I had this problem and tried everything..... if you have tried everything then don't despair, if you have the iPad with a mobile sim, take out the sim and try starting up... this worked for me instantly....you don't need to do this.... you will mess up....
Hey up just a heads up if this error keeps happening during restore process what I found to be cause of the problem for me was a faulty charging port it would pick up in iTunes fine however my device had liquid damage from previous owner and things I tried were replacing LCD new battery even removing screen and try restoring it without screen to no avail either error code 9 or 4013 would always appear, however I tried heating the charging port up and progress on restoring was going a bit further than previous attempt, so out of the blue decided on swapping the charging port for a known working 1 and first attempt it booted after restore in iTunes with no error code just thought I'd pass my findings on I'm not saying this will fix everyone's 4013 error but if water ingress has occurred it's a high possibility it's the port ;)
Anh huân cho em hỏi tý. lấy ổ cứng từ main xác thay sang main sống rồi có phải làm gì nữa không anh. hay là phải đổi s/n cho nó trước khi đóng vào main sống hả anh.
bro whats the problem ipad mini changed nand flesh memory but its dfu mode so its showing error4005,4014 do u have any solution for this problem please bro i am waiting for ur replay
That heatsink for RAM is crap. You`re heating the RAM+CPU from above. so the RAM and CPU must get really hot, in order for the heat to transfer to the solder under the CPU.
ram ko có chữa ah.nhiều cây vừa đặt khò là ram sình bụng.cũng chã hiểu.A.huân nghiên cứu dùi lỗ trên ram cho nó xì hơi khỏi phù làm clip cho ae học hỏi;
+Thuan Bui Duc dán cach nhiet lên sẽ hạn chế. Nhung hạn chế đụng chip A vì đâm đầu vào nó chả khác gì lủi vào cột điện trong khi con đường vẩn còn thênh thang.
My iphone 6 also error 4013, i already try to fix it with itunes but still it can't. Now in my screen still stuck at red itunes logo. Do i must change my HDD ? Please help...Tq
this video is bullshit, the one that measure at the beginning has display ic attached and baseband cpu removed, but the cpu being remove is totally different board without display chip and metal shield at baseband still attached
I had this problem and tried everything..... if you have tried everything then don't despair, if you have the iPad with a mobile sim, take out the sim and try starting up... this worked for me instantly....you don't need to do this.... you will mess up....
Hey up just a heads up if this error keeps happening during restore process what I found to be cause of the problem for me was a faulty charging port it would pick up in iTunes fine however my device had liquid damage from previous owner and things I tried were replacing LCD new battery even removing screen and try restoring it without screen to no avail either error code 9 or 4013 would always appear, however I tried heating the charging port up and progress on restoring was going a bit further than previous attempt, so out of the blue decided on swapping the charging port for a known working 1 and first attempt it booted after restore in iTunes with no error code just thought I'd pass my findings on I'm not saying this will fix everyone's 4013 error but if water ingress has occurred it's a high possibility it's the port ;)
I havnt tried this but 5 years later i need to go on my old phone which got damaged by water hopefully this helps me and if it does i thank u alot
Anh cho em hoi.cua hang cua anh nam o dau vay.em co cai iphone 7 bi dut nua day nut home
em cũng hiểu tiếng anh nhưng vẫn thích anh huân lồng tiếng T.T. xem cái clip 7 phút trong im lặng :)) nó cứ thế nào ý
Anh huân cho em hỏi tý. lấy ổ cứng từ main xác thay sang main sống rồi có phải làm gì nữa không anh. hay là phải đổi s/n cho nó trước khi đóng vào main sống hả anh.
