Universal energy meter PZEM015 how to DIY a case

[@Dzikr_Family]

terimakasih atas sharing nya..... salam from indonesia . 👍👍👍

[@viocaia]

Greetings too..

[@SHAHRIMMOHD]

tq for this video...nice project

[@viocaia]

And useful! Thank you too!

[@V.65M.30]

Now I repeat the design, the boxes are a little different. Thanks for the idea.
Like put earlier.

[@viocaia]

Good luck!

[@mohdAli-je5xm]

Can u share the connection inside and outside the box.. Bit confuse with big blue wire..

[@mohdAli-je5xm]

Share in the diagram

[@viocaia]

I''ll post soon stay tuned..

[@viocaia]

Hey! The blue cable at the bottom of the case it's a direct connection from +input to +output, it's the big red connection from the +battery to +load in the schematic at min 4:48.

[@viocaia]

Also , a better upgrade with self powered backup batteries here th-cam.com/video/UTwrWOMB_CI/w-d-xo.html

[@mohdAli-je5xm]

@@viocaia tq sir 4 ur kind.. From Malaysia

[@liezlhernaez6361]

I saw the shunt heating up to 90°C using thermal camera. Isn't your diy case heating up the wiring inside? That could be dangerous.

[@viocaia]

I never rnotice that..try double the wires, or use thicker ones..double gauge.I doubt the shunt itself is getting hot, the R is to low and you said you have 300A version..

[@andersonpuma4218]

very good

[@viocaia]

Thanks!

[@psxcancer]

Thank you

[@viocaia]

You're welcome