You guys need to make a light kit for every Rc unit as a person is out at dusk or even night and it’s disappointing when your not able to see your unit and yes there’s other ways to put lights on your Rc’s but it’s usually not as clean nor does everything fit where it’s supposed too, but please consider making light kits for all models from 1/10 and up. Thanks and Keep up the Great Work !! 👊👍
@Stack I was literally thinking the same thing. This video is old, however I 100% agree. I am and always will be Nitro. I have bought Amazon lights. They work great. But nowhere near as great as this setup, customization, or neatness. And requires some knowledge to setup correctly and without proper tools, it can look rough. It CAN be done, but why should I have to? Traxxas should get back into other models besides the focus of their "hobby" R/C's.
Now, just to jet the installation kits in stock! Next add a pigtail for trailers lights and a seperate universal trailer light kit. After all you have to get your buggy or boat transported somehow!
It would be super helpful if you made a video about how to use the Link app to control and customize the lights operation for this kit. It looks to me with my install that you can only have 4 toggle items on the screen and I can't see an option to turn them on and off. I also asked via the chat function on the website about how to power a led bumper light bar with high / low function and was only sent the PDF instructions for the Pro Light kit that tells you to use the support options on the site that don't have any information about doing this....please help Also, no where in the video does it mention the 1-12 slots on the vehicle mounted block. It references to the AUX ports but not the other 1-12 strip. What are those for?
Can you turn on and off hazard signal with the app? Its so impractical to always remove the body before I can turn it on and off by using the buttons on the module.
I have the TRX4 Defender and I can't get my turn signals to work but in your ad it says it works. Does it or doesn't it? The hazard lights work fine though...
hello Traxxas and sorry for bothering you but ... i don't get the brake lights to work. i mean they light up, but don't change brightness when applying brake. they stay the same. i think everything else works as intended... maybe it's just a setting i missed? do driving modes on the XL5HV matter? any help would be much appreciated EDIT: FOUND MY MISTAKE!!! forgot to use the small green jumper on E... complete ProScale Advanced Lighting Control System for trx4 sport (8085X) plus RockLights (8026X). chassis is from a bronco, with TQi remote/receiver + Link module, 2speed, difflocks and inner fenders (swapped my bronco body for a friends sport)
@@gasolinediesel972 ...so everything up until 3:20, where the functions shown after 3:20 require the Bluetooth-equipped Rx is required. That’s my understanding from the video, anyhow.
I'm thinking the same thing I gave a HW Axe combo ready to fit but I'm pretty sure I will lose turn signals, reverse lights and brake lights. Have you found any way around this yet?
Hey traxxas, how do I get back the hazard, turning and brake lights to work? I messed around with the traxxas link app, and since then I can switch on High and low beam and the reverse lights are working. At some point I pressed and hold the mode button for 5 seconds and a fancy disco light sequence started but I still have no turning, hazard and brake lights. What can I do now?
too bad you can't turn on and off light from regular transmitter. video shows you need the wireless module and then operate if from you your droid or IOS device.
I know !!! It's ridiculous that you need a wireless device to operate your lights, why make the simple things more difficult. A simple on off button from your transmitter would have been a lot easier. I'm disappointed with this, especially for the money paid. My trick RC lighting system works a lot better and for less money, I wish I would have went that route instead.
Yes and no. Full LED kit (Traxxas 8030) is NOT compatible with pro scale lights. For TRX4 it includes additional amber, fog and reverse light. Source: official Traxxas site, pro scale lighting mogule, small print at the very bottom. Also official guide for this system confirms it.
Works woth brushless. I have it on a 4tec 2.0 with the 3s Venilion setup . The maxx link cable covers the reverse functions instead of the motpr wire. Good luck figuring out what style connectors traxxas used on the distribution block. I had to use a bunch of female servo ends, shrink wrap them all for no shorts. Would work with a different motor but I don't think it would work with a non traxxas ESC.
Actually I have to take back a little of my praise in my earlier comment. Before making the Defender "Pro Scale" light kit I wish Traxxas had bothered to do a "Google images" of a Defender before they started making the set! The front indicators/turn signals should be on the bottom, and should not illuminate when the driving lights are on.
With the lights, it's easy to see the rc, it's the things like trees and other stuff that you can't see is the problem. Those lights don't look bright enough to do any good at night.
Hazard Signals... YES! Turn signals...well, not so much: nobody likes the driver that signals after they start their turn. Put the turn signals on a three-position switch, TRAXXAS, please (thank you for the disable switch!). Also, TAKE MY MONEY! 🤪
WOW! Traxxas is killing it! Well done!
