composition the background isn't gone :( this doesn't work
You are probably making a mistake along the way, because if you've traced the subject like shown, that will always remove a background back in the composition view
You're a lifesaver!!
have you done this with a long video? I'm doing it for a 5 minute video and the file sizes have been absolutely massive...
I'm talking 18,500 frames of HD footage lol
Depends on the file format, quicktime will be huge in terms of file size, mp4 should be fine, you could add a green solid layer as a background render it as mp4 and remove the green when needed
@@SmertimbaGraphics I just exported it, it's a mov and is 6GB so fairly chunky. That's really smart about the green BG I might try it! Thanks dude
Gracias!
When I draw over the object with the green brush it doesn’t show the violet selection…can I fix it somehow?
Yeah, under the preview screen there are buttons that add the selection visualization, there is one for the purple outline, then there's red highlight and more, click the buttons to select the desired one
Amazing! Thank you
Hello my brother i already render it in a way how you do in this video. How can i add new background on this set up can you help on this? Thank you so much in advance!
i already did the way you do in this video but i add new background video it didnt worked on premiere pro and capcut
You can add a new background as the bottom layer after removing the background or render it transparent as .mov format and then add background in future
So I took out the black background...now I have a green background haha. How do I remove it in After effects? Thank you btw.
It depends on what kind of green background it is, here's a quick video on how to: th-cam.com/video/h6Kth7Iisig/w-d-xo.html
@@SmertimbaGraphics that worked! Thank you!
Very helpful thanks❤
You're welcome 😊
Short and sweet, thanks!
You're welcome!
Thank you.
Welcome♥️
I couldn't find rotobrush icon on the top... Please help how to find and insert rotobrush icon?
What version of ae do you use?
@@SmertimbaGraphics I use premiere pro 2022
@@Jaguar10My This tutorial is for Adobe After Effects :).
All samples on these YT videos are from a single subject with a very high resolution video …I have a 1k res video with 3 subjects playing instruments so far all packages I tried Fail some get maybe 80% but not there yet
Higher resolution makes rotoscoping easier no doubt, still rotobrush 3.0 is a huge improvement over the previous versions
hello
is it possible to invert the selection? and how so?
thank you for the video~
Sure, in effect controls there's a checkbox that says invert selection
Which version You use?
Latest at the time, 24.5 now
THANKS SIR ❤ YOU ARE GREAT
Appreciate it, thanks for watching! 😊
bro casually just saved my life
No problem😁😁
@@SmertimbaGraphics yay
Hey! this is simillar to key light or what can you tell ? i got videos with green screen
For green screen you just key out the green, no need to mask and rotoscope
Thats what o thought Thank you 4 quick respand I give a sub. ;)@@SmertimbaGraphics
hey is it normal if i render a 20 seconds footage with only the rotobrush effect that it takes 1h?
Specs:
32gb ram
3060ti
i7 10th gen
h264
4k
best settings
60fps
graphics card updated and gpu acceleration activated
I somehow cant figure out the problem oor... maybe its normal for 4k footage? What do you think about this problem?
Sounds like too much, what's the bitrate?
@@SmertimbaGraphics 15mb
Well, if it's only rotobrush effect being rendered it sounds like a lot, even for 4k footage, if you have other effects on top of that then maybe. I have similar spec PC with the exception of Ryzen cpu and the renders were never that long.
@@SmertimbaGraphics ah crazy I definitely need to find out what it is, thanks a bunch for your answer and nice video!
Thank you
THANKS!
Welcome!
if I were to cut the clip and make it shorter, how do I make it to where it doesn't cut the entire clip?
