Have watched your content and enjoyed it for the last 3 years, "Use your shit and learn how to sharpen your knives" is the motto I strive for. Thank you for your work and wish you a good rest of your day.
Great video as always. I’ve watched many of your steel overview videos and they’re some of my favorites so it’s nice to see you make an updated one. Spy27 is my favorite steel right now because I’m garbage at sharpening and it is really balanced and very forgiving in terms of maintenance. Praying for you always. Have a great weekend!
Btw, that’s shady as hell that a big channel like Bestdamnedc would jack your outro phrase like that. There’s very little chance that he doesn’t know you or isn’t aware of your channel. If MarineX knows who you are and likes your content, then Bestdamnedc does as well.
I haven't had a chance to use too many different steels, butIm'm really impressed by the native 5 magnacut. And Don't let that edc infomercial steal your line. He can have his writers come up with some cheap buy now line.
Do you have any videos going through the different types of blade geometry? Like what is a hollow grind, full flat, scandi etc, ideal angles for different uses
Yaaaasss. I just looked into Larrins spreadsheets on steels, right after watching Outdoor55 destroy S7 with his heat treat. Have been wondering what makers in the modern world I could put stock in for quality heat treatments.
Mind you, I don't like (literally any, & I've looked) of Spyderco's designs. When I first got into the knife world, I ended up buying the only two Spyderco's I own, & they are both in H1, unfortunately. I had no good direction back then. 😅
I love Maxamet. It's actually one of the few steels I haven't managed to chip in use. I've chipped 10v, REX 45 and k390 but Maxamet just does not care if I hit hard stuff.
This outro phrase issue on Taylor’s channel is ridiculous and the responses that both he and Rikki gave were incredibly dismissive and disrespectful. If his statement that he didn’t steal anything is true, it would take roughly 2-3 minutes to go to this channel, play any video from the last few years or so, then scrub all the way to the end to verify what you and others are commenting. And if there really was no malicious intent behind the use of the phrase, it would be a show of good faith and a demonstration of good character to at least acknowledge that a notable coincidence has occurred and that his sponsor suggested that he use the phrase and reiterate that he didn’t intend to steal anything. I doubt he will do that though. His whole response to the situation basically says, “I don’t know who you are and I refuse to acknowledge even the slightest possibility that I did anything wrong.”
Hi Erica, good to see you nerding out about steels again! Love me some CruWear, even in "normal" production knives, the toughness is just like I like it for small bevel angles (15-17 dps). No microchipping for me, wonderful. Have you tried SPY27 yet? Would be interesting for me, how it fits in with the other stainless steels... 🤗
Maybe something like, “Love your knives. Be original. I love you all.” That way you can subtly let him and all others know that you know what they did and that they know what they did.
USE YOUR SHIT! LEARN TO SHARPEN YOUR KNIVES! I LOVE YOU SO MUCH FAM! TAKE CARE! there, I said it for you. That's your thing. Worksharp would be stupid to try and claim it as theirs when you have a backlog of videos with you saying it.
@@ericasedcsame!! I’m excited for Spyderco to release the next run of 15v with Shawn’s HT. They have the para 3 in 15v on their site listed and it says “coming soon”, so hopefully I can get my hands on it!
I have a relatively wide range of steels that I like, although I have a particular preference for tool steels and here are two of my favorite tool steels: A2 for non-powdered and K390 for powdered steels.
I just bought a Spyderco FB05PGY Temperance Lightweight Sprint Run Fixed Blade Knife 4.46" CPM-CruWear Satin Plain Blade, so I'm curious how CruWear does, never used it before
1:35 Rex-45. I agree. Amazing. 3:37 Maxamet. No personal experience yet. 6:15 K390. I agree. (Not my absolute favourite though) 8:59 10V. No personal experience yet. 10:39 8670. No personal experience yet. 13:59 Cruwear. I agree. Love it. 16:42 Magnacut. I agree. Perfect allrounder. 18:13 4V. I agree. Great toughness. 20:55 I totally agree. Steel-nerding is fantastic. 😊 22:47 WTF? I hate when people take away other people’s ideas and sell them as theirs.
