Maraming salamat sa effort mo na magcontent ng ganitong gawain lakay, karagdagang kaalaman nanaman ito, may tanong lang ako lakay, ano ang name ng mga clutch layer mula sa output shaft hngang bago mag oil pump?
Sir, ang galing mo. Napansin ko parang ang lahat ng thread ay pakaliwa, pakaliwa ang pahigpit ng tornilyo sir? Sa automatic transmission. Salamat sa vlog mo sir.
Thank for videos. Great work. Could you please activate the subtitles?..in spanish or english ass possible. About that A750F, what was the problem? Only vibration at 50 speed? Only cleaning and changed the orings?? What about the valve body?..SL1, SL2..etc are all correct? Thank you
@@ararlakayvlog2684 hi! The subtitles could be activated in your youtube channel using “youtube studio” in the pc. You have to do it video by video. Thank you again. Your work is very usefull!
I HAVE A PROBLEM WITH MY TERRANO IT'S AUTOMATIC TRANSMISSION IF I PUT ON D (DRIVE) THEN ACCELERATE IT'S VERY LATE FOR SHIFTING ESPECIALLY ON TRAFFIC IF YOU PUT ON P OR N THEN PUT BACK ON D THEN ACCELERATE IT FEELS THE DISC WAS SLIDE ITS HIGH ACCELARATION BUT MOVES SLOWLY.KINDLY HELP ME FOR THIS PROBLEM. THANKS
Hi friend, my A343F transmission is new before a full rebuild, but now it is overheating when upping hill for a long time in 3 or D. I have use ATF VI on it, do you have ideia what to check? Thanks
Lakay good morning tanong ko lang ayaw nang gumana Ang automatic transmission ng aking sasakyan Toyota Revo model 2000,ayaw na gumana sa reverse at sa drive,ipinarada ko lang sa garage tapos nagpalit ako ng gulong,at disc, brake,tapos pag start ko parang may nag grind di na sya mag reverse at drive.ano kaya dahilan bakit ayaw na gumana.
Hi, I’m rebuilding a A750F and stuck with a problem. Car gets over race on the 2nd and 5th gear. Exactly at 14:54 minutes in the video you’re putting 5 pressure plates and 4 clutch plates, tried doing it but then the upper piston doesn’t fits in its place.. If I put 3 clutch plates and 4 pressure plates, the upper piston fits at its place but there’s no place for the movement of the clutch plates. Less than 1/2 centimetres. Can you please help me out…😢
Peace be upon you. I am from Libya. I have a 2008 Tundra. I have a problem with the gearbox, p2714 and p0776. Knowing that, I want to fully serve the electrical part, solonide, and the paddy. I have a delay in the d and a bump at a speed of 30 to 40 miles with the fourth march. What is the problem and where are the faults? Is the clutch or the valve?
@@ararlakayvlog2684 The clutches when we opened the valve, they all seemed to move as if there were spaces between them, maybe burned, maybe not, because the oil was black and smelled not good.
@@ararlakayvlog2684 Greetings to you from Libya, and we invite you to visit us, and I am a fan of the work you help people with to fix Toyota Tundra breakdowns.
Hello The patient is my gx460 A760F box. I changed the oil in the gearbox about 5000 km ago, everything was ok, trip to Italy. Suddenly, on a driveway (gearbox on D), up a hill of about 15 degrees, the car does not stop uphill but slides down, the ESP light comes on and the car brakes. When I turn on the reducer, the problem does not occur even at a much larger angle. Of course, original oil, oil condition checked. There are no errors on the computer. I checked the new filter was installed correctly. Does anyone have an idea? Yes, the gearbox works normally, changes gears, pulls perfectly normally, the car has power.
fantastic video sir, just a quick one please, must i always measure the thicknesses of the frictions and steels with a vernier caliper before putting them on the transmission. thanks
Hi sir Ar ar ask ko Lang po possibile ba my sira sa valve body pag no error codes sa obd. Tpos no drive no reverse pag nag init na.new subscriber po. Thank you
Hello Boss.Pg malamig nkatakbo pero pg mainit na No R no D na.wala yan sa valve body.either sunog ang Forward clutch or Sira ang Torque Converter Boss.I check ang oil pg sunog overhaul n.Youre welcome.
