The WOT Box is the truth for no-lift shifting! Just be aware guys if you are using it for launch control, make SURE your timing system can take it. For example, on my 2011 GT500 I needed to upgrade my Lower crank gear, Oil Pump gears, secondary chains, chain guides (to billet) and most importantly upgrade the primary chain tensioner pivot pins IF you have an aluminum block with 6mm bolt in pins. A 2-step is extremely rough on timing components, and can lead to a blown motor if your's isnt up to snuff. Cover your ass and once you start using a 2-step your consistency will increase.
You should be custom tuned for the heads and cams to begin with. Then when adding the WOT box there may be some tuning required to prevent a misfire code from coming up. That's something you'll want to discuss with your tuner though.
Does the WOTBOX boost in launch control ??? I have a 135i n55 DCT with a 7670 borgwarner turbo, and my problem is to boost in launch control because of the Lag. Thanks for the information you can bring me
Would this set a new rev limiter as well? Like if I’m driving and just taching out, would the box set the limiter? Or does this only mess with launch control and allow the nls?
This doesn't set a new limiter. The limiter is set in the calibration. This box will allow you to control what rpm you want it to launch at though and allows the NLS feature. Let us know if you have any other questions.
anyone help me on the connecting of the wot box and pc. I have computer program and updated to latest version but won't let me read write or use the com port, only auto
Likely would, it just cuts ignition. The real question is whether you can find the wiring instructions so you aren't looking up the pinouts of ECM and other things. On N2MB's site I only see Mustangs listed under ford for wiring. Either way it shouldn't be too difficult.
I got a 07 Mitsubishi Eclipse GT 3.8L V6. I put a Cold air intake on and cut the cats off but left the resonator on. Will this damage my car in anyway if I install it correctly? Is this product available for a 4th GEN eclipse GT? Thanks
You do not need to be forced induction for this box to work on your vehicle. It works the same way for naturally aspirated cars. Please let us know if you have any other questions.
This can be used on an automatic. You would use the brake pedal switch to active the box instead of the clutch when setting it up on a manual car. WOT boxes work on all cars except the mini cooper. So it's compatible with all other engines but that.
That depends on if you know how to powershift or not. If done properly it really won't affect anything negatively. If you miss the gear or force the shift into a gear you definitely risk damaging the clutch fork, syncros or the transmission as a whole.
I have a stage 1 tune on my 8p s3 but my box code does not support this feature. By adding this n2mb to my current setup. I guess I shouldn't have any issues. Does it come with installation instructions?
My lightly modified 08 Mazdaspeed 3 has a custom tune via my Cobb Access Port that my tuning shop also added launch control and flat foot shifting. would i not need this or would this offer other features and benefits over my tuned-in LC & FFS? Thanks.
You would set the WOT box signal off of the brake pedal switch. Then set the rpm on the WOT box to whatever RPM you like. That will vary depending on the stall speed your converter is as well as where you'd like to launch it.
Audi man Videos from our understanding the WOT box will work on any automobile except for the Mini Cooper. Let us know if you have any other questions. Thanks!
Lethal Performance Good day Lethal I did some research and not sure if it’s true but I heard it will not work well with Audi A7. It will throw it in limp mode ? Any help would be great 🙏🏻
Question, so I have a 350z it’s fully straight piped , no muffler , no resonator, test pipes , I want to have loud pops and bangs that’s all, so will this work on my car ?
The WOT Box is the truth for no-lift shifting! Just be aware guys if you are using it for launch control, make SURE your timing system can take it. For example, on my 2011 GT500 I needed to upgrade my Lower crank gear, Oil Pump gears, secondary chains, chain guides (to billet) and most importantly upgrade the primary chain tensioner pivot pins IF you have an aluminum block with 6mm bolt in pins. A 2-step is extremely rough on timing components, and can lead to a blown motor if your's isnt up to snuff. Cover your ass and once you start using a 2-step your consistency will increase.
Good advice man!
@@StickShiftOnly13 yep mines a 2019 fbo e85
I'll just keep risking it on my stock internal 2v lol
That video was awesome Jared. Good product info. Sounded like 1 take...
