Нормальный принтер, ходят миллионы пробега, у меня с пробегом 1800000, и до сих пор нормально работает, аппараты очень надежные и хорошие, не то что бытовые, для дома это просто зверь.
He says that the transfer roller is used to stop toner from falling into the power supply.. That's not the function of the transfer roller. It's function is to charge the paper so that it will attract the toner to it from the photoconductor. Also, each chip has a page count, and if you swap the chip it will only work up to the point that it runs out of pages allowed. It will eventually lock up and the printer will not function until you swap it out with another chip.. Furthermore, not all compatible cartridges are of equal quality. Some remanufacturers produce excellent quality compatibles. You just need to know which companies follow stringent production guidelines and which do not. The savings is worth the effort for MOST monochrome printers. Find a vendor who not only sells the cartridges, but also backs them up with quality technical support, and great customer service... I didn't watch the remainder of the video since so many inaccuracies occurred from the onset...
Excellent video with informative content. Question - does the transfer roller clip into a replaceable clip or is it clipping into the molded chassis? (on the left-hand side of the transfer roller.
At the hospital I work they have 475 of these..It an easy fix machine and I have many tricks to make and save money. I've been fixing printers since 1979. I also have 2 personally...i like tham.
Can you offer tips why once you disassemble the 4014-4015 fuser it doesn't wake up again.i think issues with the thermostat.Ive had a 4200, 4345 mfp which have done more than 5 million prints without ever changing the fuser only Teflon change and this fire up without issues but the 4015 dtn am at the third fuser which I shipped in from China but it only did about 700 pgs and a 50.2 error could you give some insight into the secret behind this fails and how to fix them.Thanks
I appreciate the time youve taken to make the video. They indeed not as good as the 4000 series which I still service which are 12 years old. But such a low life expectancy? Not quite. Ive seen them with 800,000+ with little more care than maintenance kits, oem cartridges, and no user stupidity.
4015 printer new fuser half way printing and out of the blue stop mid printing , 50.2 error , noted that once you disassemble this fuser to either change the Teflon never works again 50. Errors occur, any idea how to fix this issues
I'm thinking the most detrimental effect on this machine is this technician working on them. They have issues, no doubt, but saying the end of life is 300K? That's the maintenance kit interval, not end of life.
yeah, as a tech i can say these and the 602's are some of the easiest machines to keep running. virtually bullet proof. i have 17 year old machines that run 24/7 in a hospital and still going strong. i disagree with his assessment.
The reason you have toner everywhere is because most cartridge rebuilders are too lazy to replace the "felt" seals on each end of the developer roller inside the cartridge. Thus it leaks toner like crazy. We always take a newly opened cartridge and tap it on a flat surface after pulling the toner release strap. If it is going to leak you can actually see the toner leak from the cartridge when tapping it on a table. If it does demand a refund and/or replacement.
I have a lot of these in my territory, but they are mostly new and not had many calls on them yet, so just looking ahead. Have you heard of first print coming out of low power mode having a smudge or line, then the rest print fine?
This guy is clueless. 300 copy is maintenance cycle not end of life. It may need maintenance kit and cleaning. It is a little noisy but it a good printer. Please don't post this kind video if you don't what you are doing.
Нормальный принтер, ходят миллионы пробега, у меня с пробегом 1800000, и до сих пор нормально работает, аппараты очень надежные и хорошие, не то что бытовые, для дома это просто зверь.
I have about 15 of these printers and they have been working for 4 years with non oem cartridges. All working well.
He says that the transfer roller is used to stop toner from falling into the power supply.. That's not the function of the transfer roller. It's function is to charge the paper so that it will attract the toner to it from the photoconductor. Also, each chip has a page count, and if you swap the chip it will only work up to the point that it runs out of pages allowed. It will eventually lock up and the printer will not function until you swap it out with another chip.. Furthermore, not all compatible cartridges are of equal quality. Some remanufacturers produce excellent quality compatibles. You just need to know which companies follow stringent production guidelines and which do not. The savings is worth the effort for MOST monochrome printers. Find a vendor who not only sells the cartridges, but also backs them up with quality technical support, and great customer service... I didn't watch the remainder of the video since so many inaccuracies occurred from the onset...
thank you it helped me to fix my problem :)
Excellent video with informative content. Question - does the transfer roller clip into a replaceable clip or is it clipping into the molded chassis? (on the left-hand side of the transfer roller.