Idol itutuloy ko yung keento sa santa fe. Binaklas nila ulit at chi neck yung oil seal. Sabi ng mechanic ok naman daw oil seal tas nasemble ulit at pina start me tagas parin daw. Since bag oil seal at original di na pinalitan. San kaya nangagaling yun leak any idea sir ar ar?
Kung ok ang oil Seal .bka sira yung pinaka bushing sa OilPump or Bearing nya.malapit sa oilseal. pangalawa sa mismo torque converter yung welding nya minsan dyan ang leaking boss.
@@ararlakayvlog2684 idol kahapon bumili uli ako oil seal at ganoon parin me leak. Sabi ng chief mechanic me tama na daw yung oil pump.. ok naman daw torque inverter wala daw leak
Possible Boss.Yun din ang suspect ko kc pg maluwag n yung Bushing o Bearing Kahit mgpalit k ng oilseal tatagas pa rin.Hindi ko lamg alam kung buo papalitan kasama ang Bellhousing nya o hiwalay ang pump.Pag bushing type pwede i pa machine yan Boss.kunin lng yung Diameter ng converter.
Awesome video buddy...i'm in process to do the same thing on my a750f gearbox.
Thank you so much..Enjoy Watching .😁
Great video! from Kazakhstan 🇰🇿
Thabk you Sir.
Thank you for your video.
Salamat sa Tutorial Master 🙏
Youre Welcome Boss.🙏
Maraming salamat sa effort mo na magcontent ng ganitong gawain lakay, karagdagang kaalaman nanaman ito, may tanong lang ako lakay, ano ang name ng mga clutch layer mula sa output shaft hngang bago mag oil pump?
Nice greetings my friend
The best ka talaga lakay.
Salamat po hehe.
Sir please I want to learn this your work
You learn a lot from my Videos Sir .Enjoy watching
Nice work! I am from Russia🇷🇺
Thank you Sir .Enjoy watching😘😘😘
Galing mo idol
Salamat po.😁
I love you so much
Tanx for the top videos I am really interesting in doing it like to know the reason these transmissions fail
Vibration at 50 speed prh .only changing all rubber Orings.
شكرا لك استفدت منك في تركيب كشنتي
Hi friend at 31:54 are those 3 oil holes ment to align up clutch engaging but oil hole not visible a750f
Sir, ang galing mo. Napansin ko parang ang lahat ng thread ay pakaliwa, pakaliwa ang pahigpit ng tornilyo sir? Sa automatic transmission. Salamat sa vlog mo sir.
Thank you..front Cam kc gamit ko kya yung pahigpit prang paluwag hehe.
Genius very difficult build
Thank you ..Thats True... only by Gods Grace and help i can.☝☝☝
Boss ar ar , tanong ko lang sa pajero 4d56 automatic transmission ni rebuild ko isa lang ba rotation sa likod hindi ba sya mag rotate pakaliwa
Dpat naikot pati pakaliwa.bka may nka tukod sa loob.
Thank for videos. Great work.
Could you please activate the subtitles?..in spanish or english ass possible.
About that A750F, what was the problem? Only vibration at 50 speed? Only cleaning and changed the orings??
What about the valve body?..SL1, SL2..etc are all correct?
Thank you
Im sory i dont know how to put Subtitle.if there is no Trouble code return the valve body and solenoid.Only change Rubber and Torque Converter.
@@ararlakayvlog2684 hi! The subtitles could be activated in your youtube channel using “youtube studio” in the pc. You have to do it video by video. Thank you again. Your work is very usefull!
Thanks for the info Brother .I'll try to find later .