"One" take lol
Would this work on my toyota Prius ? it's stock but I did Just recently upgrade my floor mats.
IF you only use the no lift shift feature of the N2MB to assist with shifts will there still be chain stretch or damage?
If you're gonna build the engine at some point anyway, what does it matter?
@Christopher Brooke I have the HD secondary chains and upgraded PAC springs. Will that be okay?
If I put a wot box on a Honda or Toyota, will it go "Ping Pang Ping Pang Ping Pang" ...I'm asking for a friend
No WOT Box needed for that....
Do you have to get retuned after install if you have heads and cam
You should be custom tuned for the heads and cams to begin with. Then when adding the WOT box there may be some tuning required to prevent a misfire code from coming up. That's something you'll want to discuss with your tuner though.
@@Lethalcamp yes it’s tuned just asking thanks I will reach out to them before ordering
Kool, I need that A10 drive shaft.
Nickel white S550 we’ve got em in stock. Give us a call when you’re ready brother. 👊
Why does the the WOTBOX have to use Mazda settings instead of Ford CKP on the 2018+ coyotes?
What is the black button for on the wotbox?
It allows you to go through the options and adjust the boxes settings.
Does the WOTBOX boost in launch control ??? I have a 135i n55 DCT with a 7670 borgwarner turbo, and my problem is to boost in launch control because of the Lag.
Thanks for the information you can bring me
hey man i have a 2011 c6 corvette GS can you explain how i can use this on a automatic?
Can i use the wot box to make a hard cut rev limiter ?
You forgot to talk about timing chain stretch/ breakage.
How difficult is it to use this to control a magnus clutch valve?
Would this set a new rev limiter as well? Like if I’m driving and just taching out, would the box set the limiter? Or does this only mess with launch control and allow the nls?
This doesn't set a new limiter. The limiter is set in the calibration. This box will allow you to control what rpm you want it to launch at though and allows the NLS feature. Let us know if you have any other questions.
Where’s one for 2014 3.5L or does it not mattrr
Can I use this just for the no lift shifting and not the 2step part? Will it work without issues on a t56 Magnum xl swapped 19' gt350?
Would this work for a 2004 mustang gt, automatic
Indeed it will. You'll use the brake pedal switch to trigger the device instead of the clutch pedal for manual vehicles.
@@Lethalcamp thank you very much
anyone help me on the connecting of the wot box and pc.
I have computer program and updated to latest version but won't let me read write or use the com port, only auto
Will this work on any rig? Looking for launch control for my F150 eco.
Likely would, it just cuts ignition. The real question is whether you can find the wiring instructions so you aren't looking up the pinouts of ECM and other things. On N2MB's site I only see Mustangs listed under ford for wiring. Either way it shouldn't be too difficult.
Have you had any experience with their window switch add-on for nitrous?
I got a 07 Mitsubishi Eclipse GT 3.8L V6. I put a Cold air intake on and cut the cats off but left the resonator on. Will this damage my car in anyway if I install it correctly? Is this product available for a 4th GEN eclipse GT? Thanks
He said automatic? So I could put this in my automatic and still get that crazy pop from the rev-limiter or what??
I'm trying to figure out the same thing lol
Yes, that is correct
Depends if you have pedal shifters i think
I have paddle shifters in my mustang and I still can’t seem to activate 2step/launch control
@saint198 yes you can put it to am input like a steering wheel mount button or to the brake pedal switch. It's not difficult to install
What computer does it use? I’d it hp tuners? And will it work on a 2015 v6 camaro?
Could this be setup for rolling antilag with a momentary switch?
Does it work on the 4.6L 2V?
Yeah
Would this work on a 2007 hyundai accent sr? asking for a friend...
Please please put one into my new 10 speed mustang 2020
My BMW E39 dose't have the clutch switch on clutch pedal. So where can I put the green wire from wot box?
E brake switch
Do you need to be boosted for the WOT box?
You do not need to be forced induction for this box to work on your vehicle. It works the same way for naturally aspirated cars. Please let us know if you have any other questions.