I saw that video yesterday, and that was the first thing I thought when I heard him use your tagline. I’m like, “That’s Erica’s tagline! How did he pick that up?” By the way, I think the other guy’s name is Pirate Hooker Ricky.😂
Totally nerding out to your content and then just shocked by the last part. I know you don’t want any trouble, and I’m not going to tell you what to do. You have to be true to yourself, but I don’t like people taking advantage of you. I’ve watched that other channel a few times and concluded that they don’t have anything that I need or want. Frankly, their affiliation with worksharp has me questioning ever buying any worksharp products after finding this out. What scum, and they have the nerve to look sideways at you? Laughable. Incidentally, my wife and I love fall colors, so your love of orange fits right into our color palette. I support you 100%.
You should see the screen shots. They’re actually pretty rude and mean. Because they used my words. Like… weird flex but ok😂 also I love you and your wife❤
@@ericasedc I went and looked. I shouldn’t have because now I have a headache and I’m angry. Just because he knows you doesn’t mean he watches your videos? Sure, I get that, but how quickly could he have just checked one out? Yeah, he’s a jerk. I need to grab some Tylenol. We love you back🥰🧡🧡🧡
I don’t use my REX45 Spyderco much at all, but I sharpened the factory edge off at 1200 Grit & stropped on 1 micron diamond and think I could shave my face with it! Agree with 600 grit for maxamet & S110V
How about: “Remember what your stuff is for, go out and use it.” Or maybe a mama joke: “Ok bye, and like always give your mama a hug for the both of us.”
First when it comes to steels this is an awesome video and loved your discussion on K390. I am actually looking into getting a reblade AD20.5 hoping around 66 HRC in K390 to make a super mod AD20.5 scales and stuff. Thinking of doing a Shark Cub one too with a similarly HRC in Magnacut. As for the Outro. I can believe Taylor that he can know of you and not seen any of your content since I think he is scripted and handled. What I can not understand and found disingenuous is Rikki's statements. He is either a liar or turns your videos off before the end. But I do not think they are trying to trademark the expression. Plus even if they were I would think you have a pretty strong case against them that you were and have been using it long before they had. My opinion is use your outro. It is yours.
That's just dirty, I've heard you use that for a long time. He could randomly watch last 10 seconds of any one of your videos from a year ago. Any decent person would be like hey I don't want to ripoff what someone has said 100's of times.
Well it’s hilarious his editor was like “I have watched your videos and never heard you say that.” Like… there’s no way that’s true because I say it every single time I speak in a video😂 also why would Work Sharp ask you to say that TWICE in 30 seconds. Like come on. I’m stupid but not THAT stupid.
I find it extremely difficult to evaluate steel preferences without being able to include geometry preferences, simply because I don't have enough blades to judge,, my current top 3 would be.. Spyderco Police in PD-1 (Cruwear?), Spyderco Military in S110v, and Small Inkosi in Magnacut, All currently with toothy edges,, (I'm annoyed with the Inkosi at the moment, because it separated the end of my thumb from the rest of me, (almost),, Lmfao,, ) Great video btw,,!! ps, keep your outro, That guy is a dufus anyway, I stopped watching his videos ages ago,,,!!
Knife steels ? I am having fun buying the Old New Stock Case Chrome Vanadium which is quickly drying up around here at local Hardware Stores. I still prefer their old CV verses the new CS steel which is 1095.
@@ericasedc Oh okay, maybe its just youtube being weird again then. I read through everything that came up and couldnt find it. But then again sometimes comments I make just disappear, I dont get notified on answers and so on.
What about? 7Cr17MoV? The greatest steal there ever was, is now, or ever will be. No one will ever make a greater steal than that, which is why the Gerber sumo is the greatest knife of all times. Out performing all other knives. Why is the Gerber sumo so great what makes the Gerber sumo so much better than every Benchmade in spider Co. ever produced? These are the hard questions that keep knife philosopher’s awake at night, waiting for the dawn
only bested by 3Cr. But really, when I was watching this vid and got to CruWear... I was thinking about how a lot of Chinese manufacturers are using DC53 now, for very affordable prices. DC53 is like Sleipner or VascoWear, which could be called a "budget" (non powdered) CruWear
with the Wugout for $10 in D2, and DC53 done decently well in China now, things are getting pretty interesting for knives. Like a different chapter from the high dollar powdered super steels.
@@PotatoCheese SDOKEDC, Eafengrow, Watchman, Omesio... probably others. Just Chinese companies that have factories make them and slap their brand on it.
