E92 Power Steering Reservoir Replacement + Fluid Flush! QUICK!
ฝัง
- เผยแพร่เมื่อ 19 ก.ย. 2024
- In this video I will be showing you the process to changing the power steering fluid and reservoir. The reason we change the reservoir is because it houses the filter for the power steering system which can get clogged over time. I used CHF 11S fluid for my non active steering setup. You only need one bottle of fluid to do a drain and fill.
Follow me on instagram @freeheadgasket
Link to Apparel: free-head-gask...
Thanks for watching, please SMASH the LIKE and SUBSCRIBE button if this video helped you out.
The following links are affiliate links; I may receive a commission if you purchase through these links. Thank you!
CHF 11S Power Steering Fluid - amzn.to/40Fyzj8
Mann oil filter for BMW 335i - amzn.to/3smJrFW
Motul 8100 5w-40 oil for BMW - amzn.to/3FXzUrR
BMW N54 oil filter cap wrench - amzn.to/47OK8XF
E92 Power Steering Fluid Resevoir - amzn.to/3MTlMno
Those BMW hose clamps are killer without the crimping tool. Took forever to figure it out but I was able to get it on with a wrench and a screw driver flat against the little bump in the middle of the clamp area and the raised notch on the other side.
thanks for video, I read and watch video's they many break the clamps to remove them from the hose. I am glad that you verified and confirmed that the hose clamps are reusable. I read there is a special plier that is design for that special clamp.
Yes the clamps are reusable but you need the special pliers. I tried reusing the clamps with a regular set of linesman and needle nose pliers but neither got the job done. It was very frustrating. Happy wrenching! 👍
Thanks Calvin. I'm going to be changing out my rack for an m3 rack today, and figured I might as well flush my system & replace the reservoir dogs.
Good luck on the flush!
@@Calvinm It went well! Brand New 335i tie rods & boots too! Highly recommend this mod. Car feels very tight & like a new car. Quicker steering ratio is amazing.
@@qx4n9e1xpim little late but how much did this cost you?
@@Tomtsu bought a perfectly good m3 rack from a rear-ended m3 at a local scrapyard for $340, and tie rods & boots, I forgot how much they cost, but just look up oem 335i/135i new on fcpeuro. A new ps reservoir & chf11 fluid were cheap. ($40 fluid & $25 reservoir, both of which will outlast my ownership of the car, )
Thanks my filter is leaking and was iffy about the clamps. Going to order this right away :)
Good job Calvin
for my hyundai azera i learned very late that this forgotten steering fluid reservoir have built in filter! & when it's clogged it causes poor stability or some times dangerous drive! i was pulling my hair to figure out the cause unstable steering my car! by the way all you need to drain the fluid is from the return pipe of the reservoir then turning the steering wheel repeatedly both ways untill it drained out
did the same thing, now i get fault code and flat tire code
Nice Video. One problem though, you said you were going to flush the system, but you only drained it. What is the DIY process for completely flushing before putting in new fluid? otherwise you can be left with metallic sluff that will continue to ware the system.
The way I do it is remove the return line from reservoir and plug up reservoir. Route return line into a pan. Then turn wheel (front jacked up) until res is empty, add fluid, repeat until clear fluid comes out.
My whole system broke after just a drain $4000 for new rack and pump :(
Hey mate I followed this and done my own flush and change. Now I'm getting codes for sas and dsc tried everything callibration etc won't work any ideas ?
Thanks so much! So much help 🤤🤤🤤
MINE IS X5 2011 AND STEERING IS HEAVY,AMERICAN VERSION,I THINK IT NEED SOME CHANGES ON PML CODING I THINK SOO,HAVE U EVER FIND UR SELF IN SAME SITUATION?
Awesome car man!
Thanks!
What happened to the green ring on the cap of the replacement reservoir?
How did you get those hoses off so easy, the bottom one is stuck on mine and I can’t seem to pull it off!
Mine were very tough to get off too. Try twisting the reservoir while holding the hose to break the grip it has on the plastic. Or put a slim screw driver down the edge of the hose to separate it from the plastic fitting. Good luck!
@@Calvinm mannn, literally what I did down to a T, it worked but your video really helped out, thank you !
What size are the clamps and how much fluid did you use?
The claps were 20-35mm diameter range I believe. I used one litre in this video.
Thanks
Like your content. Please change your name to crouching man
😂😂😂 love this!
Did you use jack pads for bmw?
Nope. Would be kind to the car to use them though.
What headlights are those?
Oem xenon hid headlights
@@Calvinm dang must just be the newer style. My 08 335 headlights do not look nearly as good lol
Why u need to change the reservoir?
Because it has a filter inside it which can become clogged and restrict flow to the power steering system.
OK ,OFCOURSE U CAN FOR THIS REASON,@@Calvinm
Would this be why the whining noise is there when accelerating or coming to a stop?
I’m not lifting the car up just for a top up