unboxing and test 120A BRUSHLESS ESC totally strong!!
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- In this video, I just want to share my RC for everyone.
Hope you enjoy, If have any questions please comment down below.
Music by : Vlog No Copyright Music
Ikson - Paradise (Vlog No Copyright Music)
• Ikson - Paradise (Vlog...
I owned this esc and the tsky 120A, which has the similar case but different innards... I swapped the cap with zlh 560uf (similar footprint), use external BEC for power hungry servos (since the bec only capable of supplying 1 amp), and desolder the power cable (red cable) on the servo cable (on the tsky esc), since the hobbywing usblink works fine without 5V power from the esc...
I bought a couple of this from eBay, seller had posted the TSky ESC in one of the pics. I returned them immediately since it didn’t have a button for throttle calibration, and the Hobbywing programmer card I have didn’t work, unlike on a TSky.
Excellent video! Please let me know if the following components listed below will be good for my heavy rock climber, thank you again and keep up the great work!
- RJ Speed R/C Legends Chassis Kit (RJS2012)
- Tamiya 54358 RS-540 Brushless Torque-- Tuned Motor (10A - 7.2 Volts)
- GoolRC 120A Brushless ESC Waterproof Electric Speed Controller (120A - 7.4Volts)
(Connection: Yellow to yellow & blue to green on motor; Orange not used)
- Flysky FS-i4 AFHDS 2A 2.4GHz 4CH Radio System Transmitter
- Flysky FS-A6 Receiver
- Smraza 45KG Servo Motor Steering High Torque (5Volts - 8.4 Volts)
- Smraza HV 8.4V Coreless Waterproof Digital Servo
- 72 Tooth 48 Pitch Spur Gear
- 12 Tooth 48 Pitch Pinion Gear
I have the same esc don’t need program just plug it in and it works no issues
Depending on the intended use, yes programming would be necessary for some.
Is the motor wiring the same as hobbywing? There are no ABC decals to show how to wire the motor.
cool esc and run
Thanks
if you enjoyed this video please give me a like, share and subscribe
These are mass sold by many stores. They are not programmable. So you’ll have to be happy with whatever factory settings yours was programmed with.
The esc didn't last long on my 4s 1:10 crawler the 120 Amp esc is constantly beeping and also the programming card doesn't light up anymore plus the cooling fan doesn't do sh. I didn't overload the esc but it cut out out of nothing. It's from a very poor quality this esc
how to kalibrasi esc for receiver?
Hallo, Tel me how to programm this ESC, Thanks
Idk how to earth
Its a hit or miss on these kind of esc and the program card that works with these is not the Hobbywing all others work I believe
Hi! I had this esc and a 3650 4300kv motor. The motor is beeping constantly after using a 3s; fan does not start. No lights bliking. Which error could be?
This could be some programming problem.
3s only with bigger fan
any solution for that beeping? it happening for me also
Recommended esc is it?
please, how TF do you recalibrate the throttle with this ESC? There is no button or anything for it to do it the normal way. Anyone else know the answer?
Motor 3660 yes
I have the same esc and 3900kv motor and my rc start cogging with this bl esc and motor
Same but thats it only but do you drive on 3s ? And im gonna ride tomorrow for a fast run and i wanna know if its catch on fire or not i use 1500 3s
Recommend for using 3s battery?
Yes
wish somebody could please upload a video on programming this esc on each setting most of the time these purchases do not come with a user manual
Get the black card
I tried 5 different cards. Won’t recognize any.
@@kloudkreeper mine do
I brought this esc and motor and put it in the same rc car but mine is cogging really bad even after i have reprogrammed it how did u get urs to run so smooth?
I’m having the same issue. On top of that the motor or the esc is beeping sometimes I get lucky and it works but my guess is tgat it’s the mesh maybe we need a adjustable motor mount if yours don’t have one it could also be the pinion gear size to motor kv ratio. 🤦🏽♂️ lot of work ahead mate 😂
I have exact same. Does it need to be programmed first? It barely works in my recent video..
It would be much better if you want to program first, but it can also be done without programming because esc is already have this function. Tq
@@hosrc5671 so I just got a bad one. I hooked up a 60amp and everything works
@@hosrc5671 thanks 😊
@@hosrc5671 would you say this sensorless 120amp esc seems kind small for a 120amp?.
@@ChiefRickyRC not really small but for me is ok
And I wouldn't go hire then 3s on these without programming them
Looks like better than the Problematic GoolRc 60A 3650 /4300kv Esc
I bought that combo. Is it the motor or esc that is causing the motor to stutter?
@@jamesputman4941 it's the esc actually... I moved on from GoolRc, and bought a surpass hobby motor with esc, it has a nice performance for budget rc motor with esc
use 2s or 3s?
Both of it I already try. Of course 3s is more powerful
Can these esc be used to go backwards and forwards
Yess
Cepat panas takk.....motor pakai brapa kv
The esc did not get hot because it have cooling fan on the top there. The motor I use 4300kv. Thanks for your comment
Thank you broo
Esc ni boleh combo dgn motor surpass ke?
ya can
How to calibration the esc?🙏
Can’t. Tried 5 different cards. None would recognize this esc.
Price?
macam mana nak calibrate esc ni yee ?
You use the programming to program it, this will be much stable and much stronger
@@hosrc5671 but how
Yo tengo ese mismo esc ya hace 3 años
Y va bien, sin problemas
What battery you ran 2s or 3s?
Essas musicas atrapalham para escutar os bips de conecção, alem de estar muito alta.
Can u show me how can i setup esc ? without card ?
It’s plug and play or does urs make a beep sound when on