Exemplary educational video on using this die. Your demonstrations answered every question I had about using it on multiple calibers. Definitely going to get me one. Thanks Jesse B Outdoors for being direct and to the point. Great video!
InSight Freedom it will definitely help with that. Couldn’t tell that good in the video but that 9mm I pulled right out of the mud in my back yard. Thanks for watching brother 👍🇺🇸
There’s a better made pin on Amazon. I think it’s called squirrel daddy or something like that. I haven’t broke mine yet. Thanks for watching and don’t forget to subscribe if you haven’t already 👍🏻🇺🇸
Brother!! That is the exact set up I plan on when my c-frame press and decapping die come in 4 days. I have a question about where the spent primers go...they stuck under the press? Is there a way to drill a hole underneath the press and rig a tupperware to catch the primers and easily remove the tray to empty it out? Thanks again, Brother. Subbed and Liked.
Doesn't that add a step to the reloading process? I understand you can decap multiple calibers without changing the die, but they still need to be resized
gunnwild1 depends. Some people like to deprime their brass before cleaning to get the primer pockets clean. You can do it with your decapping and resizing die but if your bass is dirty it will gunk up your dies. It’s not a big deal to have this die. It’s just a option. I’d rather have the machine clean the pockets than me 🤣. I hate twisting that tool to clean the pockets out. Clean primer pockets are more of a big deal with rifle rounds than pistol rounds. Thanks for watching brother 👍🇺🇸.
Dang man, mine didn't come in a fancy box, it just came in a hard plastic tube lol. But ya, that die is worth its weight in gold imo. I have mine set up in a spare press as well. 🇺🇸🇺🇸🇺🇸
Crooked Creek Shooting my ram prime I got for my little single stage press came in a clear tube. The rest have come in boxes like this one. Thanks for watching brother 👍🇺🇸
I hate to be the bearer of bad news, but you WILL break that pin! I ordered some replacements from Squirrel Daddy from Amazon or ebay one, I can't remember which one. I broke mine decapping 8mm brass. The military brass has the primers crimped in and they are tougher to remove. Surplus ammo brass gets mixed in, too, so the Berdan primers will for sure break those pins. Be careful, and go ahead and order your replacements. Don't be like me, and have to wait for your replacements to come in.
Exemplary educational video on using this die. Your demonstrations answered every question I had about using it on multiple calibers. Definitely going to get me one. Thanks Jesse B Outdoors for being direct and to the point. Great video!
Thank you and thanks for watching 👍🏻🇺🇸
I need to pick up a universal to keep from dirtying up my dedicated resizing and decapping dies.
InSight Freedom it will definitely help with that. Couldn’t tell that good in the video but that 9mm I pulled right out of the mud in my back yard. Thanks for watching brother 👍🇺🇸
very instructive..thank you!
@@geraldohara thanks for watching.
Didn't get the cool, red case with my decapping die.
Thank you for the video.
Thanks for watching.
Good morning America and Jesse B 🇺🇸👍
Tomon8tor good morning and thanks for watching brother 👍🇺🇸
Need the universal shell holder
Thanks for watching 👍🇺🇸
Could you show how to properly reseat the decapping rod once it does pop up? I can't get mine to loosen up.
Just make the top of your pin a little above flush of the nut. You can lightly tap in down with a rubber mallet.
I break the decapper pins like I own the factory ?
There’s a better made pin on Amazon. I think it’s called squirrel daddy or something like that. I haven’t broke mine yet. Thanks for watching and don’t forget to subscribe if you haven’t already 👍🏻🇺🇸
Brother!! That is the exact set up I plan on when my c-frame press and decapping die come in 4 days. I have a question about where the spent primers go...they stuck under the press? Is there a way to drill a hole underneath the press and rig a tupperware to catch the primers and easily remove the tray to empty it out? Thanks again, Brother. Subbed and Liked.
I drill a hole and they drop into a can. Some people 3D print a tray to put under it. Thanks for watching 👍🇺🇸
Good video.
When the pin goes back up, Can one bang it back in with a mallet or is it necessarily to loosen-up, lower/adjust and tighten ?
You could tap it back down but I wouldn’t hit it to hard.
Those are definitely nice!
The Bohemian Hunting Club comes in very handy. Thanks for watching brother 👍🇺🇸
Good information and video brother
Phil M Rivers thanks and thanks for watching brother 👍🇺🇸
Would it work to use a drill press or is it important to have the designated press?
I would use a reloading press to not have anything get messed up. Thanks for watching.
Thanks Brother
Big Poppa thanks for watching brother 👍🇺🇸
Nice work brother.
The Reloading Press thanks for watching brother 👍🇺🇸
Good stuff bud. I def need one! No case lubing for many of the calibers either!
Warthog 71 no lube for depriming. Great little product. Thanks for watching brother 👍🇺🇸
Nice part to have....Good stuff...
Scott F. Thanks for watching Scott 👍🇺🇸
Doesn't that add a step to the reloading process? I understand you can decap multiple calibers without changing the die, but they still need to be resized
gunnwild1 depends. Some people like to deprime their brass before cleaning to get the primer pockets clean. You can do it with your decapping and resizing die but if your bass is dirty it will gunk up your dies. It’s not a big deal to have this die. It’s just a option. I’d rather have the machine clean the pockets than me 🤣. I hate twisting that tool to clean the pockets out. Clean primer pockets are more of a big deal with rifle rounds than pistol rounds. Thanks for watching brother 👍🇺🇸.
@@jesseboutdoors Oh I didn't realize dirty brass will gunk up the die. Thanks for the info
Good stuff 👍👍🇺🇸🤓
PC BULLET EMPIRE thanks for watching brother 👍🇺🇸
Dang man, mine didn't come in a fancy box, it just came in a hard plastic tube lol. But ya, that die is worth its weight in gold imo. I have mine set up in a spare press as well. 🇺🇸🇺🇸🇺🇸
Crooked Creek Shooting my ram prime I got for my little single stage press came in a clear tube. The rest have come in boxes like this one. Thanks for watching brother 👍🇺🇸
Do you ever gouge your knuckles on that extra long stud bolt on the base of you Lee press? OUCH!
Nope.
No reloading bench should be without one. That and a universal neck expanding die.
Thanks for watching.
'full semi' ??????
It’s a old video. The shirt is making fun of a guy on CNN news that kept saying full semi auto to brain wash people watching the channel.
MARCH 25, 2024
I hate to be the bearer of bad news, but you WILL break that pin! I ordered some replacements from Squirrel Daddy from Amazon or ebay one, I can't remember which one. I broke mine decapping 8mm brass. The military brass has the primers crimped in and they are tougher to remove. Surplus ammo brass gets mixed in, too, so the Berdan primers will for sure break those pins. Be careful, and go ahead and order your replacements. Don't be like me, and have to wait for your replacements to come in.
Jamie Howell good info to know. Thanks for watching 👍🇺🇸
if doesn't fit the 900 magnum I'm inventing
PoP ITgood 🤣 thanks for watching 👍
RCBS lots better
Never tried the RCBS one. Thanks for watching.