I can’t I don’t think. He commented the Trade Mark sign under it. And his “sponsor” aka WorkSharp apparently “told” him to do this. So I am NOT getting sued or sent a C&D for saying my line that they paid for😂
Your outro has been well documented in the public space for a long time. Trying to assume the best of people’s intentions here… maybe the TM comment was a spur of the moment poor attempt at humor. I’d say ignore it and do your thing!
Erica, Erica, Erica… I’m sorry for all the crap that has been flung your way. Words are important, and we’ve loved your outro. But, we love you for YOU, who you are, your fun personality, uniqueness- and your great practical content. Yeah, a cool outro is great, and you should be able to claim it. But it’s not what we love - we love YOU. You’ll find your way. Hang in there, dear one. 👊💪❤
What if we your fans send you videos of us saying use your shit and you stitch it in right when your getting ready to say it. Can they still sue. I have learned so much from you and them frickers watch your channel so they can add some real content and accurate info to there bland and boring channels. Keep being awesome. We love you
People like to steal catchy comments and can act as if they resemble the human anal sphincter. Carry on! And, I watch you because you are smart, not dumb.
@@ericasedctbf there's no risk involved really, they have to prove it's trademarked and your usage if it for the past several years more than protects you. Hell, there's probably some youtube lawyers who would take it on contingency given it's such a slam dunk.
As I've always said since 2020?,use your shit etc. I would also drop your saying in youtubes searchable terms in your videos. No drama, say it and own it. Maybe even make a tacky sign in the background with your saying. Get tacky, sell a shirt with your saying on it. Just some random thoughts from a occasional viewer from the beer flu.
@@paullmight42 Rikki has actually treated me like crap throughout this entire thing. Like so rude and condescending and continuously was gaslighting me. I screen shotted it all and posted it actually
@@ericasedc that really sux....idk why but i feel like it may have been Taylor's bitch ass using Ricky's account...or maybe that's just what my smooth brain wants me to believe....either waym that really sux and i am sorry
Unfortunately it seems you need a new tag line. This community and the industry are really becoming unbearable 😭. So here’s a question for you for an edc knife would you prefer 8670 or Cruwear?🤔
Right?! And Cruwear. It’s compositionally superior in almost every sense aside from toughness. However, a LOT of people do not actually use their knives for much, so 8670 is a fine choice and I would love that as well!
@@vegpwrshlominator1873 go look at my community post. He was so rude to me and then deleted the comments when people called him out. Luckily I screen shot EVERYTHING and caught it all before he deleted it.
Holy shit he did delete the comments. Wow. Rather than come clean or try to deal with the situation in a professional manner he just takes his ball and runs home. Disgraceful.
Gotta be completely honest with you, I have no clue who you are out what you’re about. “Use your shit” and “sharpen your knives” are phrases I’ve said and used since I served almost 20 years ago. Just saying, I get if that’s your specific outro then it’s your catch phrase…. But that’s been around longer than both of y’all.
@@mikemade_ no one on their videos says the phrase “use your shit, sharpen your knives.” It’s an outro I put together. Thanks so much for watching- I appreciate it!
@@ericasedc Just saying it's a phrase probably older than you are... Also, watched about 20 different video outros of yours and most of them were just "use your shit, use your fucking shit, use your shit use your shit" while you flipped the blade around. Your more recent videos this past year seem to be more concise. I don't know, consider TM the phrase on your brand if you have one. FYI this shit just popped in my feed for a topic I'm in to. No hate, as I said before never heard of you or your channel. All the best!!
Have watched your content and enjoyed it for the last 3 years, "Use your shit and learn how to sharpen your knives" is the motto I strive for. Thank you for your work and wish you a good rest of your day.
@@kathrynhorn8095 thanks so much for your support!!!
Great video as always. I’ve watched many of your steel overview videos and they’re some of my favorites so it’s nice to see you make an updated one.
Spy27 is my favorite steel right now because I’m garbage at sharpening and it is really balanced and very forgiving in terms of maintenance.
Praying for you always. Have a great weekend!
I LOVE SPY27 and miss my Native in it! Fabulous option. I love making these nerdy videos!!!🎉
Btw, that’s shady as hell that a big channel like Bestdamnedc would jack your outro phrase like that. There’s very little chance that he doesn’t know you or isn’t aware of your channel. If MarineX knows who you are and likes your content, then Bestdamnedc does as well.
