Thanks Corey. Just completed this. Great step by step video and detailed dissection of the parts. Doesn't need to be a fancy production video. It did the job. The Toyota dealer near me wanted $200 CDN for the check strap and another $200 for a mechanic to install it. Savage robbery. Saved me a lot of money with this DIY. Went with the similar strap off of Amazon. Will see how long it'll last. One thing that was different on mine, was when you unplug that electrical block from the window controls. Mine took more time to get out. But when putting it back in, there's a plastic inner latch inside the block that is in the way of it reconnecting. There's two parts to the block. There's a slider piece on the outside of the block that has to be slid all the way out/down for that inner latch to make a clear path in that one hole for that rejoining to happen. Just in case anyone else comes across this scenario. Other than that, all the pieces were the same. Cheers
Thanks fixed my 2019 limited tundra on drivers door. I would recommend locktight for that 10mm to frame and stop. Look like it had some on it upon removing.
Thank you for this video. This helped me fix my 2017 Toyota Tundra. You’re the best!
Thanks Corey. Just completed this. Great step by step video and detailed dissection of the parts. Doesn't need to be a fancy production video. It did the job. The Toyota dealer near me wanted $200 CDN for the check strap and another $200 for a mechanic to install it. Savage robbery. Saved me a lot of money with this DIY. Went with the similar strap off of Amazon. Will see how long it'll last. One thing that was different on mine, was when you unplug that electrical block from the window controls. Mine took more time to get out. But when putting it back in, there's a plastic inner latch inside the block that is in the way of it reconnecting. There's two parts to the block. There's a slider piece on the outside of the block that has to be slid all the way out/down for that inner latch to make a clear path in that one hole for that rejoining to happen. Just in case anyone else comes across this scenario. Other than that, all the pieces were the same. Cheers
Thanks for sharing that. I'm glad you saved money, 400 sounds obscene for this repair.
Part link?
I'll be replacing that on my 2013 Tundra. Thanks for taking the guess work out of the project!
Super helpful! Thanks for showing which way to pull specific panels off.
30 minute fix on a 2013 Sequoia. Thanks!
Thank you for your really good attention to details and explaining them. Wonderful Video. Very helpful.
Thanks to you I did this successfully too!
Thanks for the video. I would’ve never found the screw behind the door lever trim.
Great job from a beginner
Thanks, bruh! my tundra door does the same thing. I will get an OEM one and install it. Thank you for sharing, you have a new sub here.
Thanks fixed my 2019 limited tundra on drivers door. I would recommend locktight for that 10mm to frame and stop. Look like it had some on it upon removing.
Thank you this video help me
Thank you 👍
Is the same for all 4 doors.
Do you have a part link?
OEM is $ 96 and you still get cheap plastic, wtf my 88' SRA 4x4 is metal has never broke and I treat terible too.
Dude great video! Infirmation and step by step. Helped me
Looks like a lot of work.