I HAVE A PROBLEM WITH MY TERRANO IT'S AUTOMATIC TRANSMISSION IF I PUT ON D (DRIVE) THEN ACCELERATE IT'S VERY LATE FOR SHIFTING ESPECIALLY ON TRAFFIC IF YOU PUT ON P OR N THEN PUT BACK ON D THEN ACCELERATE IT FEELS THE DISC WAS SLIDE ITS HIGH ACCELARATION BUT MOVES SLOWLY.KINDLY HELP ME FOR THIS PROBLEM. THANKS
Something damage inside the trsnsmission need to rebuild.
👍👍👍
👍👍
Hi friend, my A343F transmission is new before a full rebuild, but now it is overheating when upping hill for a long time in 3 or D. I have use ATF VI on it, do you have ideia what to check? Thanks
agbalin maala ti facebook ken messenger mo idol... agboyboya ak ti video ita..... adda lallo ni father ko, sumakabilang bahay... jeje
Sure ..Arnold Agluba May Wings Boss.
Hello brother
Hi
Hello ser ji I am mechanic diesel and petrol car please job me ser ji you help i am form India uttarpardesh
Pareho ba Yan SA fortunes idol first time no mag overhaul
Halos ganyan din boss.meron lng konting kaibahan.
@@ararlakayvlog2684 salamat idol
Lakay good morning tanong ko lang ayaw nang gumana Ang automatic transmission ng aking sasakyan Toyota Revo model 2000,ayaw na gumana sa reverse at sa drive,ipinarada ko lang sa garage tapos nagpalit ako ng gulong,at disc, brake,tapos pag start ko parang may nag grind di na sya mag reverse at drive.ano kaya dahilan bakit ayaw na gumana.
Possible Transmission oilpump ang sira. maaaring bumigay at nabasag kya ayaw mg RAndD. Need i baba ang tranny boss.
Thank you lakay
Boss meron k video ng A340H automatic transmission rebulid
Wala yta boss.nung hindi p ako ng vlog yan ang mga una kong ginagawa dati.puro new model n kc ngsun.
Hi, I’m rebuilding a A750F and stuck with a problem. Car gets over race on the 2nd and 5th gear. Exactly at 14:54 minutes in the video you’re putting 5 pressure plates and 4 clutch plates, tried doing it but then the upper piston doesn’t fits in its place.. If I put 3 clutch plates and 4 pressure plates, the upper piston fits at its place but there’s no place for the movement of the clutch plates. Less than 1/2 centimetres. Can you please help me out…😢
Peace be upon you. I am from Libya. I have a 2008 Tundra. I have a problem with the gearbox, p2714 and p0776. Knowing that, I want to fully serve the electrical part, solonide, and the paddy. I have a delay in the d and a bump at a speed of 30 to 40 miles with the fourth march. What is the problem and where are the faults? Is the clutch or the valve?
Maybe burn clutch .need to open the transmission.
@@ararlakayvlog2684 The clutches when we opened the valve, they all seemed to move as if there were spaces between them, maybe burned, maybe not, because the oil was black and smelled not good.
@@ararlakayvlog2684 Greetings to you from Libya, and we invite you to visit us, and I am a fan of the work you help people with to fix Toyota Tundra breakdowns.
Smell not Good meaning some clutch burn inside .
Thank you so much Sir.
Hello
The patient is my gx460 A760F box. I changed the oil in the gearbox about 5000 km ago, everything was ok, trip to Italy.
Suddenly, on a driveway (gearbox on D), up a hill of about 15 degrees, the car does not stop uphill but slides down, the ESP light comes on and the car brakes. When I turn on the reducer, the problem does not occur even at a much larger angle. Of course, original oil, oil condition checked. There are no errors on the computer. I checked the new filter was installed correctly. Does anyone have an idea? Yes, the gearbox works normally, changes gears, pulls perfectly normally, the car has power.