I never bought the first light kit as it was very disappointing... this is the real deal, good stuff!
Nothing better than mud running at night and these lights look amazing. Great for those of us who can’t stop taking pics and videos of our rigs.
This is unbelievable! Well done Traxxas! 👍
Very good video! Very detailed
You guys need to make a light kit for every Rc unit as a person is out at dusk or even night and it’s disappointing when your not able to see your unit and yes there’s other ways to put lights on your Rc’s but it’s usually not as clean nor does everything fit where it’s supposed too, but please consider making light kits for all models from 1/10 and up. Thanks and Keep up the Great Work !! 👊👍
@Stack I was literally thinking the same thing. This video is old, however I 100% agree. I am and always will be Nitro. I have bought Amazon lights. They work great. But nowhere near as great as this setup, customization, or neatness. And requires some knowledge to setup correctly and without proper tools, it can look rough. It CAN be done, but why should I have to? Traxxas should get back into other models besides the focus of their "hobby" R/C's.
you realize just because this says for trx-4 it doesn't mean you can't install it on other trucks
Very helpful....thanks for sharing the video
I like this lady’s narrating voice better than that other girl
He protec he attac but most importantly he bacc
he blincc
Very nice!
Knocked it out of the park again TRAXXAS!!
Traxxas blows it out of the water every time they just do things a little bit better
Thats great
Good job! I like RC
Yo I watch all your vids I was just scrolling on here and found you
Cool ! 👍😎
What type of plug does it accept? I suddenly need to buy many adapters, if they exist, for my custom light set up.
I just got this kit. Will I be able to use with the telemetry expansion pack??
Dope
Now, just to jet the installation kits in stock! Next add a pigtail for trailers lights and a seperate universal trailer light kit. After all you have to get your buggy or boat transported somehow!
Nice guy's
I just bought this system for my 72 blazer body and the rear turn signals and brake lights do not come on, it is just constant red. Any ideas?
Podíais haberlo para el traxas trx4 defender....se puede poner en el defender ? Muchas gracias
How do connect this set when you have the velineon vxl-3s esc and motor?
I picked up one for my 79 bronco but no working rear signal leds
It would be super helpful if you made a video about how to use the Link app to control and customize the lights operation for this kit. It looks to me with my install that you can only have 4 toggle items on the screen and I can't see an option to turn them on and off. I also asked via the chat function on the website about how to power a led bumper light bar with high / low function and was only sent the PDF instructions for the Pro Light kit that tells you to use the support options on the site that don't have any information about doing this....please help Also, no where in the video does it mention the 1-12 slots on the vehicle mounted block. It references to the AUX ports but not the other 1-12 strip. What are those for?
Did you ever find out what that 1-12 is?
What if I a ready have the lights system on my trx 4 bronco it will be comparable whit this new sistem??
Can you get the lighting system and put it on a different body like a proline body?
Can you turn on and off hazard signal with the app?
Its so impractical to always remove the body before I can turn it on and off by using the buttons on the module.
I have the TRX4 Defender and I can't get my turn signals to work but in your ad it says it works. Does it or doesn't it? The hazard lights work fine though...
not cheap but looks good
hello Traxxas and sorry for bothering you but ...
i don't get the brake lights to work. i mean they light up, but don't change brightness when applying brake. they stay the same. i think everything else works as intended...
maybe it's just a setting i missed? do driving modes on the XL5HV matter?
any help would be much appreciated
EDIT: FOUND MY MISTAKE!!! forgot to use the small green jumper on E...
complete ProScale Advanced Lighting Control System for trx4 sport (8085X) plus RockLights (8026X). chassis is from a bronco, with TQi remote/receiver + Link module, 2speed, difflocks and inner fenders (swapped my bronco body for a friends sport)
Does it work with Hobbywing 1080ESC/Axe Foc/Fusion? Does it work without TQI Transmitter?
Most likely would be if you used a receiver adapter. It should work without the tqi because it works with the tq.
@@gasolinediesel972 ...so everything up until 3:20, where the functions shown after 3:20 require the Bluetooth-equipped Rx is required. That’s my understanding from the video, anyhow.
A question from me. If I were to run a brushless system, where do I plug to ensure the lighting still works?
Would this work with my hobby wing esc?
so if that is powered by the one jts plug how are you suppose to connect your new winch and use this system at the same time?
the winch comes with a y-splitter so you can power both at the same time
For xmaxx to ?
Is it possible to have the back up light working if a brushless motor is installed ??
I'm thinking the same thing I gave a HW Axe combo ready to fit but I'm pretty sure I will lose turn signals, reverse lights and brake lights.