At the hospital I work they have 475 of these..It an easy fix machine and I have many tricks to make and save money. I've been fixing printers since 1979. I also have 2 personally...i like tham.
I have two of these where the paper will not enter the paper feed. I have replaced the paper feed assembly and tray 1 assembly. Any ideas?
So , you're familiar with CX
Can you offer tips why once you disassemble the 4014-4015 fuser it doesn't wake up again.i think issues with the thermostat.Ive had a 4200, 4345 mfp which have done more than 5 million prints without ever changing the fuser only Teflon change and this fire up without issues but the 4015 dtn am at the third fuser which I shipped in from China but it only did about 700 pgs and a 50.2 error could you give some insight into the secret behind this fails and how to fix them.Thanks
Over 600000 pages. That is amazing. If you hate HP printers so much, what brand and model do you like?
I appreciate the time youve taken to make the video. They indeed not as good as the 4000 series which I still service which are 12 years old. But such a low life expectancy? Not quite. Ive seen them with 800,000+ with little more care than maintenance kits, oem cartridges, and no user stupidity.
4015 printer new fuser half way printing and out of the blue stop mid printing , 50.2 error , noted that once you disassemble this fuser to either change the Teflon never works again 50. Errors occur, any idea how to fix this issues
I'm thinking the most detrimental effect on this machine is this technician working on them. They have issues, no doubt, but saying the end of life is 300K? That's the maintenance kit interval, not end of life.
yeah, as a tech i can say these and the 602's are some of the easiest machines to keep running. virtually bullet proof. i have 17 year old machines that run 24/7 in a hospital and still going strong. i disagree with his assessment.
Where can I find the driver for HP Laserjet P4015 on W7 64 bit? Thk
Thank you for this video, I've like 8 suckers like this one at work and I'm the one in charge of its survival.
Gracias por compartir.
I got a new fuser kit put I keep getting and it keeps getting paper jams. I have changed it b4 but I never had this issue can u maybe help
The reason you have toner everywhere is because most cartridge rebuilders are too lazy to replace the "felt" seals on each end of the developer roller inside the cartridge. Thus it leaks toner like crazy. We always take a newly opened cartridge and tap it on a flat surface after pulling the toner release strap. If it is going to leak you can actually see the toner leak from the cartridge when tapping it on a table. If it does demand a refund and/or replacement.
I have a lot of these in my territory, but they are mostly new and not had many calls on them yet, so just looking ahead. Have you heard of first print coming out of low power mode having a smudge or line, then the rest print fine?
at the hospital they always broke the trays...easy fix...just screw a self-tapping screw to secure the papersize stopper in place....5 second fix
can you feed the paper in the manual feed?
Hi can you tell me if it is normal when the printer smokes when printing and smells strongly of burned toner but does
your vendor sees you coming...hahahaha
How then do I solve the problem?
sorry my computer shut down, lol is it normal for printer to smoke and smell very strong of burned toner?
What a complete ignoramus!
Light bulbs in the fuser?! It uses a ceramic element!
I tried to source those vacuums you cant get them in Australia, I don't do that anymore, I get special cleaning wipes from hp.
Law? Doubt it. The remanufacturer has to reset the number of pages. Some tips but this is one of the faster printers HP made.
Can you still get shocked if its not plugged in for a year. I wanna take my hp printer like this one apart.
Promise me this is a joke. Either way, as a comedian or a technician, this person needs to find a new line of work.
I was going to get one of them to replace my 4300 but I have 2nd thoughts now.
hahaha service tech...you're obviously a parts changer....hahahaha
This guy is clueless. 300 copy is maintenance cycle not end of life. It may need maintenance kit and cleaning. It is a little noisy but it a good printer. Please don't post this kind video if you don't what you are doing.
it's a good printer
364A catridges
The WORST business class printer HP ever made, BY FAR.
Todd Baum is correct...this guy has no clue as to what he's talking about.
This guy is clueless.