You can split the layer (ctrl shift D shortcut) if that is what you mean
Is there a way I can dim the background instead of removing it? Thanks♥
You can duplicate the original footage and leave at the bottom and reduce its opacity, then have a rotobrushed layer on top without background with full opacity, hopefully that makes sense😁
@@SmertimbaGraphics it kind of does much i might need a step by step detail if you can, i’m really new to it and im not sure about a lot of things on it
After you do the rotobrush onto a layer and the background is gone and all, duplicate the layer by selecting it go up to layer, duplicate. Then remove the rotobrush effect from the layer that's at the bottom on the timeline, that will bring back the background, then select the bottom layer and press T, then adjust opacity, you can also add more effects, like gaussian blur if you need to slightly blur the background and stuff.
@@SmertimbaGraphics how do you dupe it?
@@SmertimbaGraphics ohh wait I see what you mean now, thanks! 🙂
Thank you! I'm so late to know this lol
Welcome 😁
Hi, good tutorial. But i dont know why, when i have rendered, the outcome is weird?
What kind of weird?
@@SmertimbaGraphics i dmed you on instagram on the situation.
how to save a video after i cut the background???
You can save it with a transparent background by rendering as quicktime format animation preset with alpha channel included
helpful thanks
You're welcome!
thanks bro
Welcome
BLESS U
Likewise
You are savior
Ayy, happy to be😁❤️
when i try drawing in the green pen in my roblox avatar its isnt selecting anything is there anything I can do?
Did you double click to open the layer in a separate window?
@@SmertimbaGraphics no I don't think I did, how do I do that. I double click which select the outside of the video then when i draw in side nothing happens.I do ae on a laptop so is that the problem?
@@itzliaaytyou got any solutions?
@@SmertimbaGraphicssame problem
@@ashish.video11 no i just quit the edit!😂
once i made a general selection, it doesn't let me correct it frame by frame, it just doesn't want to select more space, can somebody help w this problem?
Did you cache the frames before making adjustments?
@@SmertimbaGraphics I indeed had to have the same frame rate for it to be able to work, now it works !
I love how I got an adobe advertisement after just watching this
Lol no way😂
bro mine is not being exported with the removed part
Did you render the whole timeline?
Why i export it to premium pro not work sir
What do you mean?
What is the name of this program?
Adobe after effects
but when i dwonlod it is black in the background
That's because you export it as mp4, do quicktime with alpha channel included. Here's the tutorial on how to: th-cam.com/video/GkSSOGz6eaE/w-d-xo.htmlsi=2-8u839AitOqqVAo
@@SmertimbaGraphics I want that in mp4 unable to acheive that in mp4 after converting it to MOV
I LOVE YOU
Does not work. When I use the roto brush on a moving person, the roto brush is so dumb that it kept deleting spots of that person making him look like he got blown up by a bomb. The roto brush also can't even differentiate a black shadow and the tan skin of a person. And when I accidentally clicked the red roto brush on a random of the already-removed background, the whole arm of that person literally disappeared even though the background is black while the hand is literally tan. Roto brush AI is so stupid.
It will get better as the time goes, but this is the best we got as of today😁
i am unable to find the roto brush :(
What version of after effects are you using?
@@SmertimbaGraphics the latest version
@zombiegamingk4635 hmm, you are not using premiere pro instead by any chance? Because the rotobrush is on the tools bar in after effects
@@SmertimbaGraphics oo no... Looks like I did a mistake 💀
Well time to run back !! 💀
man i hate adobe so much - to follow a two minute tutorial you need at least an hour and your chance of following it 100% is really, really low. How could they manage making software so terrible to play with for all this time. this tutorial is good though
W
NOBODY EXPLAINED TO ME THE FREEZE BUTTON!!!! I WAS TIRED OF THE THING RENDERING AGAIN AND AGAIN!!! yes, I was yelling, thank you
I know that feeling😂
when i’m painting the character it’s painting the whole screen
What brush size are you using?
Speak slower, guy! I'm from Argentina and I don't speak fluent English... Do you understand? | Deborah
I apologize 😁
@@SmertimbaGraphics 𝗚𝗢𝗗 bless you and your whole house!!!
Thanks, likewise ♥️
Bro you are legend, so easy to understand 🔥🫡
Glad to hear that♥️
Thank you
Welcome♥️