Classic Mini Head Gasket Change & Cylinder Head Refurb
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- After struggling through a few MOT emissions tests and putting up with a smokey inefficient exhaust, I thought I would change valve guides with ones that wouldn't allow oil to be let through and burned. This video is the raw footage of that work. Taking the head off, stripping and rebuilding the head, then finally putting it back together again. The following day it passed its emissions test with 2.4% CO (Max 3.5) and 24 Hydrocarbons (Max 1200!) whereas previous years it would of failed. Not to mention its much faster and picks up really well.
Just about the best head strip video I've come across on TH-cam for the Mini! No fluff and long discussions, just right to the point and showing the needed details.
I'm about to get my first classic mini ('91 Japanese Domestic Market type)...same colours as yours.
Fantastic, uninterrupted video. The perfect guide. This is genuinely, the best DIY video I've seen on TH-cam and the only one I've watched all the way through. I'm now going to change my head gasket with confidence
Number 4 sparkplug and cylinder etc is at the back of the engine (clutch end), Just saying so you don't confuse yourself!
Love your videos Adam , very entertaining , can't wait for you start the body work vids again . One thing I noticed though when you numbered the plug leads up they were back to front , number one cylinder is at the water pump end , which might confuse you if you ever have to do any ignition timing work.
Great video. Using all the different camera angles make it so easy to understand what you are doing. Ta muchly.
Thank you, glad you liked it!
A really nice video. Getting stuck in to the oily bits rather than talking about it. It takes a lot of patience to set up all the different camera angles while trying to work. I think it helps to make one more methodical about the whole job though. Definitely worth it.
Thank you very much! Yes it was time consuming as well. I did miss a few shots here and there (especially when putting all the ancillary stuff back on) but I tried to make it as clear as possible!
Your videos are ace I keep rewatching your body work are you a mechanic y trade wondering if you were. Have you looked at polishing the head that would be an excellent video thanks keep up the good work
Thanks Tony. I'm not a mechanic, just self taught alongside friends involved in motorsport over 20 years. I filmed the rebuild of that engine but haven't made the videos. Will do soon.
My current mini is in fairly good shape body wise, at least by mini standards, but even then I know I'll want to tackle some repairs like this myself one day. Most of the used mini's here in Canada are from 79 and earlier and most are as gone as yours so it's really cool seeing essentially what I'll be doing in a couple years when I can wrangle a used Canadian one being done as a guide almost online.
The video quality is awesome, can't wait to keep following and seeing the project when it's all done!
Thank you for the time in doing this... it is helping me tremendously... .
Another brilliant video Adam .
Thanks Peter!
bravo, i will do coming soon
How did you do the valve guides????
How long did it take to rnr headgakwt change ? Asuming the head is good just a basic swap of gasket , torque and valve adjustment ?
even though it's smokey I really want one. Great work you did on it. Love the video.
get a magnet on a stick for the valve collets
I'm still debating if I should get a classic mini for my first car. I like your video's though
Thom Meerhof i almost got one but its hard to find a automatic. Ended up with a smart car.
Yeah I would recommend it. I did and its great if you like cars and working on them. There is a lot you have to put up with, but its worth it in the long run!
Adam White when will you be uploading more videos on the mini restoration
Hi Martin, most likely within the next month I hope. But once it gets going again new episodes will come thick and fast!
Adam White brilliant been loving watching reminding me of my old mini
Nice Video Mr Adam White
I'll never seen anyone done such a good head fix on a mini on TH-cam ever!! It's a big help for me who have to do it on mine to. Was the symtom a two-stroke cloud on yours to?
Because mine burns incredibly much oil and I hope it is the valves and not the piston rings...
Thank you Jonathan! Yeah it was pretty smokey but only on start up. It would then clear once it was all warmed up. Hence why I changed the valve guides. If it is smokey all of the time that could mean piston rings. Fingers crossed it isn't that!
Great video! It must've taken ages setting up all those shots and it came out great.
What was the [glue?] you used on the head gasket? Love the channel, keep it up!
Haha yes it did take a while! Its called Wellseal. Its not always used on cylinder heads but its always a safe bet by just putting a thin layer either side of the gasket. It also never fully dries unlike most alternatives, which is a plus!
Adam White I bet! Ok cool I've had a few HG go between 2-3 so not sure if it would be good to use there or not.
Ah yeah. That is a common place. Id advise using the Wellseal. Its done the job well on other cars as well!
Adam White hi, I uploaded a new mini video today, I'd love it if you would check it out, it's a bit long because I'm not that great at editing! But any comments would be great!
Hi Matt, just had a watch it was really good! Nice to see its not just me that breaks welders. Its interesting that you use Co2. I use Argon 5 and give really good welds. Price is £60 deposit and like £50 refill so its not terrible! But keep going with the project its looking great! :D
I'd never remember how to put it all back together again!
@13:10 what are you putting on the headgasket ?
What cam are your running?
Nice work.
Mad vid!!
I am so prised that the valves didn’t have double springs
Love the videos, Adam. Those pistons look kinda bad though ...
Thanks! Yeah, I think its due to the leaky valve guides causing it to run rich (with oil), hence the smoke and build up. No way of cleaning them up where they are without taking them fully out. Im hopeful they'll clean a bit now all those problems I talked about are fixed.
Video 22? Video 22 ?? The color of the car is different-what happened Video 22? ? What's wrong with the color of the car
I didn't load the Yamaha motorcycle engine What a no registration
De carbon those pistons!!
Id love a mini for my first car but you have to be 25 here to get insurance for them as their to old 😡
While its off give it a port job: th-cam.com/video/-IqlB3ZIl3U/w-d-xo.html
No more smoke for people to complain about now!!
Yay!!! :D
ceberia dedicarse a otra cosa. es un desastre el trabajo que hizo. no hizo el plano de la tapa- no cambio las guias de valvulas que se nota estatan gastadas. no cambio la junta de tapa... la verdad por que no lo lleva a un mecanico. ni siquiera sabe usar las herramientas. ej. la llave crique no se usa para aflojar(asi se rompe) malisimo..
your a bad mechanic bro leave it to the shops
jesus mendez
*you’re
A fucking spastic