Saan po shop nyo Meron Ako A650 transmission na papagawa
So, where exactly was the actual problem with vibration in the 5th gear?
Idol bagal mag ikot ng output shaft ng aw30-40LE ano kaya issue nito?
No power yan Boss.may problema n sa loob .i check ang oil kung sunog .pg sunog need i overhsul or palit transmission.
fantastic video sir, just a quick one please, must i always measure the thicknesses of the frictions and steels with a vernier caliper before putting them on the transmission. thanks
No need Sir.only check the gap if big or small clearance.small clearance is better than big.
@@ararlakayvlog2684 thanks a lot sir and God Bless you
Nice greetings my friend
I want to come there for studding may l excepted?
Should I change auto oil 100k klms a750f toyota 4wd I did transfer case yes
Yes Sir...Including the Filter and Oilpan gasket.
How often
Go to the near Shop for sevicing Sir.
@@ararlakayvlog2684 I am a mechanic how many klms between changes, English is bad sorry
Every 100k km sir
Ano cra pag cra torconverter
Lakay ano trabaho ng 7 friction plates na nauna mong nilagay compared sa nahuli?
Parehas lng lhat ng gamit yan boss.
Ang galing Subcribe na pare Daan kadin sa aking Bahay 🙏
Thank you...Sure boss👍😁
Hi sir Ar ar ask ko Lang po possibile ba my sira sa valve body pag no error codes sa obd. Tpos no drive no reverse pag nag init na.new subscriber po. Thank you
Hello Boss.Pg malamig nkatakbo pero pg mainit na No R no D na.wala yan sa valve body.either sunog ang Forward clutch or Sira ang Torque Converter Boss.I check ang oil pg sunog overhaul n.Youre welcome.
@@ararlakayvlog2684 ok po sir maraming salamat po.papa overhaul ko na po yung sasakyan ko.
Idol itutuloy ko yung keento sa santa fe. Binaklas nila ulit at chi neck yung oil seal. Sabi ng mechanic ok naman daw oil seal tas nasemble ulit at pina start me tagas parin daw. Since bag oil seal at original di na pinalitan. San kaya nangagaling yun leak any idea sir ar ar?
Kung ok ang oil Seal .bka sira yung pinaka bushing sa OilPump or Bearing nya.malapit sa oilseal. pangalawa sa mismo torque converter yung welding nya minsan dyan ang leaking boss.
@@ararlakayvlog2684 idol kahapon bumili uli ako oil seal at ganoon parin me leak. Sabi ng chief mechanic me tama na daw yung oil pump.. ok naman daw torque inverter wala daw leak
Possible Boss.Yun din ang suspect ko kc pg maluwag n yung Bushing o Bearing Kahit mgpalit k ng oilseal tatagas pa rin.Hindi ko lamg alam kung buo papalitan kasama ang Bellhousing nya o hiwalay ang pump.Pag bushing type pwede i pa machine yan Boss.kunin lng yung Diameter ng converter.
@@ararlakayvlog2684 separate po nabibili ang oil pump assembly. Me messenger ka bosing pakita ko diagram sa yo
Arnold Agluba .may Wings
هل هذا جير تندرا
video mirror
Amigo y colega leboi apreguntar sobre una faya q tengo en una trasmisión automaticaa750e en el cambio d 4 aa 5 mease un deslisamiento
What city are you from?
Im from the Philippines but im Working here in Riyadh Saudi Arabia as a Automatic transmission Especialist.
Thanks!!!
I wish you good luck!
Sankyo
Trasmision qui ne mâche pas arrive qui est ce que le problem
Bos lakay baka pwede mo ako matulungan o bigyan ng idea, kasi may ginagawa kami isuzu 4ja1 walang drive walang drive 2 salamat po.
Mechanical failure yan boss .i check ang loob.maaaring may sunog n clutch
Pasagot boss .ar ar
Hi friend at 31:54 are those 3 oil holes ment to align up clutch engaging but oil hole not visible a750f