Hi! Thanks for the video. Does this integration report the position of the shutters correctly? And can it order the module to roll the shutters to a given position (like 50%)?
Hi, yes, both ewelink and home assistant report the position correctly, but first you need to calibrate it as you can see in the video. Of course, you can also set the shutter to whatever position you want in percentages. So far, I didn't have even single problem with shutters that sonoff dual r3 is managing. And I still recommend this product👌
Sure, go to wiring section. 17:21 I'm talking about it how to do it. Important thing is to use the same live cable, or maybe better word will be same phase which you have in your wall switch, you may have even 3 different lives, phases, in your house. So be careful.
@ can I contact you in mail so I can send a video or picture because I’m not really good with this but I really want it. Can you say your email then I will send my question
Can this be set up to close the roller shutter depending on the amount of sunlight which is detected in the room via some sort of extra sensor? And is it possible to mount the Sonoff in the roller case box itself, not behind the wall outlet?
If you don't have Home Assistant only ewelink app which is for Sonoff i can recommend you a motion sensor from Sonoff as it has also a lux sensor so with it you could do such automation. Yes, you can put that close to the shutter but it all depends what wires you do have there - place doesnt matter
Hej! Tak, Sonoff Dual R3 nie (edit) jest natywnie kompatybilny z Apple HomeKit (HK), ale wymaga konfiguracji przez aplikację eWeLink, zanim będzie można go dodać do HomeKit i mostek (edit). Po poprawnej konfiguracji w aplikacji HomeKit powinno być dostępne sterowanie procentowe, czyli możliwość ustawienia rolet w określonym procentowym zakresie otwarcia.
@@Ar-rn5vx Mostek jest potrzebny. Wyszukaj sobie stronę addtohomekit i dasz radę, ja zrezygnowałem z HK na rzecz Home Assistant, polecam. Głupoty napisałem... bo oznacza, że nie jest natywne wsparcie... 🧐
Hah, so buy me few so I will use them :). Never had a problem with sonoff dual r3 for 4 months now. They were always online when I was using Home Assistant. How many shelly do you have? And which versions? Did any break? I lost many.
@@SmartTubeOfficial already lost 5/6 shelly. Ordered 5 new, from that ones that are new in half a year, already lost 1. I'm not buying shelly anymore, if it kills me.
@@tadejbreznik213 sorry to hear that! i lost another one since my video so 3 left from 10. if shelly is not 2 year old you probably have it on warranty so I would ask for new one. Soon I should have a new product from Sonoff which will be even smaller than Shelly 2 and will also be 2 relay switch so stay tuned!
Thanks @smartTube!
Ur welcome!
Hi! Thanks for the video. Does this integration report the position of the shutters correctly? And can it order the module to roll the shutters to a given position (like 50%)?
Hi, yes, both ewelink and home assistant report the position correctly, but first you need to calibrate it as you can see in the video. Of course, you can also set the shutter to whatever position you want in percentages. So far, I didn't have even single problem with shutters that sonoff dual r3 is managing. And I still recommend this product👌
Can you still use your wall switch with this device plugged in
Sure, go to wiring section. 17:21 I'm talking about it how to do it. Important thing is to use the same live cable, or maybe better word will be same phase which you have in your wall switch, you may have even 3 different lives, phases, in your house. So be careful.
@ can I contact you in mail so I can send a video or picture because I’m not really good with this but I really want it. Can you say your email then I will send my question
@sveb12381 you can go to my FB profile and send the message, the link you can find on my channel here
Can this be set up to close the roller shutter depending on the amount of sunlight which is detected in the room via some sort of extra sensor?
And is it possible to mount the Sonoff in the roller case box itself, not behind the wall outlet?
If you don't have Home Assistant only ewelink app which is for Sonoff i can recommend you a motion sensor from Sonoff as it has also a lux sensor so with it you could do such automation. Yes, you can put that close to the shutter but it all depends what wires you do have there - place doesnt matter
Cześć, ten sterownik jest natywny z HK i pokazuje % ?
Hej! Tak, Sonoff Dual R3 nie (edit) jest natywnie kompatybilny z Apple HomeKit (HK), ale wymaga konfiguracji przez aplikację eWeLink, zanim będzie można go dodać do HomeKit i mostek (edit). Po poprawnej konfiguracji w aplikacji HomeKit powinno być dostępne sterowanie procentowe, czyli możliwość ustawienia rolet w określonym procentowym zakresie otwarcia.
@ dziękuję, ale sterowanie w aplikacji dom jest możliwe? Czy bramkę należy kupować ?
@@Ar-rn5vx Mostek jest potrzebny. Wyszukaj sobie stronę addtohomekit i dasz radę, ja zrezygnowałem z HK na rzecz Home Assistant, polecam. Głupoty napisałem... bo oznacza, że nie jest natywne wsparcie... 🧐
But for zigbee ? Maybe I don't want wifi
Hi, please go to video description you can find link to some zigbee devices that will control your roller shutters. Good luck! Thanks.
they keep disconnecting from wifi unlike shelly. Go for shelly, forget son off
Hah, so buy me few so I will use them :). Never had a problem with sonoff dual r3 for 4 months now. They were always online when I was using Home Assistant. How many shelly do you have? And which versions? Did any break? I lost many.
@@SmartTubeOfficial already lost 5/6 shelly. Ordered 5 new, from that ones that are new in half a year, already lost 1. I'm not buying shelly anymore, if it kills me.
@@tadejbreznik213 sorry to hear that! i lost another one since my video so 3 left from 10. if shelly is not 2 year old you probably have it on warranty so I would ask for new one. Soon I should have a new product from Sonoff which will be even smaller than Shelly 2 and will also be 2 relay switch so stay tuned!
@@SmartTubeOfficial if its the same size as shelly, i’m replacing all of them. Currently it wont’t fit into the socket hole :/