I haven't had a chance to use too many different steels, butIm'm really impressed by the native 5 magnacut. And Don't let that edc infomercial steal your line. He can have his writers come up with some cheap buy now line.
They’re LOADED from shilling Chinese products all day😂 I have no money to fight that😂😂😂😂
@ericasedc Don't need money. Just need people to stop watching his commercials.
@ hahahaha
KEEP YOUR OUTRO!!!!🔥💯 you’re the OG!
@@Ersk88 hahahahha right?!
Do you have any videos going through the different types of blade geometry? Like what is a hollow grind, full flat, scandi etc, ideal angles for different uses
@@willnolan7040 yes. Maybe under the Steel Discussion playlist?
Yaaaasss. I just looked into Larrins spreadsheets on steels, right after watching Outdoor55 destroy S7 with his heat treat. Have been wondering what makers in the modern world I could put stock in for quality heat treatments.
Alex has some sick videos for sure!🎉
Mind you, I don't like (literally any, & I've looked) of Spyderco's designs.
When I first got into the knife world, I ended up buying the only two Spyderco's I own, & they are both in H1, unfortunately. I had no good direction back then. 😅
@ oh no!!
I love Maxamet. It's actually one of the few steels I haven't managed to chip in use. I've chipped 10v, REX 45 and k390 but Maxamet just does not care if I hit hard stuff.
@@Itrieditathome889 I love that for you!!!!
Never had any probs either, but I would say if you're sharpening it, use a pretty high angle just in case
This outro phrase issue on Taylor’s channel is ridiculous and the responses that both he and Rikki gave were incredibly dismissive and disrespectful.
If his statement that he didn’t steal anything is true, it would take roughly 2-3 minutes to go to this channel, play any video from the last few years or so, then scrub all the way to the end to verify what you and others are commenting. And if there really was no malicious intent behind the use of the phrase, it would be a show of good faith and a demonstration of good character to at least acknowledge that a notable coincidence has occurred and that his sponsor suggested that he use the phrase and reiterate that he didn’t intend to steal anything.
I doubt he will do that though. His whole response to the situation basically says, “I don’t know who you are and I refuse to acknowledge even the slightest possibility that I did anything wrong.”
@@pow-low well it’s funny cause he acts like he doesn’t know me, yet has featured my work on his channel. So it’s hilarious actually.
Hi Erica, good to see you nerding out about steels again! Love me some CruWear, even in "normal" production knives, the toughness is just like I like it for small bevel angles (15-17 dps). No microchipping for me, wonderful. Have you tried SPY27 yet? Would be interesting for me, how it fits in with the other stainless steels... 🤗
@@Barney_Greenway I love SPY27! I have content and reviews on it!
@@ericasedc Wow, cool! Thx for your fast reply, I'll check it out. By the way, luv u 2 😳🙃😇
The only great thing about spy27 is how easy it is to sharpen
Maybe something like, “Love your knives. Be original. I love you all.” That way you can subtly let him and all others know that you know what they did and that they know what they did.
That a great candidate!
@ YOU’RE a great candidate!
USE YOUR SHIT! LEARN TO SHARPEN YOUR KNIVES! I LOVE YOU SO MUCH FAM! TAKE CARE! there, I said it for you. That's your thing. Worksharp would be stupid to try and claim it as theirs when you have a backlog of videos with you saying it.
I am learning it’s my own intellectual property as I started it years ago and claimed it… so we may be in the clear??
New outro suggestions:
"Use your knives like I use your Mom."
"Use your tools. Sharpen your tools. Don't be a tool."
@@narkfly LOVE the mom one!!!!
Digging the knife nerd steel talk. You made me pull out my maxamet and k390 spydercos and mess around with em
Yessss🎉🎉🎉🎉
I have a Stonehocker Spike in 10v and it’s fantastic. Have to check out some k390 soon
I have heard Simon’s work is wonderful. Hope you get to check out K390!
Cruwear is my favorite but I feel like if I had a chance to test 15v it would take the cake
I am DYING for 15V!!!!!
