So thorough, any one who can't follow this needs to let someone else adjust their lights for them. Thanks again for another fine video. Now if I could just close my door without slamming it shut.
The door issue I have is the door sags down from front to back. I replaced the hinge with another from a yard thinking the bushing was worn and it was. I replaced the lock which had been damaged with wear. Taped the striker down a little and now have it very close to shutting properly. The repair guide says "adjust front to back with door to body bolts, but I have not special tool to make this adjustment. Do I have to remove wheel fender to get to these bolts ?
how to adjust headlight beam for toyota corolla 1991? to make the beam higher. is it clockwise or counter clock wise? is it the same for left and right? tnx
There is a video I shot this a.m. to show the issue I having with the door on my 2001 Carolla LE. Look on my channel for it. If you leave a comment I will know that you saw it.
this mechanism is very bad....i have exuctly the same color but in model 1998 and the headlights are working in same way just in a diffrent form. conactions to mian lights are use to melt from heat and the motors the changing to angel of light are failed-the problem start whene you try to change the angel of light been the motors have some kind of half free axels that not all time going back to same level as in the begining..
A 15 minute video to highlight a 30 second task. How do you expect to get an accurate alignment when your headlamp is attached the the body with a cable-tie. Use an M10x25 bolt with two penny washers and a nyloc nut to make a decent repair. An 8mm ring spanner would make the job a lot simpler.
A good attempt but your language is poor and you take too long to explain a simple activity. You also didn't state what distance the car is from the wall.
Thank you very much. People like you are the constructive citizens.
Thanks, Your support is Great. :-)
So thorough, any one who can't follow this needs to let someone else adjust their lights for them. Thanks again for another fine video. Now if I could just close my door without slamming it shut.
Watching this 10 years ltr and its still aplicable today. im grateful to u for sharing your knowledge. Thank u thank u thank u?
Wonderful!
Thanks for feedback. And please could send more info your car's door issue. Is door too down or up ?
Thank you for this video! It's exactly what I needed.
You are Welcome. :-)
Thank you. When i put LED in people would flash high beams thinking i had my high beams on but i just need to shine them more towards the ground
Appreciate this video . Its one of my problem when i bought DEPO HL for my corolla lovelife 99 model
Noted 😀👍
I just take my 1999 corolla out from paint workshop.. One of the headlight fly up,, I will do this procedure tomorrow,,, thank you it's very helpful
Glad it helped
The door issue I have is the door sags down from front to back. I replaced the hinge with another from a yard thinking the bushing was worn and it was. I replaced the lock which had been damaged with wear. Taped the striker down a little and now have it very close to shutting properly. The repair guide says "adjust front to back with door to body bolts, but I have not special tool to make this adjustment. Do I have to remove wheel fender to get to these bolts ?
Hi, could you please send some photos or video on your door issue. That how door issue happens.
Light check on upper or Dipper for adjusting
Hi, Thanks for your video. It shows that your door is twisted. I try to create video, where I bend the door.
Sir how about Toyota Corolla Ae92
Thank You.
Thank you so much, I will be doing this myself on my 2012 corolla. I installed LED low beams and i dont want to drive other drivers.
Good 👍
Exelente información mi amigo gracias
Good comment, Thanks 👍
how to adjust headlight beam for toyota corolla 1991? to make the beam higher. is it clockwise or counter clock wise? is it the same for left and right? tnx
Yes, You are right. :-)
I'd love to do that. I know how to attach photos to email but not how to respond to you tube posts with photos.
Is this toyota ae112 rosso?
How is it possible that every Corolla with new lamps from 2000-2001 has broken upper connection with frame?
Mine are Frozen to the point where I can can't turn the screw, is there a way to replace that adjustment screw that holds the headlight to the frame?
Thanks man
+sachith jayawarna Thanks for feed back. :-)
Can you please tell me what you are doing. Is that screw used for rotating the bulb or changing direction from up to down. please explain i need help
noted 👍
Scion tC headlights adjust the same way. They were set too low, and I couldn't see where I was going, because these headlights have no spill.
TheSuburban15 Thank You for feedback.
I'm looking for directions for a 2007 Toyota Camry to adjust headlights up and down.
Hi, I will do this video in Future.
I am also looking for how to adjust 2004 toyota camry spyder headlight.
There is a video I shot this a.m. to show the issue I having with the door on my 2001 Carolla LE. Look on my channel for it. If you leave a comment I will know that you saw it.
Thank You Peter
Thanks 👍😀
If using LED bulb, the light dispersed uneven and very dificult to adjust. Do you have any idea.?
👍😀
thank you very very much
thanks man
Good 👍
the left light should be lower so you dont shine incoming drivers in the face. good video though
Thank You for feedback. :-)
How far is the vehicle from the wall? How high is the wall
Noted 👍
this mechanism is very bad....i have exuctly the same color but in model 1998 and the headlights are working in same way just in a diffrent form.
conactions to mian lights are use to melt from heat and the motors the changing to angel of light are failed-the problem start whene you try to change the angel of light been the motors have some kind of half free axels that not all time going back to same level as in the begining..
+Asaf Drinkman Thank You for feedback. :-)
Actually the correct method is not with a wrench but a Philips screwdriver 90 degrees into the slot on top of the screw/8mm bolt
Noted and Thanks 👍
Easier to just use a phillips screwdriver.
Thanks Sir.
I got a 99 and the screws are way diffrent
Thank You for comment. 😊
I have a 98 Corolla
+Aaron Aaron Thanks and many Thanks for comment. :-)
does it go left and right?
Yes
ok thank you! great job by the way! 👍🏼
A 15 minute video to highlight a 30 second task.
How do you expect to get an accurate alignment when your headlamp is attached the the body with a cable-tie.
Use an M10x25 bolt with two penny washers and a nyloc nut to make a decent repair.
An 8mm ring spanner would make the job a lot simpler.
Thanks ! 👍😃
Douche. Stop crying
Toyota avensis
👍
Drake
Thanks for comment. :-)
That that that???? Huh🤔😑 I I I???
Good comment and Let's All folk discuss more 👍😀
Extremely painful to watch could not make it past a few minutes listening to his Russian studdar
Ok
A good attempt but your language is poor and you take too long to explain a simple activity. You also didn't state what distance the car is from the wall.