@@SafetyUggs Same in Canada, but they haven't bothered me yet. ( knock on wood) I stay under 20 mph on the city streets . that's the E-bike limit. { Riding motorized bikes on the sidewalk or street is illegal in Canada.)
youtube is really sensitive with links in the comments but if you go to aliexpress and search for "Performence Cylinder Kit 2V 80 for Bicycle Engine F80 47MM 80CC" you'll find it. It's USD$29 plus shipping which is pretty good value for what you get
@@SafetyUggs Thanks. More for curiosity, I'll check it out. Keep up the good work ! My 80cc build hit some major roadblocks with the frame wheel combo so I ended up buying a 1500W ebike
Im interested in those Perpex covers and was hoping you still were doing those? DIY battery listing expired. Those ones i got in green are just amazing and thanks again 😊
Thanks for the real results. Much appreciated. Just built a 69.4cc Mineralli for my full suspension Shoe-horn build. looks like I need a jet kit for my Bofeng carb. Is the case "port matched" to the aluminum spacer? The carb trick: Is it just the outside of the port that is raised?
@@Paul_Gale i didn't port match the transfers and I'm sure there a bit of power that could be had there when I do. The high flow mod is straight through the carb, both sides
Hey man, it'd be great if you do more hybrid builds with different pipes/carbs/porting and what not (such as ported 70cc iron minarelli, athena sport, athena hyper, racing, athena 80 jog, MXS racing jug, piaggio and more) if you can afford it or if someone sends those to you to dyno. It would tell us how much hp it's pushing. I always wondered how much hp my 70cc athena sport actually pushes, I always guessed around 10hp. Depending on what site you buy the jugs from, you can always return them after testing.
Stock exhaust was a flat 1hp, the peak when the pipe hits is ~6hp. The dyno may be reading high or low but it's more just a tool to compare mods and tuning
Right on, I love the numbers. Thanks for sharing.
Bofang power 💪 and math 😊
This is who you want to ask about the perpex covers 😳
@@Jarrod_D designed for the porting... 66/80cc lot of work went into that beyond a box stock kit
Always love a good motorised bike. Good stuff mate!
You finally posted ya!
🙏 stock carburetor runs great on the hybrid I'm going to test with one today after I high flow it maybe I would upload a video later
Lmk if you do and I will check it out
Great work 👏 thanks for sharing your work 👍 🎉🎉🎉🎉
Fun Watching Dyno stuff, 👽👍
It's a shame we can't legally ride these on the road over here :-(
@@SafetyUggs Same in Canada, but they haven't bothered me yet. ( knock on wood) I stay under 20 mph on the city streets . that's the E-bike limit. { Riding motorized bikes on the sidewalk or street is illegal in Canada.)
Great to see you are making videos again :) do you have a link to the Minarelli kit?
youtube is really sensitive with links in the comments but if you go to aliexpress and search for "Performence Cylinder Kit 2V 80 for Bicycle Engine F80 47MM 80CC" you'll find it. It's USD$29 plus shipping which is pretty good value for what you get
@@SafetyUggs Thanks. More for curiosity, I'll check it out. Keep up the good work ! My 80cc build hit some major roadblocks with the frame wheel combo so I ended up buying a 1500W ebike
Great video bro thanks for sharing results
Love the vids
Thanks :-)
@@SafetyUggs most welcome sir
Thanks for the great video 😊
Im interested in those Perpex covers and was hoping you still were doing those? DIY battery listing expired. Those ones i got in green are just amazing and thanks again 😊
Yeah we can do another run of those, I'll put that listing back up next week
@@SafetyUggs ok great I'll look for it then 😊
Thanks for the real results. Much appreciated.
Just built a 69.4cc Mineralli for my full suspension Shoe-horn build.
looks like I need a jet kit for my Bofeng carb.
Is the case "port matched" to the aluminum spacer?
The carb trick: Is it just the outside of the port that is raised?
@@Paul_Gale i didn't port match the transfers and I'm sure there a bit of power that could be had there when I do. The high flow mod is straight through the carb, both sides
Hey man, it'd be great if you do more hybrid builds with different pipes/carbs/porting and what not (such as ported 70cc iron minarelli, athena sport, athena hyper, racing, athena 80 jog, MXS racing jug, piaggio and more) if you can afford it or if someone sends those to you to dyno. It would tell us how much hp it's pushing. I always wondered how much hp my 70cc athena sport actually pushes, I always guessed around 10hp.
Depending on what site you buy the jugs from, you can always return them after testing.
What were the horse power numbers?, can't really tell on the graph
Stock exhaust was a flat 1hp, the peak when the pipe hits is ~6hp. The dyno may be reading high or low but it's more just a tool to compare mods and tuning
I really appreciate how much info you share, and time and effort into your videos, you're a true diy enthusiast.
Wait! What's the carb mod? Can you refer me to where this info is posted?
You mean the info I included in this video? or something else?
Sorry I was distracted when you talked about it my bad.