@@ericasedcsame!! I’m excited for Spyderco to release the next run of 15v with Shawn’s HT. They have the para 3 in 15v on their site listed and it says “coming soon”, so hopefully I can get my hands on it!
@ It will probably be amazing
@ same!!!
I have a relatively wide range of steels that I like, although I have a particular preference for tool steels and here are two of my favorite tool steels: A2 for non-powdered and K390 for powdered steels.
@@achimgeist5185 I need to try some A2 above 61 HRC
@@ericasedcI have a custom knife in A2 with 62.5 hrc hardness, simply great, really good edge retention and sharpening is a pleasure.
@ that sounds awesome!
Use your beer and sharpen your mimes.
...I meant to put moms... Autocorrect strikes again.
I am DYING😂
I just bought a Spyderco FB05PGY Temperance Lightweight Sprint Run Fixed Blade Knife 4.46" CPM-CruWear Satin Plain Blade, so I'm curious how CruWear does, never used it before
Oh it’s SO GOOD🎉
@@ericasedc after seeing your video it's a relief !! In hindsight I should have asked you first before I bought it !! :)
1:35 Rex-45. I agree. Amazing.
3:37 Maxamet. No personal experience yet.
6:15 K390. I agree. (Not my absolute favourite though)
8:59 10V. No personal experience yet.
10:39 8670. No personal experience yet.
13:59 Cruwear. I agree. Love it.
16:42 Magnacut. I agree. Perfect allrounder.
18:13 4V. I agree. Great toughness.
20:55 I totally agree. Steel-nerding is fantastic. 😊
22:47 WTF? I hate when people take away other people’s ideas and sell them as theirs.
We seem to enjoy a lot of the same stuff!!! And yes. They were super rude when being called out on it too. So that’s great😂
@@ericasedc I also love Vanax, PM60, S45VN and Rex-121. Ah and PD#1 (which basically is CruWear). 😁
Heck yea! Everything you said is on point. Steel is super interesting!👊
You know the deal F!🎉🎉🎉
You have to get your hands on a Sandrin tungsten carbide edge lasts very long time hard to sharpen very chippy though. Great video 👍
@@sal1964 cheers!!
The other guy probably heard you saying your outro as you were leaving his mom’s house😆Great video, E!
THAT IS WHAT HAPPENED 😂
I love 8670. Great video!!
It’s SO SICK😂 for a simple carbon steel!
I'd continue using your outro. Why should you have to give it up? You got lots of evidence to support you.
@@no_one_in_particular_ Just nervous of them having money to come after me.
Great to see you keep on doing your thing !!!!
Thanks for the vid👊
@@Bigfish7334 hey always great to see you!!
3V for everything and Magnacut for anything else
@@thefishinglor6931 and your mom for dessert
I saw that video yesterday, and that was the first thing I thought when I heard him use your tagline. I’m like, “That’s Erica’s tagline! How did he pick that up?” By the way, I think the other guy’s name is Pirate Hooker Ricky.😂
@@14ederan his “sponsor” told him to say it twice in 30 seconds apparently
Totally nerding out to your content and then just shocked by the last part. I know you don’t want any trouble, and I’m not going to tell you what to do. You have to be true to yourself, but I don’t like people taking advantage of you. I’ve watched that other channel a few times and concluded that they don’t have anything that I need or want. Frankly, their affiliation with worksharp has me questioning ever buying any worksharp products after finding this out. What scum, and they have the nerve to look sideways at you? Laughable. Incidentally, my wife and I love fall colors, so your love of orange fits right into our color palette. I support you 100%.
You should see the screen shots. They’re actually pretty rude and mean. Because they used my words. Like… weird flex but ok😂 also I love you and your wife❤
@@ericasedc I went and looked. I shouldn’t have because now I have a headache and I’m angry. Just because he knows you doesn’t mean he watches your videos? Sure, I get that, but how quickly could he have just checked one out? Yeah, he’s a jerk. I need to grab some Tylenol. We love you back🥰🧡🧡🧡
@ He does know. Haha
@ I LOVE YOU
Truly an amazing video !
Glad you think so!
@ absolutely!! I’m glad we all can geek out about steels !!
What do you think of ABE-L?
@@justin2166 it’s decent! I like it when it’s done properly
I don’t use my REX45 Spyderco much at all, but I sharpened the factory edge off at 1200 Grit & stropped on 1 micron diamond and think I could shave my face with it!
