Hi nipi210, When we ordered this press, we asked to have it retrofitted with bare back rollers on both heads. We had a Multilith 1250 LW (Long & Wide), but getting the fountain/ink adjusted was horrific. Too much water and it would emulsify and wash out the colors and not enough, the job would tone up. In later years, I swapped out the bare back rollers on the Hamada's Main Head for a Kompac unit and never looked back. Wow, what a difference. Wish I had done it a lot sooner. ZERO issues with washout and toning. It only uses what it needs from a light text job to full coverage. The excess water not needed returns back to the nip in the rollers. And you don't have water puking down below the impression cylinder and making a mess. Definitely worth the money. I did not retrofit Head #2 as I don't use it that much and didn't want to spend the extra money, but it works well with the Kompac unit when running 2 colors at once. Hope this helps. Regards Major
@@MajorAsstard Thanks for the answer, I have in my head number 2 fabric rolls How do I make this change to exposed rubber rolls? Where can these three rolls be ordered?
@@nipi210 Hi nipi210. Try Nationwide Parts & Roller Company @ 1-800-497-2787. He has parts, rollers and just about everything you’d need to keep your Hamada humming! Good luck. :)
ব্যক্তিগত সমস্যার কারণে।.... জাপানি হামাদা- ৭৭৫ সি.ডি.এক্স (মেনুয়াল), লাল বডি, (পেটি/নতুন/প্যাকেট) প্রিন্টিং মেশিন বিক্রি হবে, মাত্র ৩ মাস মেশিন ব্যবহার করা হয়েছে (বর্তমানে ব্যবহৃত), বিশেষ সুবিধা সমূহ: ২২০ বিদ্যুৎ/ বাসার বিদ্যুতে চলবে, সম্পূর্ণ ইলেকট্রিকাল, আধুনিক ফটোসেল, ৪ কালার নিখুঁত প্রিন্ট, কালার/রেজিস্ট্রেশন মিলিয়ে প্রিন্ট করে মেশিন যাচাই করে নিবেন। মেশিনের কন্ডিশন খুব ভালো, পেপার সাইজ- ১১.৫-১৮ এবং (হামাদা ৬০০ মিনি মেশিনের) সকল প্রকার প্রিন্ট করা যাবে, প্রতি ঘণ্টায়- ৭/৮ হাজার প্রোডাকশন, মেশিনের মূল্য-২,৫০,০০০/- (দুই লক্ষ্য পঞ্চাশ হাজার) নয়াবাজার, ঢাকা-১১০০। মোবাইল- ০১৯৭৪-১৪৫৮৯৩, ০১৬৮৪-৫১৯৬৮৭,
Hi Benjamin, sorry I haven't replied sooner. Try this company for Hamada parts. They carry a sizable inventory. Best of luck! www.printersrepairparts.com
Hi Rajesh, this machine is still in use and is not for sale. New, it ran $26,000, but Hamada is out of business. There may be other brands that are similar to this press. It will run up to 11x17. Thanks for the reply!
Hello, was just showing my son this well engineered printing press and noticed your comment, I only speak English but know how to repair & certainly use several different offset printing presses and many pre dated 1980 contact me at TimWillGetItDone@gmail.com if you would like me to consult. I am semi retired and have a Love for this industry
Hello, was just showing my son this well engineered printing press and noticed your comment, I only speak English but know how to repair & certainly use several different offset printing presses and many pre dated 1980 contact me at TimWillGetItDone@gmail.com if you would like me to consult. I am semi retired and have a Love for this industry
I would like to thank hamada group for making us key of sucess
Muy Buena Maquina
Desde Lima Peru Saludos
these machines are work-horses. nice video.
Nice offset PRESS ...❤
Thank you!
hamada brand best hai ya ryobi or autoprint
according to your experiance
Hello, did you make the change of water rolls from fabric to rubber? And if so, is it more useful and easy for work?
