i played with Alpha-N on my turbo 4 cylinder before and man, the rev recovery from stabs of the throttle were amazing! that thing roared like a lion...
Hey Andy, what would be the formula for new cal VE to generate new VEs not running in closed loop? I assume Afr table would need to be set to, say, 13:1 across the board too do so. Im using a power vision with wide bands to log data on harley stuff. Thanks for your time putting these videos together.
Hi Andy. Thanks for show these videos, they are really useful. But I have doubt about histogram views in MegaLogViewer HD, how can I observe minimum, maximum and/or average values of an histogram cell? Thanks,
Hi andy thanks for putting these shows together they are really useful. I have a Honda EN4 engine with a micro squirt firing a wasted spark coil pack. I have TPS CLT MAT O2 and a 36-1crank sensor. In the future I have got for Yamaha R6 throttle bodies for it but at the moment I'm running the original keihin carbs which im working on gettting dialed in. Is there anything i do with my data logs to help tuning my spark table Cheers Dan
Ive put them up on the ms extra forum tuning section have to cut the logs down to get them under the 1mb limit. Happy to send you much longer logs. Dan
i played with Alpha-N on my turbo 4 cylinder before and man, the rev recovery from stabs of the throttle were amazing! that thing roared like a lion...
Amazing stuff. Your videos really clarify a lot. Great work.
Hey Andy, what would be the formula for new cal VE to generate new VEs not running in closed loop? I assume Afr table would need to be set to, say, 13:1 across the board too do so. Im using a power vision with wide bands to log data on harley stuff. Thanks for your time putting these videos together.
In the Harley world, use (VE Front) * (AFR that you got)/(AFR Target) to get (VE New)
This stuff is going to come in handy for building a map based ve and spark table as a failsafe/redudcancy for if/when my tps gives out
Hi Andy. Thanks for show these videos, they are really useful. But I have doubt about histogram views in MegaLogViewer HD, how can I observe minimum, maximum and/or average values of an histogram cell? Thanks,
Any way to get the histogram to show min or max values vs just average?
Hi andy thanks for putting these shows together they are really useful. I have a Honda EN4 engine with a micro squirt firing a wasted spark coil pack.
I have TPS CLT MAT O2 and a 36-1crank sensor. In the future I have got for Yamaha R6 throttle bodies for it but at the moment I'm running the original keihin carbs which im working on gettting dialed in. Is there anything i do with my data logs to help tuning my spark table
Cheers Dan
It depends what's in the logs. RPM, MAP, AFR., Spark Advance...?
The tuner studio Logs have everything and i can pull spark tables too. Anything else i need?
Just do a fairly long log and post it up on the internet. Post a link to it here and lets see what you are getting.
Ive put them up on the ms extra forum tuning section have to cut the logs down to get them under the 1mb limit. Happy to send you much longer logs.
Dan
www.msextra.com/forums/viewtopic.php?f=134&t=67794