I have a 2017 s550 GT automatic will it work
Indeed it will. You'll use the brake pedal switch instead of the clutch pedal switch to engage the 2 step.
Does this work for a 95 mustang GT? I noticed most of them say only to 96.
soo i have 2 questions :
1 : can this be used on an automatic car
2: does this work on a TDI engine ( diesel in other words )
This can be used on an automatic. You would use the brake pedal switch to active the box instead of the clutch when setting it up on a manual car. WOT boxes work on all cars except the mini cooper. So it's compatible with all other engines but that.
@@Lethalcamp thank you for the answer
@@Lethalcamphow do I program for a ford mustang ecoboost automatic? I’m holding the brake and mashing the gas but still isn’t doing 2-step
is no lift shifting bad for transmission ?
That depends on if you know how to powershift or not. If done properly it really won't affect anything negatively. If you miss the gear or force the shift into a gear you definitely risk damaging the clutch fork, syncros or the transmission as a whole.
Any change yall have this for a 2001 f150 4.2
Will it work on a 3 cylinder car?
I have a stage 1 tune on my 8p s3 but my box code does not support this feature. By adding this n2mb to my current setup. I guess I shouldn't have any issues. Does it come with installation instructions?
Dave, it does not have instructions in the box BUT they are on the N2MB website: www.npcompleteperformance.com/wotbox/instructions
Where can I get the cable that run from wot box to computer
Can I use my clutch starter switch with this or do I have to buy the special clutch switch
It doesn't care which you use. A good rule would be that if it has cruise control, it likely has a usable clutch switch.
are these universal?
Yes they are. I believe the only car that they don't work on are Mini Coopers.
Got one for my 02 GT, I try not to use 2 step because I am worried about my timing components, 0 clue if they’re tough enough for it
How do you actually use the 2 step I have installed
Yeah we don't have the strongest timing components lol. Plastic chain guides
My lightly modified 08 Mazdaspeed 3 has a custom tune via my Cobb Access Port that my tuning shop also added launch control and flat foot shifting. would i not need this or would this offer other features and benefits over my tuned-in LC & FFS? Thanks.
Your tune is probably the safest bet. The tuners can make it a little safer then what this does/can
How would u launch an automatic
You would set the WOT box signal off of the brake pedal switch. Then set the rpm on the WOT box to whatever RPM you like. That will vary depending on the stall speed your converter is as well as where you'd like to launch it.
@@Lethalcamp so i have to drop it from N > D ? or does the 2step function works on Drive?
@@tegogolo3 It works in D as it uses the brake pedal switch to activate/deactivate the 2 step.
@@Lethalcampdo you have a video of the installation and software for automatic cars.
Would it work for a fusion 2.0 eco boost since it’s the same engine as the focus st cause the website doesn’t show it
The WOT boxes work on pretty much anything but a mini cooper. Feel free to give us a call if you have any other questions.
@@Lethalcamp would the wiring be the same since it pretty much the same
Can I turn off the no lift shift and only spit flames?
Hi bby
Can put it into a Audi A7 ?
She doesn’t have launch control
Audi man Videos from our understanding the WOT box will work on any automobile except for the Mini Cooper. Let us know if you have any other questions. Thanks!
Lethal Performance
Good day Lethal I did some research and not sure if it’s true but I heard it will not work well with Audi A7. It will throw it in limp mode ?
Any help would be great 🙏🏻
Does the no lift shift feature pop/ sputter between shifts like the zr1 does?
Does it work on a mustang ecoboost
Indeed it does. We used it on our 2015 Ecoboost mustang when it went low 11's.
@@Lethalcampa automatic ecoboost or manual?
Will this work on a 2015 Chrysler 300S V6?? I want the popping sound lol!!!
Cool
Will this work with the corsa extreme exhaust setup?
You’re a 🤡
The sound isnt like papappapapapa. Its more like ruumm ruumm ruumm
LOL!
@@Lethalcamp lol back
alot of tech tips🙄
Question, so I have a 350z it’s fully straight piped , no muffler , no resonator, test pipes , I want to have loud pops and bangs that’s all, so will this work on my car ?