100V to 18V Chainsaw Conversion | RYOBI CS 3601 Electric Chainsaw
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- Cord to Cordless Chainsaw Conversion Video
I found this chainsaw from a Japanese recycling shop. It does not work anymore because the armature is broken. I decided to convert it to an 18V cordless chainsaw by rewinding the armature and replacing the field with a permanent magnet. Let's see it in detail in this video.
More information could find in the community / @gear_show .
After the test, I felt it needed more speed, while the torque and power were good enough to cut the tree. It would be better with a 24V battery.
To be honest, this chainsaw is much better than the 18V Black & Decker that I just restored • NiMH to Li-ion Chainsa...
It is easier than my previous 36V chainsaw conversion • Electric Chainsaw Conv...
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show
My favorite tool you have is either your Makita impact driver, or (if you can believe it) your turntable lid wash basin. I don't know why, but I smile every time I see the turntable lid come out. :) 😃
Agreed, I need that screwdriver now!
I'm glad you like it, thank you! 😃
@@shanebergeron747 е3е222вввв222222в2сп
I was running this saw for about 2 hours at about a 30-50% duty cycle th-cam.com/users/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
Wow, another tool saved from waste dump, good job! Also, back to old-school motor rewinding. Good job, as always!
Yes! Thank you again!
You convert ing 100 v to18v great job 👏👏👏👏😎😎
Thank you so much 😀
Awesome job! I love the "weathered" look of old tools that are just cleaned up. I don't particularly like paint added. I appreciate the informative nature of this video as well as how handy it seems! Thanks for the time and effort taken to make this video!
You're welcome! I'm so glad that you love this video. Thank you!
Да она еле пилит на этих батарейках. Надо было оставлять от сети.
I am never disappointed by the Gear Show channel. For me it's always an automatic thumb up. I always enjoy the innovative ways you do hardware hacking and your armature rewind videos. Thanks.
Super restoration 👍
Thanks 👍
Brilliant job a pleasure to watch and I've got a Makita Screwdriver after watching you use yours, it's my go too tool and it gets lots of use.
You should ask Makita for commission.
That is a great idea, thank you!
great job👍
Thanks
Great project
Thank you!
I love the tiny impact driver
I love it too, it is really easy.
@@gear_show can you give me a model number?
This is the type of content that I'm coming here for.Your knowledge is something to die for. Absolutely impressed.
Okay, I'll try to create content like this, thank you!
Helal olsun bakır sarmak yetenek işi. Adam emek veriyor beğenmemek ayıp olur
Teşekkür ederim! Videomu beğenmene sevindim.
Your work is just fabulous
Thank you so much!
Awsom reveinding job 👍👍
Thanks 👍
what's the next tool if you will repair?
I don't know yet.
Please shorten bar and chain. That gives you more chain speed and power. This chain too long for 18v motor. I use Einhell 40v battery powered brushless chainsaw. It can only hand such a long chain. Appreciate your works. I think you deserve more followers. Greetings from Turkey.
amazing as always Love to see how you are going to modify everything to make it work very genius how you make everything work Love it Thanks for Sharing
You're welcome! Thank you for coming back to this channel.
great restoration , Absolutely flawless ! but the armature is little bit weak but its ok and working almost fine 🧡🧡 love you and keep up the good work
Yes, thank you for sharing!
your builde is better than some power tools companies
Wow, really! I'm so glad to hear that, thank you!
CONGRATULATIONS amazing video my big support great restorstion
Big thanks, I'm glad that you still like my video.
Never get tired watching do a motor but this rebuild is on another lever nicely done 😎👍👌
Glad you enjoyed it
공구수리에 역시 달인이세요👍👍👍👍👍👍👍👍👍👍👍👍👍
감사합니다! 그 소식을 듣게 되어 기쁩니다.
Cool!!!
Cu?
Thank you!
Greetings from Turkey, sir, good job, the videos are very good, I follow them all the time, I wish you success sir
I'm glad to hear that, thank you so much!
@@gear_show I am watching your videos intensely, are you making restoration videos for this job or for hobby purposes, I am informed thanks to you, I am really grateful to you.
fabulous I think a shorter bar /thinner chin will help with the lack of power :) it would be an awesome trimmer or to cut up old pallets ;)
Haha, thank you for sharing :D
fantastic Idea Thank You.
You are most welcome
You are doing a great job 🙂🙂🙂🙂🙂🙂
Thank you so much 😀
The restoration was great, but when you're restoring/converting a chainsaw, please replace the chain.
Okay, Nice tip, thank you so much!
very clever great job i don't think the ants liked you cutting on that tree stump
Thank you! They want to be in this video.
Bence tam boy bir kütüğü kesecek kadar pillerinin dayanacağını sanmıyorum ama güzel ve akıllıca bir tercih 👍
26:58 - Mr. Gear Show has a voice! (He sounds like an Animal Crossing character though...hehehe)
26:56*
This was put out on my birthday 😊
Sudah q tunggu videoy sangat bagus Cordless chansawnya
Thanks again!
I'd love to see you expand your repertoire to ripping the gas engines out of things and powering them with custom made DC motors and batteries.
Cool idea, thank you so much!
There is actually no need to replace the stator with a permanent magnet. you can rewind the stator to work at a lower voltage.
I guess I know what your washing bath is. It should be an LP top cover)
Great restorations!
Yes! Thank you!