Agree with 600 grit for maxamet & S110V
@@xpig332 nice🤜🏼🤪
Love your channel, so interesting! ❤😂
@@DerekCribbins hey thanks so much!!!
How about: “Remember what your stuff is for, go out and use it.” Or maybe a mama joke: “Ok bye, and like always give your mama a hug for the both of us.”
That’s a great idea!
The Rex45 regrind is awesome.
@@Black_Cat_997 it’s legit 4thou BTE😻☠️
Maybe…”Use your moms and sharpen your knives?”🤔
Use your moms and sharpen your moms!
Use your moms. Learn how to sharpen your moms. I love your moms so much. Take care…of your moms.
@ I really love that!
I'm sure "those that steal you Outro" will find out about the meaning of "karma" in the end.
Take care 'n have a good weekend E.
We’ll see I guess! You too Mike!!!
I really like this type of video. I only own one of these super steels. Guess I need to get on the ball. Thanks for your time. Have a great weekend.
@@timtitus2532 wait which one do you have again Tim?!
Who made that k390 dart I’ve been looking for one like that for years.
Northern Knifeworks. Contact him on Instagram!
You could go with use sharpen repeat
@@lxixg9 that is a good one!
Good list I agree except the 5670 and that is just bc I have never experienced it
@@malcolmholt2010 the 8670 is so fun!
k390 delica will be my next pickup, and also we'll say the outro for you: USE YOUR SHIT AND LEARN HOW TO SHARPEN YOUR KNIVES
@@snoozzzyy bahahaha thanks brotha!!!! I appreciate you doing it for me!
First when it comes to steels this is an awesome video and loved your discussion on K390. I am actually looking into getting a reblade AD20.5 hoping around 66 HRC in K390 to make a super mod AD20.5 scales and stuff. Thinking of doing a Shark Cub one too with a similarly HRC in Magnacut.
As for the Outro. I can believe Taylor that he can know of you and not seen any of your content since I think he is scripted and handled. What I can not understand and found disingenuous is Rikki's statements. He is either a liar or turns your videos off before the end. But I do not think they are trying to trademark the expression. Plus even if they were I would think you have a pretty strong case against them that you were and have been using it long before they had. My opinion is use your outro. It is yours.
I have recently learned that my outro is actually my intelectual property and protected already, so I will be taking further action!
Erica, have you tried carpenter micromelt pd#1? If so do you find it the same as cruware?
@@chrisdubois7688 I have not
That's just dirty, I've heard you use that for a long time. He could randomly watch last 10 seconds of any one of your videos from a year ago. Any decent person would be like hey I don't want to ripoff what someone has said 100's of times.
Well it’s hilarious his editor was like “I have watched your videos and never heard you say that.” Like… there’s no way that’s true because I say it every single time I speak in a video😂 also why would Work Sharp ask you to say that TWICE in 30 seconds. Like come on. I’m stupid but not THAT stupid.
great vid 👍
@@voss9933 thanks!!
K294 is bohlers version of 10v not k390.
@@Edcreviewer wrong. Bohler developed K390 as an alternative to CPM 10V. Thanks for watching!
I find it extremely difficult to evaluate steel preferences without being able to include geometry preferences, simply because I don't have enough blades to judge,, my current top 3 would be..
Spyderco Police in PD-1 (Cruwear?),
Spyderco Military in S110v, and Small Inkosi in Magnacut,
All currently with toothy edges,,
(I'm annoyed with the Inkosi at the moment, because it separated the end of my thumb from the rest of me, (almost),, Lmfao,, )
Great video btw,,!!
ps, keep your outro,
That guy is a dufus anyway, I stopped watching his videos ages ago,,,!!
Haha thanks man!!! Also great choices🎉
Magnacut=🔥
@@dualsportoutdoors totally
Knife steels ? I am having fun buying the Old New Stock Case Chrome Vanadium which is quickly drying up around here at local Hardware Stores. I still prefer their old CV verses the new CS steel which is 1095.
@@montedodge341 nice!!!!!
Always on the edge...
❤❤❤
All this self censorship is so lame. Say what you want, it's your right. Love you, but worksharp isn't going to come after you for use your shit.
You never know what will happen these days!
I don't have anything in 8670, but i love 52100. There are some steels that are great but are not powder.
