I've got a Delta EL series VFD that's been in service for a year. It's been and still continues to work flawlessly. However I'd like to change the accel/decel parameters. I'm unable to read or update any parameter. Every parameter reads as zero and any update produces an ERR. An example would be 00.06 which should show the software version, it reads 0. I've tried to update 01.09, 01.10 which should have a default of 10, but show zero. I'm able to change the value to whatever I want, but hitting the enter button to save the value produces an ERR. 00.02 which is the Parameter Reset displays a 0 and like other parameters doesn't allow an update. Does anyone have an idea what is wrong and how to go about correcting it???
I've got a Delta EL series VFD that's been in service for a year. It's been and still continues to work flawlessly.
However I'd like to change the accel/decel parameters.
I'm unable to read or update any parameter. Every parameter reads as zero and any update produces an ERR.
An example would be 00.06 which should show the software version, it reads 0.
I've tried to update 01.09, 01.10 which should have a default of 10, but show zero. I'm able to change the value to whatever I want, but hitting the enter button to save the value produces an ERR.
00.02 which is the Parameter Reset displays a 0 and like other parameters doesn't allow an update.
Does anyone have an idea what is wrong and how to go about correcting it???
Try changing parameters when vfd is in stop mode.
Next, try to reset the vfd to factory setting and then change required parameters.
Hope it helps
Driv me electric connection kaise kare
how to rev direction
Is this on off switch can be used for 3phase vfd ????
I try many times but couldn't reset my EL W drive plz solve this problem
What do you mean "reset"?
How use reverse and forward options in this drive
It can be done by parameter setting. We will discuss about vfd parameters in the next video
Hello
Timer ki application use krne ke liye
External TIMER ka kaise use kr skte he drive ke sath.
If you want to provide delay in starting VFD, then use timer Normally Open contact command in series with VFD start command.
Lenze Drive ka parameter delta me kaiae setting karee
Thank you
22 frequency se niche me motor nhi ghumta uske liye kya kare plz bataiye sir
May be the vfd is not able to power the load at freq. Lower than 22Hz.
One way is to use one rating higher vfd model.
@@starautomation dusri machine me same moddel laga h usme 15 frequency me bhi chalta h.. Delta ms300
Please send me information for rotary switch
Please make a series of videos on this vfd.
Nice
Sir mera meter kam nhi kar rha plz koi uppye batao
If you have connected power and the meter is not powering up, then it is hardware fault in meter and it should be repaired or replaced
Good
nice description
You like it? Thank you
Hello I have a delta which is blocked even to resolve it does not work the problem is or please thank you for the re
Thankអរគុណ👏
Sukriya sri
Welcome
Off Time kam kaise kare
Adjust the parameter named DECELERATION TIME
Sir.dovol ki ac drive ki programing ki video send karo ji
Thanks
Program parameter ka PDF bhej denge sar
Email me
satya.starautomation@gmail.com
👍👍👌
thanks.vfd par or b videos bnae please.
Ok
Video in italiano
Nice video
ph no dijie
please email me your concern
Sir mujhy apka number chahiye mere pass delta ka vfd hy ous ko speed badhani hy