I think what could be causing the stalling was, I had a baja 5b clone from king motor rc, and the throttle/brake linkage was very finicky and I also broke two servos that operated this linkage too. But what I think what it is is when he puts on the brakes to slow this beast down, it pulls the butterfly valve shut on the carburetor, therefore stalling the engine
Definitely needs to be richen! And it’s lacking low end power to me not one time did those wheels spin crazy off the line! Maybe being easy on the throttle but a twin how?
richen that beast. it shouldn't stall every time u come to complete stop.. make sure both carbs are set to work together..that is a bad ass ride though.
Thank's Glen really loves his baja. Alot of time went into it.
I think what could be causing the stalling was, I had a baja 5b clone from king motor rc, and the throttle/brake linkage was very finicky and I also broke two servos that operated this linkage too. But what I think what it is is when he puts on the brakes to slow this beast down, it pulls the butterfly valve shut on the carburetor, therefore stalling the engine
Definitely needs to be richen! And it’s lacking low end power to me not one time did those wheels spin crazy off the line! Maybe being easy on the throttle but a twin how?
Have you taco'd the baja? Or do you know what rpms obr acheived when dynoing it? Sounds like its revving real high. Amazing engine
Sounds lean?!Engine turns off
great video, Can you point me to a website where you can buy one of theys pls. Can't seem to find anything over a 26cc, Thanks.
Ron Marsh use a weed wackier engine
Running a bit lean, and that will cause the stallling too. Get your carbs dialed in, and she will run much better.
+Bill Marshall super lean,,sounds like its struggling for gas.
I have a RC Max 70 but I like the twins too.
What is the roll cage like what brand. Please
Team Chase
Why does it keep cutting out?
Is it not the clutch/ Springs that is gone / to loose and that's why it's stalling. Nice car though :)
Thats an badass rc
Incorrect carb linkage setup. Runs great now ! Super reliable.
amazing video I wanted to know where can i get the twin kit fot hpi baja thanks
brandon morales daves motors DDM Im building one right now
OBR....aka O’Neill brothers racing
SOUNDS NICE DUDE
richen that beast. it shouldn't stall every time u come to complete stop.. make sure both carbs are set to work together..that is a bad ass ride though.
THE DUDE that’s what I was going to say, the carbs aren’t happy. It sounds like one of them is popping (too lean)
That's good to hear
lmao god damn it he really does sound like family guy
how much is that engine
Thought I was doing good to buy my first 5th scale I get on here and see I'm way behind
I would just go one gear bigger and some bigger tires.
maybe the engine overheat, you must check the temp...that why is always stop when you brake...
I made the molds for the yellow plastic parts you see on that car
You want a cookie?! Nobody gives a shit
Haha
That fucker sounds good.
Hey someone who finally holds there baja open instead of hitting the throttle every sec
Nice!
ron marsh, check out oneill brothers racing twin cylinder.
wow!
sounds like a nitro engine
$1700 USD
OMG Peter Griffin owns the Baja :o
Clutch spring is shot and it’s way to rich
nice vid man commented liked n subed :)
i know a place that sells them for 1500usd
Really cool!!! but lean...
u can drop a gp620 62cc 7 1/2 hp!
your idle is too low
Is it not the clutch/ Springs that is gone / to loose and that's why it's stalling. Nice car though :)