@@darksi226 I hear ya!!!
Horse puckey! That is your saying 100 percent!
@@r.english3480 of course it is! And all those bushcraft boys have ALWAYS made fun of me for it. That’s the funniest part!
Stay on the edge. Peace out.
@@homeofinventions that’s a great one too!!!!
I did it again. Bought rex 121 sage 5 and hate it. Im almost thinking that the super steel stuff is some kind of psychological operation.
Oooof
BBB may not agree with you.
Outro: get out and touch the grass and score some a$$.
I LOVE THAT🎉😂
Carving my way to the top. Seeya I the next upload.
@@homeofinventions heck yes!
...in the next upload.
24:58 - Are all of those comments culled from his video now? Not a single one shows up for me.
No way. Thank God I have it all saved😂
Just checked. They’re still there!
@@ericasedc Oh okay, maybe its just youtube being weird again then. I read through everything that came up and couldnt find it.
But then again sometimes comments I make just disappear, I dont get notified on answers and so on.
@ that does happen!
What about? 7Cr17MoV? The greatest steal there ever was, is now, or ever will be. No one will ever make a greater steal than that, which is why the Gerber sumo is the greatest knife of all times. Out performing all other knives. Why is the Gerber sumo so great what makes the Gerber sumo so much better than every Benchmade in spider Co. ever produced? These are the hard questions that keep knife philosopher’s awake at night, waiting for the dawn
only bested by 3Cr. But really, when I was watching this vid and got to CruWear... I was thinking about how a lot of Chinese manufacturers are using DC53 now, for very affordable prices. DC53 is like Sleipner or VascoWear, which could be called a "budget" (non powdered) CruWear
with the Wugout for $10 in D2, and DC53 done decently well in China now, things are getting pretty interesting for knives. Like a different chapter from the high dollar powdered super steels.
@@carlh7795 which companies are using dc53?
You mom keeps my philosopher oriented brain awake all night
@@PotatoCheese SDOKEDC, Eafengrow, Watchman, Omesio... probably others. Just Chinese companies that have factories make them and slap their brand on it.
You said it first, but Tayor is too big for you to fight. Get a new line and trad mark it- make it something awesome
Yeah he is LOADED it looks like. So I do not need to be getting sued😂
Go use your shit, learn to sharpen your knives, we will see you so soon, I love you so much, AND TO HELL WITH ALL THE HATERS.
Hahahaha I wish!
Good evening Ms E. Good luck dealing with the drama. Hope your weekend goes well. Take care girl. See ya.🇺🇲🌲🔥🔪
Thanks J!!! Happy weekend!
Aggressive opening 😂
Everyone beware!!
Keep it sharp. Erica out.
@@homeofinventions oooh I love that!
Actually you should trademark it! You have proof it was yours first..
@@Ersk88 A lot of people are saying that!!!
Use your line. Fuck the haters. You're the perfect woman!
I can’t I don’t think. He commented the Trade Mark sign under it. And his “sponsor” aka WorkSharp apparently “told” him to do this. So I am NOT getting sued or sent a C&D for saying my line that they paid for😂
HAHAHAHA, PERV. STRANGER DANGER
Spy 27 fanboi
@@jakeganey7032 I reallllly miss my SPY27!
Your outro has been well documented in the public space for a long time. Trying to assume the best of people’s intentions here… maybe the TM comment was a spur of the moment poor attempt at humor. I’d say ignore it and do your thing!
exactly. As long as she has proof of saying it as a "thing" from well before any trademark, keep using it.
Go look at his comments. Trust me it’s something fishy haha.
Still say Case CV and Buck SV30 are beyond what they should be….
Thanks for stopping in!
Shake haters. Love your channel!
It loves YOU!!!!!!!
Hallo Erica,
liebe Grüße aus Deutschland.
Claus
@@Waldlaufer-kx8os WELCOME!
Erica, Erica, Erica… I’m sorry for all the crap that has been flung your way. Words are important, and we’ve loved your outro. But, we love you for YOU, who you are, your fun personality, uniqueness- and your great practical content. Yeah, a cool outro is great, and you should be able to claim it. But it’s not what we love - we love YOU. You’ll find your way. Hang in there, dear one. 👊💪❤
@@RobAndersonTexas I LOVE YOU ROB!