+Thắng Thắng doi trung voi imei
+iFixit.vn Lam sao de doi s/n vay a Huan? co the nao a huong dan cho minh hoc hoi voi nha !
what is the knife blade did you use?
please tell me the solution for iphone 5 c time not changing issue..I replaced y2 .dfu mode software change everything .Still same issue
Chào mừng bạn! Nhiệt độ của máy sấy tóc là gì? Và sức mạnh của không khí là gì?
bro whats the problem ipad mini changed nand flesh memory but its dfu mode so its showing error4005,4014 do u have any solution for this problem please bro i am waiting for ur replay
what temperature do you use on the heatgun?!
awsome job man, one question.... what temperature do you use for desoldering the CPU ?
Jesus P. i use 380 on 2-2.5 flow and have found that good.
i was lifting pads when hotter
That heatsink for RAM is crap.
You`re heating the RAM+CPU from above. so the RAM and CPU must get really hot, in order for the heat to transfer to the solder under the CPU.
you didnt get the point. He heats up the board with cpu , that heat sink is important otherwise your ram will go POP :) and you are done :)
chia sẻ của anh rất hay
Cho em xin.gió chuẩn nhiệt chuẩn với ạ
ip6 lổi 4014 làm chân a8 có vượt được lổi khong vay anh huan hay phai thay a8 vay anh
hen xui ban oi
nice cam and tools......but??
Em cũng học sữa. Anh bán cho em it main ip 6 ạ
hi there
how to check if nand has failed and need replacing
iphone 6 error 4014 what can i do ? problem is nand ? please tell me sir.
You showed us that you can remove the CPU . So what ?
Anyone can do that .
Then ???
How reballin the second floor the processor? I can not put the memory to the processor. help me!!
4013 sữa nhiêu tiền anh Huân?
Tq
so the solution is to remove the process and to put it back ?
nếu muốn lồng tiếng phải có tiền cho người làm video
ram ko có chữa ah.nhiều cây vừa đặt khò là ram sình bụng.cũng chã hiểu.A.huân nghiên cứu dùi lỗ trên ram cho nó xì hơi khỏi phù làm clip cho ae học hỏi;
+Thuan Bui Duc dán cach nhiet lên sẽ hạn chế. Nhung hạn chế đụng chip A vì đâm đầu vào nó chả khác gì lủi vào cột điện trong khi con đường vẩn còn thênh thang.
+iFixit.vn chip A8 thay bao nhieu a huan oi
+an lam 7trieu. co main mới keng luon
+iFixit.vn A Huan lam clip cho iphone 5s 4013, 4014, 4005 duoc khong? Minh co cai iphone 5s bi loi nay khong reset duoc.Cam on a H nhieu
+iFixit.vn có thông tin liên lạc với a ko a huân ơi
What?? Sao ko chụp cho xem cái main.? Chắc đứt chân nen che lại quá
My iphone 6 also error 4013, i already try to fix it with itunes but still it can't. Now in my screen still stuck at red itunes logo. Do i must change my HDD ? Please help...Tq
i have the same problem with my iphone 6 still error 4005 you have any idea please?
temperature when removing?
turks lee 380 2, or 2.5 aire
K có tiếng vậy a
What is error 1413??? Why I keep receiving this messages??
Чувак проверяет одну плату, выпаевает ЦПУ с другой платы, какой смысл видео, то что он паять умеет.
I want change the battery is now on and off I now connect to computer is now write error 4013
camera nét quá anh :D
Khò nóng như vậy không biết cpu có die ko các bác
Thanks
fabulous
I just through mine in a lake... it felt good
How many degrees of hair?
I usually like getting my hair cut around 70 degrees. Hope this helps!
:)
Robert LMAO XD dont tell him that hes going to try prying the CPU off the board at 70c now
Chơi kịch câm với tiếng anh ko
this video is bullshit, the one that measure at the beginning has display ic attached and baseband cpu removed, but the cpu being remove is totally different board without display chip and metal shield at baseband still attached
bác không nói tiếng việt ah
what is mean blue is nc
NC is pin not used. nothing funtion
+iFixit.vn Thanks great video and you soldering technics are higher.GOD bless you and thanks to teach us you skills
+Raul Morel nc means not connected