your wheel lift looks ok ,but it looks as if it has to be welded and not bolted in is this true?if not can u do a video to show how and the angel bracket seem not as strong as the rectangular tubing as on other wheel lift? and do u have a electric pump instead of one going on the motor?
We just manufacture, service and install our units now. We stopped servicing other makes and models a few years ago now. Currently we manufacture in house the Lil Hercules 2.0 and it is a game changer. www.detroitwrecker.com/wp-content/uploads/2020/11/Lil_Herc_Clickable_TOC_Compressed.pdf
That used truck will cost you $4k, 4 months later. That used truck has equipment that has pivot pins that are made to fail, you can't tighten them and they prolly have plastic wear pads too! Those are there ONLY for to buy them annually. There is NO structural purpose for them other than for you to have to keep replacing. The fact they implemented them means your tubes are loose and sloppy unlike our tubes that have ZERO plastics are are tight to each other. Thus resulting in longevity not replacing parts constantly. But if you prefer to buy pins and plastics then your right a used truck is a much better selection.
#LilHerc will work circles around any wrecker body or competitors unit that is similar to ours by far, in regards to duty cycle, lift capacity (10,000lb Tow Capacity, 5,000 Lift Capacity) All wreckers have plastic wear pads for the sole purpose of replacing. There is no structural purpose for lifting/towing a car/truck. The pivot pins are designed to wear out quickly. Thus forcing the end user to buy them annually. None of which is a factor for our clients. Wrecker bodies minimum = $30-40k. Lil Hercules = 16k not installed. Big difference in price and not having to deal with the downtime or replace the costs of pivot pins or plastic wear pads. Plus the fact your driving in a comfortable truck that rides like a sofa not a brick like a wrecker. Not to mention our LH 2.0 now has 5” bore Lift cylinder. That means it’s stronger than any wrecker out there, that’s mounted on a 450-550 chassis. Obviously excluding med duty wreckers that are mounted on F650 of similar chassis. But that’s my point! We are the first to over build the application to this degree. Unlike anyone, anything or anywhere else. We have thicker tubes, bigger cylinders, superior pin system, no wear pads. 🗣 🗣🗣🗣You can’t afford not to have one of our units imo.
gotta pay to play if you want to buy new stuff. u can always buy a clapped out used truck but you will be dealing with repairing it etc... its almost always better to buy nice shit even if its slightly used then trying to buy cheap and having the head ache of repair and down time. I dont even own one just been studying the engineering behind them and Detroit wrecker seems truly like some of the best built shit on the market. much props to those boys they build some dam good shit.
Would you rather I didn't make them at all? Because I do like the music, and will not do a video unless I enjoy it. You can turn the sound off if you'd like?
New Lil Hercules brochure! Click on the link below =)
www.detroitwrecker.com/wp-content/uploads/2020/11/Lil_Herc_Clickable_TOC_Compressed.pdf
The music doesn't bother me. That is a bad ass set up!👍👍👍
Looks like staff take great pride in their work....
Pretty good reinforcement chassis!!!
Mine didn’t come with it
It seems when you add heavy weight how the chassis bends
Love the new bumper
i like the music too. heavier the better.
Thanks for commenting
your wheel lift looks ok ,but it looks as if it has to be welded and not bolted in is this true?if not can u do a video to show how and the angel bracket seem not as strong as the rectangular tubing as on other wheel lift? and do u have a electric pump instead of one going on the motor?
What size plate did you guys install for reinforcement
Buen día,venden los planos para hacer una grúa underlift para ram 2500 año 2011
what brand of unit was that
Do you guys have a trade in program ? I have this same unit
No sir sorry 😞
Do you guys still do these type of installs?
We just manufacture, service and install our units now. We stopped servicing other makes and models a few years ago now. Currently we manufacture in house the Lil Hercules 2.0 and it is a game changer. www.detroitwrecker.com/wp-content/uploads/2020/11/Lil_Herc_Clickable_TOC_Compressed.pdf
flatbed rollback wreckers Ford tow truck blue emergency lights on
How much?
Our unit starts at $25k plus installation or shipping.
Equiment $17000 + *60000 Installation = $24000 Let;s me buy used tow TRUCK is better Crazy price
That used truck will cost you $4k, 4 months later. That used truck has equipment that has pivot pins that are made to fail, you can't tighten them and they prolly have plastic wear pads too! Those are there ONLY for to buy them annually. There is NO structural purpose for them other than for you to have to keep replacing. The fact they implemented them means your tubes are loose and sloppy unlike our tubes that have ZERO plastics are are tight to each other. Thus resulting in longevity not replacing parts constantly. But if you prefer to buy pins and plastics then your right a used truck is a much better selection.
#LilHerc will work circles around any wrecker body or competitors unit that is similar to ours by far, in regards to duty cycle, lift capacity (10,000lb Tow Capacity, 5,000 Lift Capacity)
All wreckers have plastic wear pads for the sole purpose of replacing. There is no structural purpose for lifting/towing a car/truck.
The pivot pins are designed to wear out quickly. Thus forcing the end user to buy them annually. None of which is a factor for our clients.
Wrecker bodies minimum = $30-40k.
Lil Hercules = 16k not installed. Big difference in price and not having to deal with the downtime or replace the costs of pivot pins or plastic wear pads. Plus the fact your driving in a comfortable truck that rides like a sofa not a brick like a wrecker.
Not to mention our LH 2.0 now has 5” bore Lift cylinder.
That means it’s stronger than any wrecker out there, that’s mounted on a 450-550 chassis. Obviously excluding med duty wreckers that are mounted on F650 of similar chassis.
But that’s my point! We are the first to over build the application to this degree. Unlike anyone, anything or anywhere else.
We have thicker tubes, bigger cylinders, superior pin system, no wear pads. 🗣 🗣🗣🗣You can’t afford not to have one of our units imo.
gotta pay to play if you want to buy new stuff. u can always buy a clapped out used truck but you will be dealing with repairing it etc... its almost always better to buy nice shit even if its slightly used then trying to buy cheap and having the head ache of repair and down time. I dont even own one just been studying the engineering behind them and Detroit wrecker seems truly like some of the best built shit on the market. much props to those boys they build some dam good shit.
Bro phone number
313-835-8700
hate the music .....ruins all ur videos...
Would you rather I didn't make them at all? Because I do like the music, and will not do a video unless I enjoy it. You can turn the sound off if you'd like?
snap......lol
The music is fine... I’m more interested in the product.