Hi nipi210, When we ordered this press, we asked to have it retrofitted with bare back rollers on both heads. We had a Multilith 1250 LW (Long & Wide), but getting the fountain/ink adjusted was horrific. Too much water and it would emulsify and wash out the colors and not enough, the job would tone up. In later years, I swapped out the bare back rollers on the Hamada's Main Head for a Kompac unit and never looked back. Wow, what a difference. Wish I had done it a lot sooner. ZERO issues with washout and toning. It only uses what it needs from a light text job to full coverage. The excess water not needed returns back to the nip in the rollers. And you don't have water puking down below the impression cylinder and making a mess. Definitely worth the money. I did not retrofit Head #2 as I don't use it that much and didn't want to spend the extra money, but it works well with the Kompac unit when running 2 colors at once. Hope this helps. Regards Major
@@MajorAsstard Thanks for the answer, I have in my head number 2 fabric rolls How do I make this change to exposed rubber rolls? Where can these three rolls be ordered?
@@nipi210 Hi nipi210. Try Nationwide Parts & Roller Company @ 1-800-497-2787. He has parts, rollers and just about everything you’d need to keep your Hamada humming! Good luck. :)
Gostei Muito Beleza
perdon la pregunta que tipo de umectacion es el primer cabezal
Beautiful
Good
ye kitne ki he Machinery
Khalil Shaikh मशिन बेच ते हे
hi
Aap ka address batao
Good thanks
Available 9930011134
ব্যক্তিগত সমস্যার কারণে।....
জাপানি হামাদা- ৭৭৫ সি.ডি.এক্স (মেনুয়াল), লাল বডি, (পেটি/নতুন/প্যাকেট) প্রিন্টিং মেশিন বিক্রি হবে, মাত্র ৩ মাস মেশিন ব্যবহার করা হয়েছে (বর্তমানে ব্যবহৃত),
বিশেষ সুবিধা সমূহ: ২২০ বিদ্যুৎ/ বাসার বিদ্যুতে চলবে, সম্পূর্ণ ইলেকট্রিকাল, আধুনিক ফটোসেল, ৪ কালার নিখুঁত প্রিন্ট, কালার/রেজিস্ট্রেশন মিলিয়ে প্রিন্ট করে মেশিন যাচাই করে নিবেন। মেশিনের কন্ডিশন খুব ভালো, পেপার সাইজ- ১১.৫-১৮ এবং (হামাদা ৬০০ মিনি মেশিনের) সকল প্রকার প্রিন্ট করা যাবে, প্রতি ঘণ্টায়- ৭/৮ হাজার প্রোডাকশন,
মেশিনের মূল্য-২,৫০,০০০/- (দুই লক্ষ্য পঞ্চাশ হাজার)
নয়াবাজার, ঢাকা-১১০০।
মোবাইল- ০১৯৭৪-১৪৫৮৯৩, ০১৬৮৪-৫১৯৬৮৭,
Hi Benjamin, sorry I haven't replied sooner. Try this company for Hamada parts. They carry a sizable inventory. Best of luck!
www.printersrepairparts.com
What size machine
Price? ??
Give me conducte number
Hi Rajesh, this machine is still in use and is not for sale. New, it ran $26,000, but Hamada is out of business. There may be other brands that are similar to this press. It will run up to 11x17. Thanks for the reply!
Available this Machine cell 9930011134 Mumbai
Busco alguien para que me enseñe a manejar esta máquina gracias
Hello, was just showing my son this well engineered printing press and noticed your comment, I only speak English but know how to repair & certainly use several different offset printing presses and many pre dated 1980 contact me at TimWillGetItDone@gmail.com if you would like me to consult. I am semi retired and have a Love for this industry
Hello where are you?
Si quieres yo te puedo enseñar
quiero una igual alguien sabe
Hello, was just showing my son this well engineered printing press and noticed your comment, I only speak English but know how to repair & certainly use several different offset printing presses and many pre dated 1980 contact me at TimWillGetItDone@gmail.com if you would like me to consult. I am semi retired and have a Love for this industry
Parece buena la maquina