Dear Gear Show. Can you make a particular rewinding video? With theory, aspects etc. Many viewers would like to see that.
Love watching your video
So glad!
Mucho trabajo dio esta restauración, pero valió la pena porque quedo en perfecto funcionamiento. Es una maquina chica, pero muy útil. Veo que en el canal hay muchas restauraciones, voy a seguir mirando! Gracias por este vídeo.
¡Denada gracias!
Wow... that winding session could've been sped up :O That's 6 mins of my life I will not get back..
Again great work also have all details too. Thank you
You're welcome, thank you!
Those ants were pissed at the end.
Great job. You should have soldered the copper wires, imho.
I'm high current situations, many times solder isn't used - for concern of it failing at high amp/high temp. Crimping/staking is the common go to. However, I would certainly agree that adding solder after the fact. Unless you mean on the commutater - then you don't solder then so you don't melt the shellac coating (the reason he scrapes out with his knife when wrapping around each finger).
It's great!Thank you. Best wishes from Vietnam
Thank you very much!
Nice Job, with additional heat shrink tube install to protect the external wiring would be perfect :-)
Good idea! Thanks for the tips!
incredible project. thanks for sharing :)
You're welcome! Thank you for watching!
Interesting. Hello new friend !
Chique show 👍👍🎸!!!!
Excellent work 👍👍👍 . Thanks for sharing
Thank you too 😙
I hope you make more videos like this
Okay, thank you!
Olá! Acho muito legal essas conversões de motores AC para DC que você faz. Em 24:10 a corrente com carga é tão alta que a fonte entra em modo de proteção por corrente constante. Para 18V só uma bateria mesmo para manter a potência do motor.
Oi! Muito obrigado pela entrada.
You are awesome bro!, are tu an eléctrical, mechanical, electronic engineer? You'd show your tools, are fascinating. Congratulations!!!
I'm IT engineer :), but I love electronic and mechanical.
@@gear_show Great, and, what's going on with the tools you restore or updated. In wich country are you living. Confratulations and regards.
Great work, can you upgrade a MAGLITE torch to led, rechargeable and make it powerbank out of it?
Okay, great idea, thank you!
احسنت مبدع
Nice
Thanks
Great Video!
Glad you enjoyed it
Great job, thank you brother. You are so talented
I appreciate that!
Great job!
Thanks for the visit
@@gear_show you're welcome)) very interesting to looking how you doing a new rotor))
Yes!
Thanks
Trabalhoso porém gratificante! Gratidão Gear Show
Thank you!
Amazing work ☺
Thank you!
Good job
Thanks
Absolute masterpiece! I hope to see one collab between you and my mecanics channel!
Комментарий в поддержку канала и ролика, а также труда мастера.
Да, вот это мощно 🤣🤣🤣🤣
Upgrade w/ two batteries in series... It will interest..☕
I am thinking about this too, thank you!
A portable electrically driven chainsaw is much convinient than a petrol one.
Yes, for sure in some conditions, :)
Nice one
Thanks 🔥
Hello, Mr.gear. I'd like to request you. Could you restore old Korean tools, such as Aimsak, Keyang?
And, I really enjoyed your video!
Hello 명슥이, I will do it after I could find them. Thank you!
That is impressive. What about the new motor balancing?
Very nice but i think it can have more power it cannot be compared to engine kind
Yes, you're right...
Can you show us how to convert a corded Rigid bucket vacuum(Model# BH0100) to battery power please? Preferably Ridgid batteries or Milwaukee, or just whatever you want because beggars can’t be choosers. Thanks advance!
I don't have that tool to show you...
That is some pretty usable power there ! How's the heat in the motor ? Manageable ?
Like and good job✌️✌️✌️✌️✌️✌️✌️✌️
Thank you!
What about if the field is electro magnet series with armature coil instead of permanent magnet?
Why don't you solder copper wire with the commutator?
Fine for small or dry Wood. No power for wett Wood.
I regret that I can't find wet wood to test.
Wish I could do what you do
I wish you can do it.
Dobra robota, brawo 😎
Thank you!
На последнюю обмотку подкладывай прочную нить 🧵 чтобы потом лучше скрепить последние витки
Mantap 👍👍👍
Are these stored in the pig sty before you find them? Who lets tools get like this?
I don't know too...
Интересно.
Yes, it is..
Modified DC12V
Esse projeto pedia um motor e bateria com 36v.
Bacan sierto
Thank you!
❤️❤️❤️❤️❤️❤️
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Hey i want to convert a cord impact wrench to cordless
Okay, go ahead!
Wat battery Is Lost
Why some rothen tree give some real deal fresh oak.
👌👍
👌👌
Красавчик!
Thanks!
Keren
Thanks again
Yes, all this is good, but there are major drawbacks. 1. The tire for this power is large, there will be heavy loads on the electric motor. 2 Current, the brushes on the anchor are clearly not at a current of 10A, as a result, they will burn out. 3 For cutting samples, take a dry tree - it is harder to cut. 4. How do you sharpen the chain? - you don't know how to sharpen properly. The chain must be fixed when sharpening, the angle of rotation and the top is very sharp- this will lead to shocks when the saw is working. But overall well done!!
Hello привет, I do appreciate with your tips.
Shanu pandey
👍👍😉
Thanks again!
Are you in Japan?
No, I'm not in Japan.
:/ not bad
:D It cut.