Earl try aero kroil in aviation we always use it to loosen engine mounts and seized boroscope plugs on combustion chamber it will literally loosen anything cheers bro love ur awesome videos !
68mph? With the the speed pinion? On the street? Stock system? If that's the case, you wouldn't have be able to bash with it with the stock system. It would probably burn up. The 8s system would need a bigger pinion to get more speed off road.
Arrma must ensure better quality control over their vehicles at the factory. They have to stay on top of the factory assembly, to make sure they are NOT too generous with that darn Loctite.
I burned out my soldering iron on the Kraton 8s it ended up ruining my soldering tip that I just repaired this week I wasn’t able to solder anything I thought I ruined the whole unit luckily it was just a tip 👍👍💯💯🔥🔥🔥🔥
That's insane the amount of loctite used, which is strange when companies usually skimp to save money. The next question what's the old set up going into then? 😂 😂 Great video 😀👍
Yes possible but the Mojave’s diffs are pretty strong 💪 long as I don’t power off landing they should last 100 💯 if I can take a 4s and put it on 6s with those little outcast diffs I might make them last lmao 🤣😉😉😇😇😇
I cant even remove my diff pin cause the grub to the cups leaked threw my bearings and only had it a month with 3 runs nothing serious want to swap bearings and a few things especially the never loose saver for a hot racing one and strip one of the top screws for the brace like wtf arrma! First car from you guy kinda upset
Awesome like always the paint is adorable
Good old American red white and blue with silver added for style 👍💯🔥🔥🔥
Earl Moorhead i love it
UAE RC ADDICTS thanks 🙏
Earl try aero kroil in aviation we always use it to loosen engine mounts and seized boroscope plugs on combustion chamber it will literally loosen anything cheers bro love ur awesome videos !
Thank you 🙏 where can I find that stuff ??
That's going to be a Rocket Earl brother, stay safe
It is for sure the new video shows the amazing rc it is appreciate the support brother stay safe as well 💪👍💯🔥🔥
@@earlmoorhead5555 Hooah brother
🙏🙏🔥🔥🔥🔥
That's going to be insane 👍 I layered up some Gorilla tape to reinforce the roof of the body
That’s a great idea 👍💯🔥🔥🔥
My favorite time of the day🔥🔥🔥
Mine to the kids are asleep lmao 🤣💯💯🔥🔥🔥
Earl Moorhead lol
now that is what i call recycling at its finest . I like your style Earl ✌️rcfam4life
Thanks 🙏
I don’t know if I should get this or the traxxas udr because they both are 6s but this is cheaper. Also just wondering what tools do you use?
I use MIP and extreme rc precision for my Allen bolts 👍💯🔥🔥🔥🔥
Thanks becuase I just have the stock tools that come with rtrs and I am starting to get into the hobby a bit more.
Razr Cageogic wry cool 😎 if you go to extreme rc precision let them know I sent you they will take care of you 💯💯🔥🔥🔥🔥
Razr Cageogic www.extremercprecision.com/products/rjx-5-in1-hex-screwdrivers-for-rc-car-helicopter-fpv/?cookies_accepted=Y
Currently doing this to my Mojave, seems like the ESC is gonna be a pain to fit in there right
Going to be a beast 🔥🔥
I hope 🤞 so 👍👍💯💯🔥🔥🔥
Thats what im talking about earl that thing is going to run like it was made for it trust me
Ohh it ran alright for 8 minutes lmao 🤣
What batteries do you recommend for a stock Mojave
I use lectron pro 50 c batteries they work great and don’t cost a fortune 💯💯🔥🔥🔥🔥
Earl Moorhead thanks very much, love the channel
Mine runs 55mph with the 8s & 22t pinion, it was running 68mph on 6s. What's wrong here?
68mph? With the the speed pinion? On the street? Stock system? If that's the case, you wouldn't have be able to bash with it with the stock system. It would probably burn up. The 8s system would need a bigger pinion to get more speed off road.
Arrma must ensure better quality control over their vehicles at the factory. They have to stay on top of the factory assembly, to make sure they are NOT too generous with that darn Loctite.
So true crazy 😜
Yes sir!! More power 🔥
Bigger is better 🤣🤣🤣😎😎🔥🔥🔥🔥🔥🔥👍👍👍👍
Soldering iron works best. Directly on the bolt
I burned out my soldering iron on the Kraton 8s it ended up ruining my soldering tip that I just repaired this week I wasn’t able to solder anything I thought I ruined the whole unit luckily it was just a tip 👍👍💯💯🔥🔥🔥🔥
I think I'm going to invest in loctite sence Arrma uses a gallon on every car 😂😂
Hahahaahah yes stocks going up for sure 🤣
That's insane the amount of loctite used, which is strange when companies usually skimp to save money. The next question what's the old set up going into then? 😂 😂 Great video 😀👍
Crazy a gallon per rc for sure 🤣
@@earlmoorhead5555 looks that way 🤣😂🤣
Solder iron probly wont heat that enough
No it didn’t for sure 👍👍💯💯🔥🔥
I'm taking apart my outcast 6s for the first time and I've got thredlocker in my freaking bearings smh
Wow 😳
Holy lock tight
Yes crazy right lmao 🤣
Earl Moorhead that’s insane how much heat you had to use for that bolt
leo medina right lol the Kraton 8s was the same way on the center diff 😳😳🔥🔥🔥
Earl Moorhead just crazy
I see much diff failure in your future but it'll be fun for a little while.
Yes possible but the Mojave’s diffs are pretty strong 💪 long as I don’t power off landing they should last 100 💯 if I can take a 4s and put it on 6s with those little outcast diffs I might make them last lmao 🤣😉😉😇😇😇
I cant even remove my diff pin cause the grub to the cups leaked threw my bearings and only had it a month with 3 runs nothing serious want to swap bearings and a few things especially the never loose saver for a hot racing one and strip one of the top screws for the brace like wtf arrma! First car from you guy kinda upset
Ya silly little things add up for sure 💯💯🔥🔥🔥
Arrma themsekve said the factory in china is too generous with the threadlock hahah
Yes I remember lol I’ve been paying for it lmao 🤣
Heat that bolt until it turns red
Yes I almost had to lmao 🤣