Have you found any way around this yet?
Hey traxxas, how do I get back the hazard, turning and brake lights to work? I messed around with the traxxas link app, and since then I can switch on High and low beam and the reverse lights are working. At some point I pressed and hold the mode button for 5 seconds and a fancy disco light sequence started but I still have no turning, hazard and brake lights. What can I do now?
I did this. How did you reset it? I can't figure it out
@@Sleezax Actually I have no idea how it got back to normal operation. It works since then.
@Sebastian Stange well just for everyone's knowledge. I had to reset my factory steering endpoints. In my button mashing i apparently reset that.
My turn signal dose not work, the hazard ones work but when I turn my wheels it doesn’t not blink like it should , what could be the problem?
Never mind you have to double click the signal button twice and it will flash and now when I turn they flash 😅
I wonder if this works with the new traxxes bronco
too bad you can't turn on and off light from regular transmitter. video shows you need the wireless module and then operate if from you your droid or IOS device.
I know !!! It's ridiculous that you need a wireless device to operate your lights, why make the simple things more difficult. A simple on off button from your transmitter would have been a lot easier. I'm disappointed with this, especially for the money paid. My trick RC lighting system works a lot better and for less money, I wish I would have went that route instead.
Is it available for the TRX 4 defender®??
Yes and no. Full LED kit (Traxxas 8030) is NOT compatible with pro scale lights. For TRX4 it includes additional amber, fog and reverse light. Source: official Traxxas site, pro scale lighting mogule, small print at the very bottom. Also official guide for this system confirms it.
Is it rugged and waterproof?
What part number do I need for 79 blazer pro scale advanced lighting control systems
8083x
Why no rear orange hazard lights?
Real blazer only had red
Does this work with aftermarket Brushless systems? And Transmitters?
Works woth brushless. I have it on a 4tec 2.0 with the 3s Venilion setup . The maxx link cable covers the reverse functions instead of the motpr wire. Good luck figuring out what style connectors traxxas used on the distribution block. I had to use a bunch of female servo ends, shrink wrap them all for no shorts. Would work with a different motor but I don't think it would work with a non traxxas ESC.
Will this also work for other traxxas models like the slash 4x4 vxl and the maxx?
No
Lol no
Just after i add light on mine.🤦♂️
What about a winch installation
Para el traxxas trx4 defender
Actually I have to take back a little of my praise in my earlier comment. Before making the Defender "Pro Scale" light kit I wish Traxxas had bothered to do a "Google images" of a Defender before they started making the set! The front indicators/turn signals should be on the bottom, and should not illuminate when the driving lights are on.
Looks great! Will it work with a brushless system?
yes if you solder a jts plug to your esc
What about the break lights, how do you wire them with a brushless motor?
Good question 🤔
Anybody figured this out yet?
first! but also TAKE MY MONEY!
How the hell did you comment before it got uploaded
What the hecj
Video: "uploaded 18 hours ago"
This guy's comment: "2 days ago👁👄👁"
@@CheeZyNutZ its glitch😂
Do you work with brushless ? (Velineon VXL)
I have already upgrading the engine and esc system
#traxxas support
I think they should have a system like that for all of Traxxas line up. SMH
I am not able to use my phone to control the lights. I have been trying for a day now!!!!
You got the traxxas link bro?
@@supbaby86 yes. I bought a new one and now everting is working fine. Got a bad light kit I think.
@@kristohs good to hear, got my traxxas link coming so I can do the same on my 2021 bronco.
Sad that this only exclusive to Traxxas/ you would make more money if that be UNIVERSAL any RC by default.
Brake lights and signals don't work.
Who drives Rc cars at night I’ll have to follow it by walking behind if at night cause u can’t see it
With the lights, it's easy to see the rc, it's the things like trees and other stuff that you can't see is the problem. Those lights don't look bright enough to do any good at night.
@@Blueknight1960 there’s no need for it is the day not enough for Rc that u also need night
@@rexgamerandrclover6305 I don't drive my rc at night, I was just saying the traxxas lights aren't bright enough to see at night.
@@Blueknight1960 that’s true the lights are useful only it u work the whole day and don’t hv time to drive Rc cars in morning so u drive at night
@@rexgamerandrclover6305 Rex dude crawling at night is the best 👌 act like ya know...
Hazard Signals... YES! Turn signals...well, not so much: nobody likes the driver that signals after they start their turn. Put the turn signals on a three-position switch, TRAXXAS, please (thank you for the disable switch!). Also, TAKE MY MONEY! 🤪
Tactical?????....