Very innovative project and I like the result but please consider working more safely. I saw a lot of potential for some crippling injuries in this video. It doesn’t matter how skilled or experienced you are when that table saw blade grabs you.
You do know that this video is 2x times speed up.....??? If you look at the equipment that this person is working on he never had a thought about a sawstop Or safety mechanisms and is probably more careful than anybody working on stuff in 2021.... at the end of the day it's usually not the machine it's about who's operating in the machine👍🏽 in other words "y'all" be safe out there😉💯🙌🏽🌎
Wat I would have done is instead of the rubber band holding the top piece down,i would just drill a hole in the back threw to the main piece and push a bolt into the hole and it will stay in place,then do the same when you put a tablet in the holder
No introduction, measurements, types of bolts, materials list, tools list, price, no useful hints or audible words of instruction. Just go get your full shop, and do it. I will just make one myself and do a video with step-by-step instructions.
![Wall Mounted Laptop Articulating Arm│벽걸이 노트북 관절 거치대 모니터암 [woodworks/목공 DIY]](http://i.ytimg.com/vi/3Ogx9FaMlNY/mqdefault.jpg)
![Articulating Arm mount holder for Tablet & Phone [woodworks]](http://i.ytimg.com/vi/s_m_KIjnIz8/mqdefault.jpg)
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
Amazing diy phone holder. But please consider to use a push stick in the table saw
Wish i could get things done in warp speed...Love using reclaimed materials, everyone needs to learn that hack.
Very innovative project and I like the result but please consider working more safely. I saw a lot of potential for some crippling injuries in this video. It doesn’t matter how skilled or experienced you are when that table saw blade grabs you.
You do know that this video is 2x times speed up.....??? If you look at the equipment that this person is working on he never had a thought about a sawstop Or safety mechanisms and is probably more careful than anybody working on stuff in 2021.... at the end of the day it's usually not the machine it's about who's operating in the machine👍🏽 in other words "y'all" be safe out there😉💯🙌🏽🌎
Hermoso trabajo. Felicitaciones!!!!
Nice work 👍
😅😅 this cellphone holder is to the higher level 😄❤️❤️
Gloves and a router, you my friend have the Balls of Bond.....James Bond.
That's awesome man
That was an awsome video and a cool extension arm. Nice job.
The tools used are expensive and some are not sold everywhere. How do we want to make all the tools used to make the tablet stand?
Muy buenas ideas, pero creo que le estamos dando mas importancia a un simple aparato que a lo que realmente se necesita
The start kinda sounded like when you build something in lego videogames
Wat I would have done is instead of the rubber band holding the top piece down,i would just drill a hole in the back threw to the main piece and push a bolt into the hole and it will stay in place,then do the same when you put a tablet in the holder
I didn’t think of that great idea maybe will change
Muito bom, parabéns!
Very good thing
Hazlo tu mismo¿ Es fácil con ese arsenal de máquinas,
I would never let my fingers get that close to a blade, just saying, as Juliano says, get a push stick
Nice.
13:38 nice 👍🔥
This is easy sir.
What are these gloves? Would they protect you from cutting your fingers by the saw?
wow very nice, i want to make it. thanks
Amazing,, I need that for me activities,, pls,, re watching,,
Nice one, mate
todo bien gracias
Pero.sete.olvido.
Las medidas.delos.
largeros.i.elkuadro.base.😮
God job
Yep that was easy...
Nice 👍
Beautiful work sir please keep it up
Está chido pero faltó las medidas del brazo
Porque trabaja con guantes? No sería muy recomendable
Muito bom
That ok...!!!
awesome
Thank you so much ❤️
Semangat bos
Parabéns pelo trabalho
Keep it up please.. Brother,,
Porq no proporcionas las medidas amigo sería muy buena idea gracias
Nice
Круто
Nos daría las medidas...
Gracias
What are the length of those sticks / arms
Hi i think the long ones are 20” and small ones are about 12” hope it helps I didn’t measure i just went of the cuff
@@ThinkMakeShare thank you
Good Working
Is this diy?
Amazing
Just Speedy Gonzalez Assembly no measurements 😜
4:16 Peligro compañero.
Левша может, если захочет
nice make up LOL 🤪😂
Marvelous Job Mate...
👍👍Thanks for a nice and interesting video.
Watch till the end. Woodworking serial killer. Did you wear the serial killer mask the whole time??
💪 Great job
👍👍👍👍
Buddy, don't wear gloves, it's dangerous!
13:24 y ahora ✊✊✊✊✊💧💧💧
Hahah... ¡Que flojera!
Ahora... haz una que se pueda sostener desde la hamaca y no del piso, mesa y pared.
Eso, si seria un reto!
2:08 whats name the tools? Answer plz
Palm sander
I bought Stodoys once and now I have lifetime access to thousands of woodworking projects.
Learn from japanese.. They would have made it that simpler and handy
Not 360 bad 😞😞😞
All the hard work only to lie in bed and watch movies until late night?! *#
Not movies…. TH-cam videos about tools and building things to research for the next project…. Like YOU did watching this video.
4x speed 🤣🤣
а почему в маске? стыдишься своей работы?
I have done copy your ide
Video malísimo. No enseña nada. Además muy rápido. Y de medidas de seguridad ni hablamos
Pra que essa mascara eh bandido eh 😈😈😈
J
I don't understand
No introduction, measurements, types of bolts, materials list, tools list, price, no useful hints or audible words of instruction. Just go get your full shop, and do it. I will just make one myself and do a video with step-by-step instructions.
🫂🫂🫂🫂🫂🫂🫂
Para ver bien cómodos películas sexys😳
🤣🤣🤣
This is some stupid Bob the builder crap
Если честно просто какой та фигня сколько труд и очень много место занимает.. фигня
Nice
👌