Why are there bizarre comments with people giving out low key hate about you saying “Use your shit”? Is it some kind of in joke I dont get?
Long story haha
That is crazy, so offensive and vile! Trademarking Your line is a foul move.
@@janpen78 it’s sorta creepy haha
@@ericasedc And bad karma. Not good.
What if we your fans send you videos of us saying use your shit and you stitch it in right when your getting ready to say it. Can they still sue.
I have learned so much from you and them frickers watch your channel so they can add some real content and accurate info to there bland and boring channels.
Keep being awesome. We love you
That would be HILARIOUS!
People like to steal catchy comments and can act as if they resemble the human anal sphincter. Carry on! And, I watch you because you are smart, not dumb.
Haha thanks❤
Use your outro, sharpen your tongue. 😅 Until WS actually presents you with a trademark notice, do your thing.
@@johnsanford3596 Not risking it haha
@@ericasedctbf there's no risk involved really, they have to prove it's trademarked and your usage if it for the past several years more than protects you. Hell, there's probably some youtube lawyers who would take it on contingency given it's such a slam dunk.
@ good point
As I've always said since 2020?,use your shit etc.
I would also drop your saying in youtubes searchable terms in your videos. No drama, say it and own it. Maybe even make a tacky sign in the background with your saying. Get tacky, sell a shirt with your saying on it. Just some random thoughts from a occasional viewer from the beer flu.
Haha thanks!
BDEdc is a douche nozzle but Ricky is pretty cool....sux to hear that.....New Intro: "Put Things in Places...."
@@paullmight42 Rikki has actually treated me like crap throughout this entire thing. Like so rude and condescending and continuously was gaslighting me. I screen shotted it all and posted it actually
@@ericasedc that really sux....idk why but i feel like it may have been Taylor's bitch ass using Ricky's account...or maybe that's just what my smooth brain wants me to believe....either waym that really sux and i am sorry
Un saludo!. 👋🤭🔥🔪🇪🇸
Cheers!
Unfortunately it seems you need a new tag line. This community and the industry are really becoming unbearable 😭. So here’s a question for you for an edc knife would you prefer 8670 or Cruwear?🤔
Right?! And Cruwear. It’s compositionally superior in almost every sense aside from toughness. However, a LOT of people do not actually use their knives for much, so 8670 is a fine choice and I would love that as well!
Well you know why I asked🤣
@ yes. Yes I do haha
Come on! Every single knife Tuber has said “Use your shit” before
Good thing that isn’t what we’re talking about! Of course they have. Thanks for watching!
I enjoy watching BestDamnEdc but seriously if this becomes a thing he is going to have a problem with I will loose interest.
@@vegpwrshlominator1873 go look at my community post. He was so rude to me and then deleted the comments when people called him out. Luckily I screen shot EVERYTHING and caught it all before he deleted it.
@@vegpwrshlominator1873 he seems like actually a wicked rude person haha which I always knew. True colors come out when people get caught!
Holy shit he did delete the comments. Wow. Rather than come clean or try to deal with the situation in a professional manner he just takes his ball and runs home. Disgraceful.
@@pow-low yep. What a coward.
Gotta be completely honest with you, I have no clue who you are out what you’re about. “Use your shit” and “sharpen your knives” are phrases I’ve said and used since I served almost 20 years ago. Just saying, I get if that’s your specific outro then it’s your catch phrase…. But that’s been around longer than both of y’all.
@@mikemade_ no one on their videos says the phrase “use your shit, sharpen your knives.” It’s an outro I put together. Thanks so much for watching- I appreciate it!
@@ericasedc Just saying it's a phrase probably older than you are... Also, watched about 20 different video outros of yours and most of them were just "use your shit, use your fucking shit, use your shit use your shit" while you flipped the blade around. Your more recent videos this past year seem to be more concise. I don't know, consider TM the phrase on your brand if you have one. FYI this shit just popped in my feed for a topic I'm in to. No hate, as I said before never heard of you or your channel. All the best!!
@ thanks for commenting!
Who made that k390 dart I’ve been looking for one like that for years.
@@t-moneylove Northern Knifeworks
@@t-moneylove His name is Levi Herrick. Tell him I sent you! instagram.com/northern_knifeworks?igsh=enBuZGlmM3A3bzU4